TECHNICAL DATA
Product Line: VALGARD 130
Product Number: EEY0095
Product Description: VALGARD 130 3.5 VOC YELLOW EPOXY PRIMER
Physical Properties: Component A Component B Mixed
EEY0095 CEC0056 Components
Viscosity (#3 Zahn @ 77F): 12-16 seconds --- seconds 15-19 seconds
Weight Per Gallon (Theoretical): 12.74 lbs./gal. 8.06 lbs./gal. 12.31 lbs./gal.
Solids by Weight (Theoretical): 71.60% 56.67% 70.71%
Solids by Volume (Theoretical): 49.02% 54.98% 49.57%
VOC (Theoretical): 3.62 lbs./gal. 3.49 lbs./gal. ---
VOC (Actual): --- --- 3.50 lbs./gal max.
HAPs Content (lbs/solid gallon): --- --- .36 lbs.
Mix Ratio: --- --- 10:1 by volume
Pot Life (to Double Viscosity): --- --- Spray within 12 hrs at 70掳F
(gels at 48 hrs)
Spray within 6 hrs. at 100掳F
(gels at 20 hrs).
Application Recommendations:
Substrate/Pretreatment: --- --- Pretreated Steel
Reduction: --- --- As Needed
Reduction Solvent: --- --- Ketones or Aromatics
Application: --- --- Air spray/air-assisted
airless
Clean-Up Solvent: --- --- Ketones, Aromatics
Cure Schedule: --- --- 20' @ 130掳F
Air Dry at 77掳F, 1 mil DFT: --- --- 40鈥? dry to touch
Film Properties:
Dry Film Thickness: --- --- 1.0-1.5 mils
Coverage @ 1 mil DFT: --- --- 795.12 sq. ft./gal.
Issue Date: January 25, 2005
The Valspar Corporation, Minneapolis, MN 1-800-328-8044
The data on this sheet represent typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide.
Valspar assumes no obligation or liability for use of this information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this product is the replacement of the defective product, or a refund of its
purchase price, at our option. 27MAR02
The Valspar Corporation
Material Safety Data Sheet
1. PRODUCT AND COMPANY IDENTIFICATION
Material Identification
Product ID: EEY0095
Product Name VALGARD 130 YELLOW EPOXY PRIMER
Product Use: Paint product.
Print date 2005/03/11
Revision Date 2005/02/03
Company Identification
The Valspar Corporation
1101 Third Street South
Minneapolis, MN 55415
Manufacturer's Phone: 1-612-332-7371
24-Hour Medical Emergency 1-888-345-5732
Phone:
2. COMPOSITION / INFORMATION ON HAZARDOUS INGREDIENTS
Common Name approx. Chemical name
CAS-No. Weight %
Trade Secret : 10 - 15 PROPRIETARY RESIN
PROPRIETARY RESIN
BUTYL ACETATE 10 - 15 n-Butyl acetate
123-86-4
METHYL N-AMYL KETONE 5 - 10 Methyl n-amyl ketone
110-43-0
ZINC OXIDE PIGMENT 5 - 10 Zinc oxide
1314-13-2
Trade Secret : 5 - 10 PROPRIETARY PIGMENT
PROPRIETARY PIGMENT
AROMATIC NAPHTHA, 1-5 SOLVENT NAPHTHA, PETROLEUM, HEAVY AROM
HEAVY
64742-94-5
METHYL PROPYLKETONE 1-5 Methylpropyl ketone
107-87-9
NAPHTHALENE .1 - 1 Naphthalene
91-20-3
FORMALDEHYDE 0 - .1 Formaldehyde
50-00-0
If this section is blank there are no hazardous components per OSHA guidelines.
3. HAZARDS IDENTIFICATION
Primary Routes of Exposure:
Product ID: EEY0095
Page 1 of 8
Inhalation
Ingestion
Skin absorption
Emergency Overview:
This section not in use.
This product contains ingredients that may contribute to the following potential acute health effects:
Inhalation Effects:
May cause systemic toxicity.
Eye Contact:
May cause eye burns. May cause severe eye irritation. Corneal Injury/eye damage.
Skin Contact:
May cause moderate skin irritation. May cause skin sensitization. May cause dermatitis. May cause an allergic skin
reaction.
Acute Ingestion:
May cause liver and kidney damage. May cause central nervous system depression.
Other Effects:
May cause liver damage.
