Registered Quality System ISO 9001
QMI Certificate #004008
Toronto, Ontario, Canada
Material Safety Data Sheet
Revision Date Prepared by Technical Information
June 15th, 2005 David MacKinnon 1-800-201-8822 or support@mgchemicals.com
Head Office Emergency
9347 - 193 Street, Surrey, B.C., Canada V4N 4E7 Phone Canutech (613) 996-6666 Collect 24 hrs
For updates please download from www.mgchemicals.com or fax requests to 1-800-708-9888
Section 1: Product Identification
MSDS Code: 4226 Name: Super Corona Dope
Related Part Numbers: 4226-55ML; 4226-1L; 4226-4L
Use: High voltage protective coating for pc boards.
Section 2: Hazardous Ingredients
CAS# Chemical Name Percentage by weight ACGIH TWA Osha Pel Osha Stel
1330-20-7 xylenes 15 - 40 100ppm 100ppm 150ppm
Section 3: Hazards Identification
WHMIS Codes: B2, D2A
NFPA Ratings: Health 2 Flammability 3 Reactivity 0
HMIS Ratings: Health 1 Flammability 4 Reactivity 0
Eyes: May cause eye irritation and conjuctivitis.
Skin: Possible absorption through skin. Prolonged exposure will de-fat skin producing flaky cracking
dermatitis.
Inhalation: Harmful if inhaled. May cause nausea, dizziness, hallucinations, headache, and loss of coordination.
Ingestion: Harmful if swallowed. Burning in mouth, stomach. May cause headache, dizziness, nausea, vomiting,
and abdominal pain. May cause central nervous system depression.
Chronic: No effects known.
Section 4: First Aid Measure
Eyes: Remove contact lenses. Flush with water or saline. Get medical aid.
Skin: Wash skin with large quantities of soap and water. Remove contaminated clothing. Get medical aid if
symptoms persist.
Inhalation: Immediately remove from exposure to fresh air.
Ingestion: Do not induce vomiting. Keep person warm. Get medical aid.
Section 5: Fire Fighting Measures
Autoignition
272掳C Flash Point: 29 LEL / UEL: 1/ 7
Temperature:
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
Vapor is heavier than air and may travel along the ground or may be moved by
General Information:
ventilation and ignited.
PAGE 1 / 4 MSDS Code: High Insulating Varnish
Registered Quality System ISO 9001
QMI Certificate #004008
Toronto, Ontario, Canada
Section 6: Accidental Release Measures
Spill Remove all sources of ignition. Provide adequate ventilation. Wear appropriate personal protection.
Procedure: Sprinkle absorbent compound onto spill, then sweep into a plastic or metal container. Wipe up further
residue with paper towel and place in container. Wash spill area with soap and water.
Section 7: Handling and Storage
Handling: Wash thoroughly after handling. Avoid contact with eyes, skin, and clothing. Do not ingest or inhale. Do
not expose container to heat or flame.
Storage: Keep away from sources of ignition. Store in a cool, dry, well ventilated area, away from incompatible
substances. Keep from freezing.
Section 8: Exposure Controls
Routes of Eyes, ingestion, inhalation, and skin.
entry:
Ventilation: Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure
limits.
Personal Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective
Protection: clothing to prevent skin contact. Use a NIOSH approved respirator when necessary.
Section 9: Physical and Chemical Properties
Physical Clear Odor: n/e Solubility: insoluble Evaporation 9.5
State: liquid Rate: (Eth=1)
Boiling 137掳C Specific 0.929 Vapor 1 PSI Vapor 3.66 pH: n/e
Point: Gravity: Pressure: @20掳C Density: (Air=1)
Section 10: Stability and Reactivity
Stability: Stable at normal temperatures and pressures.
Conditions to Temperatures over 40掳C, ignition sources, strong oxidizing agents and incompatible
avoid: substances.
Incompatibilities: Strong acids, bases, oxidizing agents, sodium, barium, and aluminum.
Polymerization: Will not occur.
Carbon monoxide, carbon dioxide, and water. Toxic vapors possible due to incomplete
Decomposition:
combustion.
Section 11: Toxicological Information
Sensitization: (effects of repeated
Prolonged or repeated skin contact may cause dermatitis.
exposure)
Carcinogenicity: (risk of cancer) No
Teratogenicity: (risk of malformation in No
an unborn fetus)
This product contains xylene, a known embryotoxin. Pregnant women
Reproductive Toxicity: (risk of sterility)
must avoid all contact with this product.
Mutangenicity: (risk of heritable genetic
No
effects)
Lethal Exposure Ingestion(LD50): 4300 Inhalation 5000 Skin n/e
Concentrations: mg/kg (rat) (LC50): ppm/4h (LD50):
PAGE 2 / 4 MSDS Code: High Insulating Varnish
Registered Quality System ISO 9001
QMI Certificate #004008
Toronto, Ontario, Canada
Section 12: Ecological Information
General Avoid runoff into storms and sewers which lead into waterways. Water runoff can cause
Information: environmental damage.
Environmental Impact Data: (percentage by weight)
CFC: 0 HFC: Cl.Solv.: 0 VOC: 65 HCFC: 0 ODP: 0
Section 13: Disposal Information
General Dispose of in accordance with all local, provincial, state, and federal regulations. Water runoff
Information: can cause environmental damage.
Section 14: Transportation Information
Ground: (All sizes 4 liters or less)
Consumer Commodity / ORM-D.
Air:
Shipper must be trained and certified. Refer to IATA regulations, UN# 1263, packing groups 3.
Sea:
Shipper must be trained and certified. Refer to IMDG regulations. Limited Quantity, UN# 1263, Paint.
Section 15: Regulatory Information
This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.
SARA (Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
None of the chemicals in this product have a reportable quantity.
EPCRA (Emergency Planning and Right to Know Act, USA, 40 CFR 372.45
This product does not contain any chemicals subject to the reporting requirements of section 313 Title III of the
SARA of 1986 and 40 CFR part 372
TSCA (Toxic Substances Control Act of 1976, USA)
All substances are TSCA listed.
CAA (Clean Air Act, USA)
This product does not contain any class 1 ozone depletors.
This product does not contain any class 2 ozone depletors.
This product does not contain any chemicals listed as hazardous air pollutants.
California Proposition 65 (Chemicals know to cause cancer or reproductive toxicity, May 1, 1997 revision, USA)
This product does not contain any chemicals listed.
Health Canada
Labeling and containers used in this product are listed in compliance with Consumer Chemicals and Container
regulations.
Environment Canada
Chemicals in this product are listed on the Domestic Substances List in the Canadian Environmental Protection Act
This product does not contain any ozone depleting substances.
Industry and Science Canada
Labeling, product identity, net quantity declaration, minimum printing type size heights, and packaging of this
product is in compliance with the Consumer Packaging and Labeling Act and Regulations. This product is not slack
filled in accordance to chapter 4 prohibitions.
PAGE 3 / 4 MSDS Code: High Insulating Varnish
Registered Quality System ISO 9001
QMI Certificate #004008
Toronto, Ontario, Canada
RoHS (The restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2004).
This product is RoHS compliant.
Section 16: Other Information
Definitions: n/a = not applicable, n/e = not established
Disclaimer: This material safety data sheet is provided as an information resource only. M.G. Chemicals believes the
information contained herein is accurate and compiled from reliable sources. It is the responsibility of
the user to verify its validity. The buyer assumes all responsibility of using and handling the product in
accordance with federal, state, and local regulations.
PAGE 4 / 4 MSDS Code: High Insulating Varnish
|