MATERIAL SAFETY DATA SHEET MSDS Number: 336410TMCA
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name: TIME MIST METERED AIR FRESHENER - ALL FRAGRANCES AND SIZES (30% VOC COMPLIANT)
Manufactured by: Waterbury Companies, Inc. 24-Hour Emergency Contact:
P.O. Box 640 800-424-9300 or 703-527-3887
(CHEMTREC)
Independence, LA 70443
2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components greater than 1.0% (0.1% if carcinogen or suspected carcinogen)
% by wt.
Component CAS# OSHA PEL ACGIH TLV Other Limits
1,1-Dif luoroethane 75-37-6 N.E. N.E. AEL (Dupont) 1000ppm 45-55
C12-C15 Isoparaf f inic Hy drocarbon 64742-47-8 N.E. N.E. 152 ppm (Exxon) 5-15
Isopropanol 67-63-0 400 ppm 400 ppm 500 ppm ACGIH STEL 25-35
Perf ume Oils-Supplier Trade Secret N/A N.E. N.E. N.E. 5-15
3. HAZARDS IDENTIFICATION
Warning! Flammable!
Contents under pressure, do not expose to fire or extreme heat.
Read label. Use caution when installing; product contains an eye irritant. This product is designed for use in the Automatic Aerosol Dispenser. One unit per 6,000
cubic feet should be considered as an average need. Keep in mind that factors such as air flow, size of space, humidity, and room temperature all affect odor
control. Do not allow spray to contact plastic, painted, or varnished surfaces.
Potential Health Effects:
Routes of Entry: Inhalation: Yes Ingestion: Yes Skin: Yes
Health Hazards: Acetone is irritating and may possibly cause injury to the eyes if not removed promptly. Acetone may have effects on the liver and kidney.
Humans with liver or kidney disease may be at increased risks due to this potential effect.
Signs/symptom of
s High vapor concentrations may cause upper respiratory tract irritation, narcosis (sleepiness, dizziness , etc.), and eye irritation. Prolonged
skin contact may cause mild to moderate local redness and swelling. Contact with eyes may cause severe irritation, experienced as
overexposure:
discomfort or pain, excessive blinking and tear production, with marked excess redness and swelling of the conjunctiva. Corneal injury may
occur.
Medical conditions aggravated by Skin contact may aggravate an existing dermatitis.
exposure:
NFPA Hazard Ratings Fire: 4 Health: 1 Reactivity: 0
NFPA 704 Ratings are subject to interpretation and are only intended for general identification of the level of the specific hazard. All information m be
ust
considered for proper safe handling of the material.
4. FIRST AID MEASURES
IF SWALLOWED: Immediately call a poison control center or doctor. Do not induce vomiting unless tol d to do so by a poison control center or doctor. Do not give
any liquid to the person. Do not give anything by mouth to an unconscious person. IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an
ambulance, then give artificial respiration, preferably by mouth-to-mouth, if possible. Call a poison control center or doctor for further treatment advice. IF ON
SKIN OR CLOTHING: Remove contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for
treatment advice. IF IN EYES: Hold eye/s open and rinse slowly and gently with water for 15-20 minutes . Remove contact lenses, if present after first five minutes,
then continue rinsing eye. Call a poison control center or doctor for treatment advice. HOT LINE NUM BER: Have the product container or label with you when
calling or going for treatment. For emergency information, call (985) 878-6751, Monday through Friday, 8:00 am to 4:30 pm CST. After 4:30 pm call poison control
center. For product information call (203) 597-1812, Monday - Friday 8:00am to 5:00 pm EST. NOTE T O PHYSICIAN: Contains petroleum distillate- vomiting may
cause aspiration pneumonia hazard.
5. FIRE FIGHTING MEASURES
Extinguishing Media: CO2, dry chemical or foam
Fire Fighting Procedures: Self contained air supply suggested. Keep containers cool to avoid bursting.
Unusual Fire and Explosion Hazards: Exposure to temperatures above 120 deg.F may cause bursting.