This product contains ingredients that may contribute to the following potential chronic health effects:
Notice: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain
and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful
or fatal. This product contains ingredients which may produce an allergic respiratory response. Treat as a respiratory
sensitizer.May cause eye damage and pain.Contains a component which is a known or suspected skin sensitizer.Suspect
cancer hazard. Contains ingredients which may cause cancer. Risk of cancer depends upon the duration and level of
exposure. Possible sensitization. Contains formaldehyde which is considered a potential carcinogen by the Occupational
Health and Safety Administration.
See Section 11 for toxicological information about Mutagens, Teratogens and Carcinogens.
If this section is blank, no information is available.
4. FIRST AID MEASURES
Inhalation:
If affected by inhalation, move victim to fresh air. If symptoms persist, seek medical attention. If inhaled, remove to fresh
air. If not breathing give artificial respiration, preferably mouth-to-mouth. If breathing is difficult give oxygen. Get medical
attention.
Eye Contact:
In case of contact, or suspected contact, immediately flush eyes with plenty of water for at least 15 minutes and get
medical attention immediately after flushing. If irritation persists, consult a physician. Flush with plenty of low pressure
water for 15 minutes, occasionally lifting eye lids.
Skin Contact:
In case of contact, immediately flush skin with plenty of soap and water for at least 15 minutes. If irritation persists get
medical attention. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean
contaminated shoes. Destroy contaminated leather apparel.
Product ID: EEY0095
Page 2 of 8
Ingestion:
If swallowed, get medical attention immediately. If swallowed , do not induce vomiting. Give large quantities of water. If
available, give several glasses of milk. Never give anything by mouth to an unconscious person. Get medical attention
immediately.
Medical conditions aggravated by exposure: Any respiratory or skin condition.
5. FIRE FIGHTING MEASURES
Flash point (Fahrenheit): 102潞 F ( 39潞 C) TCC/PM
Lower explosive limit: 1%
Upper explosive limit: 9%
Autoignition temperature: Not available.潞 F ( 潞 C)
Sensitivity to impact: No.
Sensitivity to static discharge: Can be sensitive to static discharge hazards. Please see bonding and
grounding information in Section 7.
Hazardous combustion products: See Section 10.
Unusual fire and explosion hazards:
None known.
Extinguishing media:
Carbon dioxide, dry chemical, foam and/or water fog.
Fire fighting procedures:
Use water spray to cool nearby containers and structures exposed to fire.
6. ACCIDENTAL RELEASE MEASURES
Action to be taken if material is released or spilled:
Ventilate area. Avoid breathing of vapors. Use self-containing breathing apparatus or airmask for large spills in a confined
area. Wipe, scrape or soak up in an inert material and put in a container for disposal. See section 5, "Unusual Fire and
Explosion Hazards", for proper container and storage procedures. Remove sources of ignition. Remove with inert
absorbent and non sparking tools. Avoid all personal contact.
7. HANDLING AND STORAGE
Precautions to be taken in handling and storage:
Keep away from heat, sparks, and flames. Keep container closed when not in use. Do not store above 120 degrees F. (49
degrees C). Based on flash point and vapor pressure, suitable storage should be provided in accordance with OSHA
regulation 1910.106, Ontario OH&S regulation 851 section 22. Empty containers may contain product residue, including
flammable or explosive vapors. Do not cut, puncture or weld on or near container. All label warnings must be observed
until the container has been commercially cleaned or reconditioned. If the product is used near or above the flashpoint, an
ignition hazard may be present. Activities, uses, or operations which liberate vapor (such as mixing or free fall of liquids)
may also present an ignition hazard. Please ensure containers and other interconnected equipment are properly bonded
and grounded at all times.
8. PERSONAL PROTECTIVE EQUIPMENT AND EXPOSURE CONTROLS
Personal Protective Equipment
Eye and face protection:
Product ID: EEY0095
Page 3 of 8
Avoid contact with eyes. Wear chemical goggles if there is the possibility of contact or splashing in the eye.
Skin protection:
Gloves: Neoprene or other nonporous.Neoprene or plastic apron and protective clothing covering exposed skin areas.
Respiratory protection:
If exposure cannot be controlled below applicable limits, use the appropriate NIOSH approved respirator such as an air
purifying respirator with organic vapor cartridge and dust/mist filter. Consult the respirator manufacturer's literature to
ensure that the respirator will provide adequate protection. Read and follow all respirator manufacturer's instructions.
Ventilation
Required when spraying or applying in confined area. Ventilation equipment should be explosion proof.
Exposure Guidelines
OSHA Permissible Exposure Limits (PEL's)
Common Name approx. TWA (final) Ceilings limits (final) Skin designations
CAS-No. Weight %
BUTYL ACETATE 10 - 15 710 MGM3 150 ppm
123-86-4
METHYL N-AMYL KETONE 5 - 10 465 MGM3 100 ppm
110-43-0
ZINC OXIDE PIGMENT 5 - 10 5 MGM3 Respirable
1314-13-2 fraction.
15 MGM3 Total dust.
5 MGM3 Fume.
Respirable fraction.
Listed.
Total dust. Listed.
Trade Secret : 5 - 10 5 MGM3 Respirable
PROPRIETARY PIGMENT fraction.
15 MGM3 Total dust.
Respirable fraction.
Listed.
Total dust. Listed.
METHYL PROPYLKETONE 1-5 700 MGM3 200 ppm
107-87-9
NAPHTHALENE .1 - 1 50 MGM3 10 ppm
91-20-3
FORMALDEHYDE 0 - .1 0.75 ppm
50-00-0
ACGIH Threshold Limit Value (TLV's)
Common Name approx. TWA STEL Ceiling limits Skin
CAS-No. Weight % designations
BUTYL ACETATE 10 - 15 150 ppm 200 ppm
123-86-4
METHYL N-AMYL KETONE 5 - 10 50 ppm
110-43-0
Product ID: EEY0095
Page 4 of 8
ZINC OXIDE PIGMENT 5 - 10 10 MGM3 10 MGM3
1314-13-2 Inhalable Respirable
particles. fraction.
3 MGM3
Respirable
particles.
2 MGM3
Respirable
fraction.
Trade Secret : 5 - 10 10 MGM3
PROPRIETARY PIGMENT Inhalable
particles.
3 MGM3
Respirable
particles.
METHYL PROPYLKETONE 1-5 200 ppm 250 ppm
107-87-9
NAPHTHALENE .1 - 1 10 ppm 15 ppm Can be absorbed
91-20-3 through the skin.
FORMALDEHYDE 0 - .1 0.3 ppm
50-00-0
If this section is blank, no information is available.
9. PHYSICAL PROPERTIES
Odor: Normal for this product type.
Physical State: Liquid
pH: Not determined.
Vapor pressure: 28 mmHG @ 68潞 F ( 20潞 C)
Vapor density (air = 1.0): 4.7
Boiling point: 213潞 F ( 101潞 C)
Solubility in water: Insoluble.
Coefficient of water/oil distribution: Not determined.
Density (lbs per US gallon): 12.74
Specific Gravity 1.53
Evaporation rate (butyl acetate = 1.0): 2.3
10. STABILITY AND REACTIVITY
Stability Stable
Conditions to Avoid: None known.
Incompatibility: Strong oxidizers.
Hazardous Polymerization: None anticipated.
Hazardous Decomposition Products: Carbon monoxide and carbon dioxide. Metal oxide fumes.
Sensitivity to static discharge: Can be sensitive to static discharge hazards. Please see bonding and grounding
information in Section 7.
11. TOXICOLOGICAL INFORMATION
Mutagens:
Product ID: EEY0095
Page 5 of 8
Teratogens:
Carcinogens:
Possible cancer hazard. Contains ingredients which may cause cancer based on animal data. Risk to your health
depends upon the level and duration of exposure.
Common Name approx. IARC Group 1 - Human IARC Group 2A - IARC Group 2b -
CAS-No. Weight % Evidence limited human data sufficient animal data
NAPHTHALENE .1 - 1 POSSIBLY
91-20-3 CARCINOGENIC IN
HUMANS BASED ON
ANIMAL STUDIES
FORMALDEHYDE 0 - .1 MONOGRAPH 62,
50-00-0 1995
Common Name approx. NTP Known NTP Suspect NTP Evidence of
CAS-No. Weight % carcinogens carcinogens carcinogenicity
FORMALDEHYDE 0 - .1 Anticipated
50-00-0 carcinogen.
Common Name approx. OSHA Select OSHA Possible select ACGIH Carcinogens
CAS-No. Weight % carcinogens carcinogens
FORMALDEHYDE 0 - .1 Potential cancer Group A2 Suspected
50-00-0 hazard. human carcinogen.