6. ACCIDENTAL RELEASE MEASURES
If container is ruptured or begins to leak, place in a well-ventilated area free of spark and ignition sourc es. Any remaining liquid should be collected with absorbent
media. Dispose of unusable concentrate and absorbent media in accordance with Local, State and Federal regulations.
7. HANDLING AND STORAGE
Do not contaminate water, food or feed by storage or disposal. Store in a cool, dry area away from heat or open flame. Exposure to temperatures above 120 deg.F.
may cause bursting. Do not install directly over any food handling or dispensing area.
NFPA 30B Aerosol Classification: Level 1 Aerosol
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Protective Gloves: Not required - avoid contact with skin.
Eye Protection: Safety glasses recommended when installing new container to avoid possible contact with eyes.
Respiratory Protection: Not required - avoid breathing spray.
Revision Date: 1/8/2008 Date Printed: 1/9/2008 Page 1 of 2
MATERIAL SAFETY DATA SHEET MSDS Number: 336410TMCA
Ventilation: Local: Not required.
Mechanical: Not required.
Other protective equipment: N/A
Protective Work/Hygiene Practices: Follow label instructions.
9. PHYSICAL AND CHEMICAL PROPERTIES
Specific Gravity (H2O=1): 0.87 Flashpoint: Not applicable LEL: N/A
Vapor Pressure (m Hg):
m N.E. Boiling Point: N.E. Melting Point: N.E. UEL: N/A
Solubility: Slightly soluble Appearance/Odor: Clear, colorless liquid with characteristic perfume odor.
10. STABILITY AND REACTIVITY
Conditions to Avoid: Heat, sparks, and open flame.
Incompatible Materials: Oxidizing materials, alkalis, acids, chlorinated compounds.
Hazardous Decomposition By-products: May liberate Carbon monoxide, and carbon dioxide.
Hazardous Polymerization Conditions: None known.
11. TOXICOLOGICAL INFORMATION
This product contains no chemicals that are listed on the NTP, IARC, or OSHA carcinogen lists. Any further information on the toxicology of the material can be
obtained by contacting the manufacturer.
12. ECOLOGICAL INFORMATION
Please call the manufacturer for questions concerning the ecological effects of this product and it's constituents.
13. DISPOSAL CONSIDERATIONS
Empty the can by using the product according to the label. DO NOT PUNCTURE OR INCINERATE! "Empty" cans may contain residue. Avoid exposure to heat,
flame, sparks, and other sources of ignition. IF EMPTY: Place in trash or offer for recycling if available. IF PARTLY FILLED: Call your local solid waste agency or
1-800-CLEANUP for disposal instructions.
14. TRANSPORT INFORMATION
Status Shipping Name Class ID Number Pack Grp
DOT (USA): Regulated Consumer Commodity (per 49CFR173.306) ORM-D N/A N/A
IATA (Air): Regulated Consumer Commodity 9 ID8000 N/A
IMDG (Vessel): Regulated Aerosols 2 UN1950 N/A
National Motor Freight Classification and LTL Class: 57100 Sub 3 Class 60
15. REGULATORY INFORMATION
SARA Title III Section 312: When completing Tier II reports, the following information should be used.
Note: See state and local regulations for specifics on reporting requirements for your facility.
This product should be described as: PURE: N MIXTURE: Y SOLID: N LIQUID: Y GAS: Y
Physical Hazards: FIRE: Y PRESSURE: Y REACTIVITY: N Health Hazards: IMMEDIATE: Y DELAYED: N
16. OTHER INFORMATION
Product Sales Information: 800-845-3495
MSDS Information: 985-878-6751
Revision Notes: Review of MSDS
MSDS Prepared by SW
N/A = Not Applicable N.E. = Not Established WATCO PART #: 38MS336410TMCA
This Information is provided in good faith, but no warranty, expressed or implied, is made. The manufac turer believes that it is accurate and to the best of its
knowledge, and relates only to the specific m aterial designated herein.
Revision Date: 1/8/2008 Date Printed: 1/9/2008 Page 2 of 2
|