If this section is blank, no information is available.
12. ECOLOGICAL DATA
Not available at this time.
13. DISPOSAL CONSIDERATIONS
Disposal should be made in accordance with federal, state and local regulations.
14. TRANSPORTATION INFORMATION
U.S. Department of Transportation
Proper Shipping Name: PAINT
Hazard Class: 3
UN ID Number: UN1263
Packing Group: III
49 CFR Hazardous Material Regulations Parts 100-180
The supplier will apply the combustible liquid exception in 49 CFR 173.150(f), limited quantity or "does not sustain
combustion" exceptions and consumer commodity rules, when authorized. Please check 49 CFR Parts 100-180 to
determine if the use of these exceptions applies to your shipments when re-shipping our products.
International Air Transport Association:
Proper Shipping Name: PAINT
Product ID: EEY0095
Page 6 of 8
Hazard Class: 3
UN ID Number: UN1263
Packing Group: III
International Maritime Organization:
Proper Shipping Name: PAINT
Hazard Class: 3
UN ID Number: UN1263
Packing Group: III
15. REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS:
Common Name approx. SARA 302 SARA 313 CERCLA RQ IN LBS.
CAS-No. Weight %
BUTYL ACETATE 10 - 15 5000
123-86-4
ZINC OXIDE PIGMENT 5 - 10 YES
1314-13-2
NAPHTHALENE .1 - 1 form R reporting 100
91-20-3 required for 1.0% de
minimis concentration
FORMALDEHYDE 0 - .1 Listed. form R reporting 100
50-00-0 required for 0.1% de
minimis concentration
SARA 311/312 Hazard Class:
Acute: Yes
Chronic: Yes
Flammability: Yes
Reactivity: No
Sudden Pressure: No
U.S. STATE REGULATIONS:
Pennsylvania Right To Know:
METHYL PROPYLKETONE 107-87-9
METHYL N-AMYL KETONE 110-43-0
BUTYL ACETATE 123-86-4
ZINC OXIDE PIGMENT 1314-13-2
PROPRIETARY PIGMENT Trade Secret
PROPRIETARY RESIN Trade Secret
FORMALDEHYDE 50-00-0
AROMATIC NAPHTHA, HEAVY 64742-94-5
Additional Non-Hazardous Materials
PROPRIETARY INERT Trade Secret
WOLLASTONITE 13983-17-0
CALCIUM CARBONATE 471-34-1
PROPRIETARY PIGMENT Trade Secret
PROPRIETARY RESIN Trade Secret
Product ID: EEY0095
Page 7 of 8
California Proposition 65:
WARNING: This product contains chemicals known to the State of California to cause cancer.
Rule 66 status of product Photochemically reactive.
INTERNATIONAL REGULATIONS - Chemical Inventories
TSCA Inventory: All components of this product are in compliance with U.S. TSCA Chemical
Substance Inventory Requirements.
Canada Domestic Substances List: All components of this product are listed on the Domestic Substances List.
16. OTHER INFORMATION
HMIS Codes
Health: 3
Flammability: 2
Reactivity: 1
PPE: X - See Section 8 for Personal Protective Equipment (PPE).
Abbreviations:
OSHA - Occupational Safety and Health Administration, IARC - International Agency for Research on Cancer, NIOSH -
National Institute of Occupational Safety and Health, NTP - National Toxicology Program, ACGIH - American Conference
of Governmental Industrial Hygienists, SCAQMD - South Coast Air Quality Management District, TSCA - Toxic
Substances Control Act, IATA - International Air Transport Association, IMO - International Maritime Organization, DOT -
Department of Transportation, NA - Not applicable, NOT ESTAB - Not established, N.A.V. - Not available, RQ -
Reportable quantity, WT - Weight, MG/CU M - Milligrams per cubic meter, G/L - Grams per liter, MM - Millimeters,
MPPCF - Millions of particles per cubic foot, PPM - parts per million, PPT - parts per thousand, TCC/PM - Tag closed
cup / Pensky-Martens, PB - Lead, PEL - Permissible exposure level, TWA - Time Weighted Average, STEL - Short term
exposure limit, C - Celsius, F - Fahrenheit.
Disclaimer:
The data on this sheet represent typical values. Since application variables are a major factor in product performance, this
information should serve only as a general guide. Valspar assumes no obligation or liability for use of this information.
UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. VALSPAR WILL NOT BE
LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this
product is the replacement of the defective product, or a refund of its purchase price, at our option. This MSDS contains
additional information required by the state of Pennsylvania.
Product ID: EEY0095
Page 8 of 8
The Valspar Corporation
Material Safety Data Sheet
1. PRODUCT AND COMPANY IDENTIFICATION
Material Identification
Product ID: CEC0056
Product Name: EPOXY PRIMER CURING AGENT
Product Use: Paint product.
Date Published: 2004/01/30
Revision Date: 2004/01/30
Company Identification
The Valspar Corporation
1101 Third Street South
Minneapolis, MN 55415
Manufacturer's Phone: 1-612-332-7371
24-Hour Medical Emergency 1-888-345-5732
Phone:
2. COMPOSITION / INFORMATION ON HAZARDOUS INGREDIENTS
Common Name Approx Chemical name
CAS # Wt%
Trade Secret : 25 - 30 PROPRIETARY RESIN
PROPRIETARY RESIN
Trade Secret : 20 - 25 PROPRIETARY RESIN
PROPRIETARY RESIN
N-BUTYL ALCOHOL 20 - 25 n-Butyl alcohol
71-36-3
BENZYL ALCOHOL 20 - 25 Benzyl alcohol
100-51-6
Trade Secret : 1-5 PROPRIETARY ADDITIVE
PROPRIETARY ADDITIVE
If this section is blank there are no hazardous components per OSHA guidelines.
3. HAZARDS IDENTIFICATION
Primary Routes of Exposure:
Inhalation
Ingestion
Skin absorption
Emergency Overview:
This section not in use.
This product contains ingredients that may contribute to the following potential acute health effects:
Product ID: CEC0056
Page 1 of 7
Inhalation Effects:
Harmful if inhaled. May affect the brain, nervous system, or respiratory system, causing dizziness, headache, nausea or
respiratory irritation.
Eye Contact:
Corneal Injury/eye damage. May cause eye damage and pain.
Skin Contact:
Contains a component which is a known or suspected skin sensitizer. Harmful if absorbed through the skin. May cause
skin burns.
Acute Ingestion:
May cause burns of the mouth, throat and stomach. Irritation of gastrointestinal tract.
Other Effects:
Contains ingredients which are corrosive.
This product contains ingredients that may contribute to the following potential chronic health effects:
Notice: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain
and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful
or fatal. Effects may be permanent. Overexposure may cause allergic respiratory reaction. This product contains
ingredients which may produce an allergic respiratory response. Treat as a respiratory sensitizer.May cause eye damage
and pain.Contains a component which is a known or suspected skin sensitizer.May cause liver damage. Hearing loss. May
cause kidney damage. Possible sensitization.
See Section 11 for toxicological information about Mutagens, Teratogens and Carcinogens.
If this section is blank, no information is available.
4. FIRST AID MEASURES
Inhalation:
If inhaled, remove to fresh air. If not breathing give artificial respiration, preferably mouth-to-mouth. If breathing is difficult
give oxygen. Get medical attention. If affected by inhalation, move victim to fresh air. If symptoms persist, seek medical
attention.
Eye Contact:
In case of contact, or suspected contact, immediately flush eyes with plenty of water for at least 15 minutes and get
medical attention immediately after flushing.
Skin Contact:
In case of contact, immediately flush skin with plenty of soap and water for at least 15 minutes. If irritation persists get
medical attention. Remove contaminated clothing and launder before reuse. Remove contaminated shoes and discard.
Ingestion:
If swallowed, contact medical personnel immediately to determine best course of action.
Medical conditions aggravated by exposure: Any respiratory or skin condition.
5. FIRE FIGHTING MEASURES
Flash point (Fahrenheit): 99潞 F ( 37潞 C) TCC/PM
Product ID: CEC0056
Page 2 of 7
Lower explosive limit: 1%
Upper explosive limit: 11 %
Autoignition temperature: Not available.潞 F ( 潞 C)
Sensitivity to impact: No.
Sensitivity to static discharge: Subject to static discharge hazards. Please see bonding and grounding
information in Section 7.
Hazardous combustion products: See Section 10.
Unusual fire and explosion hazards:
None known.
Extinguishing media:
Carbon dioxide, dry chemical, foam and/or water fog.
Fire fighting procedures:
Use water spray to cool nearby containers and structures exposed to fire. Firefighters should be equipped with self-
contained breathing apparatus and turn out gear.
6. ACCIDENTAL RELEASE MEASURES
Action to be taken if material is released or spilled:
Ventilate area. Avoid breathing of vapors. Use self-containing breathing apparatus or airmask for large spills in a confined
area. Wipe, scrape or soak up in an inert material and put in a container for disposal. See section 5, "Unusual Fire and
Explosion Hazards", for proper container and storage procedures. Remove sources of ignition. Remove with inert
absorbent and non sparking tools. Avoid all personal contact.
7. HANDLING AND STORAGE
Precautions to be taken in handling and storage:
Keep away from heat, sparks, and flames. Keep container closed when not in use. Do not store above 120 degrees F. (49
degrees C). Based on flash point and vapor pressure, suitable storage should be provided in accordance with OSHA
regulation 1910.106, Ontario OH&S regulation 851 section 22. If the product is used near or above the flashpoint, an
ignition hazard may be present. Activities, uses, or operations which liberate vapor (such as mixing or free fall of liquids)
may also present an ignition hazard. Please ensure containers and other interconnected equipment are properly bonded
and grounded at all times. Empty containers may contain product residue, including flammable or explosive vapors. Do
not cut, puncture or weld on or near container. All label warnings must be observed until the container has been
commercially cleaned or reconditioned.
8. PERSONAL PROTECTIVE EQUIPMENT AND EXPOSURE CONTROLS
Personal Protective Equipment
Eye and face protection:
Wear chemical goggles with splash shields or face shield. Contact lenses should not be worn when working with
chemicals because contact lenses may contribute to the severity of an eye injury in case of exposure.
Skin protection:
Gloves: Neoprene or other nonporous.Neoprene or plastic apron and protective clothing covering exposed skin areas.
Respiratory protection:
If exposure cannot be controlled below applicable limits, use the appropriate NIOSH approved respirator such as an air
purifying respirator with organic vapor cartridge and dust/mist filter. Consult the respirator manufacturer's literature to
ensure that the respirator will provide adequate protection. Read and follow all respirator manufacturer's instructions.
Product ID: CEC0056
Page 3 of 7
Ventilation
Required when spraying or applying in confined area. Ventilation equipment should be explosion proof. Eliminate ignition
sources.
Exposure Guidelines
OSHA Permissible Exposure Limits (PEL's)
Common Name Approx TWA (final) Ceilings limits (final) Skin designations
CAS # Wt%
N-BUTYL ALCOHOL 20 - 25 100 ppm TWA; 300 50 PPM SKIN, OSHA
71-36-3 mg/m3 TWA
ACGIH Threshold Limit Value (TLV's)
Common Name Approx TWA STEL Ceiling limits Skin
CAS # Wt% designations
N-BUTYL ALCOHOL 20 - 25 50 PPM (C 50 ppm) (skin) - potential
71-36-3 for cutaneous
absorption
If this section is blank, no information is available.
9. PHYSICAL PROPERTIES
Odor: Normal for this product type.
Physical State: Liquid
pH: Not determined.
Vapor pressure: 8 mmHG @ 70潞 F ( 21潞 C)
Vapor density (air = 1.0): 5
Boiling point: 212潞 F ( 100潞 C)
Solubility in water: Insoluble.
Coefficient of water/oil distribution: Not determined.
Density (weight per gallon): 8.06
Specific gravity (water = 1): 0
Evaporation rate (butyl acetate = 1.0): .5
10. STABILITY AND REACTIVITY
Stability: This product is stable.
Conditions to Avoid: None known.
Incompatibility: Strong oxidizers.
Hazardous Polymerization: None anticipated.
Hazardous Decomposition Products: Carbon monoxide and carbon dioxide. Ammonia compounds. Nitrogen
compounds.
Sensitivity to static discharge: Subject to static discharge hazards. Please see bonding and grounding
information in Section 7.
11. TOXICOLOGICAL INFORMATION
Product ID: CEC0056
Page 4 of 7
If this section is blank, no information is available.
12. ECOLOGICAL DATA
Not available at this time.
13. DISPOSAL CONSIDERATIONS
Disposal should be made in accordance with federal, state and local regulations.
14. TRANSPORTATION INFORMATION
U.S. Department of Transportation
Proper Shipping Name: CORROSIVE LIQUID, FLAMMABLE N.O.S.
Hazardous Ingredient (Land) 1 N-BUTYL ALCOHOL
Hazardous Ingredient (Land) 2 TRIETHYLENE TETRAMINE
Hazard Class: 8
Subsidiary Risk: 3
UN ID Number: UN2920
Packing Group: II
49 CFR Hazardous Material Regulations Parts 100-180
The supplier will apply the combustible liquid exception in 49 CFR 173.150(f), limited quantity exceptions and consumer
commodity rules, when authorized. Please check 49 CFR Parts 100-180 to determine if the use of these exceptions
applies to your shipments when re-shipping our products.
International Air Transport Association:
Proper Shipping Name: CORROSIVE LIQUID, FLAMMABLE N.O.S.
IATA N.O.S. Technical Name 1 N-BUTYL ALCOHOL
IATA N.O.S. Technical Name 2 TRIETHYLENE TETRAMINE
Hazard Class: 8
Subsidiary Risk: 3
UN ID Number: UN2920
Packing Group: II
International Maritime Organization:
Proper Shipping Name: CORROSIVE LIQUID, FLAMMABLE N.O.S.
IMDG N.O.S. Technical Name 1 N-BUTYL ALCOHOL
IMDG N.O.S. Technical Name 2 TRIETHYLENE TETRAMINE
Hazard Class: 8
Subsidiary Risk: 3
UN ID Number: UN2920
Packing Group: II
15. REGULATORY INFORMATION
Product ID: CEC0056
Page 5 of 7
U.S. FEDERAL REGULATIONS:
Common Name Approx SARA 302 SARA 313 CERCLA RQ IN LBS.
CAS # Wt%
Trade Secret : 25 - 30
PROPRIETARY RESIN
Trade Secret : 20 - 25
PROPRIETARY RESIN
N-BUTYL ALCOHOL 20 - 25 form R reporting 5000
71-36-3 required for 1.0% de
minimis concentration
BENZYL ALCOHOL 20 - 25
100-51-6
Trade Secret : 1-5
PROPRIETARY ADDITIVE
SARA 311/312 Hazard Class:
Acute: Yes
Chronic: Yes
Flammability: Yes
Reactivity: No
Sudden Pressure: No
U.S. STATE REGULATIONS:
Pennsylvania Right To Know:
BENZYL ALCOHOL 100-51-6
PROPRIETARY ADDITIVE Trade Secret
N-BUTYL ALCOHOL 71-36-3
PROPRIETARY RESIN Trade Secret
PROPRIETARY RESIN Trade Secret
Rule 66 status of product Not photochemically reactive.
INTERNATIONAL REGULATIONS - Chemical Inventories
TSCA Inventory: All components of this product are in compliance with U.S. TSCA Chemical
Substance Inventory Requirements.
Canada Domestic Substances List: Not all components in this product are listed on the Domestic Substances List.
16. OTHER INFORMATION
HMIS Codes
Health: 3
Flammability: 3
Reactivity: 1
PPE: X - See Section 8 for Personal Protective Equipment (PPE).
Product ID: CEC0056
Page 6 of 7
Abbreviations:
OSHA - Occupational Safety and Health Administration, IARC - International Agency for Research on Cancer, NIOSH -
National Institute of Occupational Safety and Health, NTP - National Toxicology Program, ACGIH - American Conference
of Governmental Industrial Hygienists, SCAQMD - South Coast Air Quality Management District, TSCA - Toxic
Substances Control Act, IATA - International Air Transport Association, IMO - International Maritime Organization, DOT -
Department of Transportation, NA - Not applicable, NOT ESTAB - Not established, N.A.V. - Not available, RQ -
Reportable quantity, WT - Weight, MG/CU M - Milligrams per cubic meter, G/L - Grams per liter, MM - Millimeters,
MPPCF - Millions of particles per cubic foot, PPM - parts per million, PPT - parts per thousand, TCC/PM - Tag closed
cup / Pensky-Martens, PB - Lead, PEL - Permissible exposure level, TWA - Time Weighted Average, STEL - Short term
exposure limit, C - Celsius, F - Fahrenheit.
Disclaimer:
The data on this sheet represent typical values. Since application variables are a major factor in product performance, this
information should serve only as a general guide. Valspar assumes no obligation or liability for use of this information.
UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. VALSPAR WILL NOT BE
LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this
product is the replacement of the defective product, or a refund of its purchase price, at our option. This MSDS contains
additional information required by the state of Pennsylvania.
Product ID: CEC0056
Page 7 of 7
|