Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Material Safety Data Sheet
Revision Date Prepared by Technical Information
January 2, 2008 Patti Rogers 1-800-201-8822 or support@mgchemicals.com
Head Office Emergency
9347 - 193 Street, Surrey, B.C., V4N 4E7 Phone Canutech (613) 996-6666 Collect 24 hrs
For updates please download from www.mgchemicals.com or fax requests to 1-800-708-9888
Section 1: Product Identification
MSDS Code: 8339A Name: Conductive Coating
Related Part Numbers: 8339
Related Part Name: Rubber Keypad Repair Kit
Use: For repairing keypads on remote controls.
Section 2: Hazardous Ingredients
CAS# Chemical Name Percentage by weight ACGIH TWA Osha Pel Osha Stel
3 3
7440-22-4 Silver 27 - 32 1mg/m 1mg/m N/e
108-88-3 Toluene 14 鈥? 22 50ppm 100ppm 150ppm
67-64-1 2-propanone 7 鈥? 13 750ppm 1000ppm 1000ppm
123-86-4 n-butyl acetate 48 - 53 150ppm 150ppn 200ppm
64-17-5 Ethyl alcohol 5 鈥? 10 200ppm 200ppm 250ppm
141-78-6 Ethyl acetate 2鈥?7 400ppm 400ppm N/e
110-43-0 2-heptanone 2鈥?7 50ppm 100ppm N/e
110-19-0 2-methylproply ester acetic acid 2鈥?7 150ppm 150ppm N/e
67-63-0 2-propanol 0.1 鈥? 1 400ppm 400ppm 500ppm
108-65-6 1-methoxy-2 propanone acetate 0.1 - 1 N/e N/e N/e
Section 3: Hazards Identification
WHMIS Codes: B2, D2A
NFPA Ratings: Health 1 Flammability 3 Reactivity 0
HMIS Ratings: Health 1 Flammability 3 Reactivity 0
Eyes: Liquid in contact with eyes may cause permanent eye damage.
Skin: May cause skin irritation and possible pain and stinging if the skin is abraded.
Inhalation: Solvents may cause respiratory tract irritation, headache, and possible dizziness.
Ingestion: May cause respiratory and digestive tract irritation.
Chronic: Prolonged and repeated exposure may cause dermatitis, defatting of the skin, liver and kidney
damage, and adverse central nervous system effects.
Section 4: First Aid Measure
Eyes: Remove contact lenses. Flush with water or saline for 20 minutes. Get medical aid.
Skin: Wash skin with large amounts of soap and water. Get medical aid if symptoms persist.
PAGE 1 / 4 MSDS Code: 8339A
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Inhalation: Immediately remove from exposure to fresh air. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Get medical aid.
Ingestion: Do not induce vomiting. If conscious, give 1-2 glasses of water. Get medical aid.
Section 5: Fire Fighting Measures
Autoignition Temperature: 465掳C Flash Point: -18掳C LEL / UEL: 1 / 36
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
General Information: Will burn if involved in a fire. Flash back along vapor trail is possible.
Section 6: Accidental Release Measures
Spill Remove all sources of ignition. Provide adequate ventilation. Wear appropriate personal protection.
Procedure: Sprinkle absorbent compound onto spill, then sweep into a plastic or metal container. Wipe up further
residue with paper towel and place in container. Wash spill area with soap and water.
Section 7: Handling and Storage
Handling: Wash thoroughly after handling. Avoid contact with eyes, skin, and clothing. Do not ingest or inhale. Do
not expose container to heat or flame.
Storage: Keep away from sources of ignition. Store in a cool, dry, well-ventilated area, away from incompatible
substances. Keep from freezing.
Section 8: Exposure Controls
Routes of Eyes, ingestion, inhalation, and skin.
entry:
Ventilation: Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure
limits.
Personal Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective
Protection: clothing to prevent skin contact. Use a NIOSH approved respirator when necessary.
Section 9: Physical and Chemical Properties
Physical Liquid Odor: Ethereal Solubility: Partial Evaporation Fast
State: Rate:
Boiling 59掳C Specific 1.14 Vapor 1PSI Vapor 4.1 pH: N/a
Point: Gravity: Pressure: @21掳C Density: (Air=1)
Section 10: Stability and Reactivity
Stability: Stable at normal temperatures and pressures.
Conditions to
Temperatures over 40掳C, ignition sources, and incompatible substances.
avoid:
Alkali and alkaline earth metals, powdered aluminum, zinc, magnesium, and beryllium,
Incompatibilities: lithium aluminum hydride, potassium tert-butoxide, nitrates, strong acids, strong oxidizers,
chlorosulphonic acid, hydrogen peroxide.
Polymerization: Will not occur.
Decomposition: Carbon monoxide, carbon dioxide, nitrogen oxides
PAGE 2 / 4 MSDS Code: 8339A
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Section 11: Toxicological Information
Sensitization: (effects of repeated
Prolonged or repeated skin contact may cause dermatitis.
exposure)
Carcinogenicity: (risk of cancer) No
Teratogenicity: (risk of malformation in This product contains xylene, a known embryo toxin. Pregnant women
an unborn fetus) must avoid all contact with this product.
Toluene is listed under California Proposition 65 under chemicals
Reproductive Toxicity: (risk of sterility)
known to cause reproductive toxicity.
Mutangenicity: (risk of heritable genetic
No
effects)
Lethal Exposure Ingestion 7400 mg/kg Inhalation 16000 Skin N/e
Concentrations: (LD50): (rat) (LC50): ppm/4h (rat) (LD50):
Section 12: Ecological Information
General Avoid runoff into storms and sewers, which lead into waterways. Water runoff can cause
Information: environmental damage.
Environmental Impact Data: (percentage by weight)
CFC: 0 HFC: Cl.Solv: 0 VOC: 70 HCFC: 0 ODP: 0
Section 13: Disposal Information
General Dispose of in accordance with all local, provincial, state, and federal regulations. Water runoff
Information: can cause environmental damage.
Section 14: Transportation Information
This product is only to be shipped within the MG Chemicals Conductive Keypad Repair Kit, part number
8339
Ground:
Consumer commodity / ORM-D
Air:
Shipper must be trained and certified. Refer to IATA Dangerous Goods Regulations. Ship as 鈥淒angerous goods in
excepted quantities鈥?, Class 3, PG II
Sea:
Refer to IMDG regulations. Shipping name: Limited quantity (paint), UN 1263, Class 3, PG II, Flash point 鈥?18掳C,
Storage category 鈥淎鈥?.
Section 15: Regulatory Information
This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.
RoHS (The restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2004).
This product is RoHS compliant.
SARA (Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
The product contains the following chemicals subject to the reporting requirements of section 313 Title III of the
SARA of 1986 and 40 CFR part 372: Silver CAS# 7440-22-4 (27-32%) and 2-Propanol CAS# 67-63-0 (0.1-1%)
EPCRA (Emergency Planning and Right to Know Act, USA, 40 CFR 372.45
The product contains the following chemicals subject to the reporting requirements of section 313 Title III of the
SARA of 1986 and 40 CFR part 372: Silver CAS# 7440-22-4 (27-32%) and 2-Propanol CAS# 67-63-0 (0.1-1%)
TSCA (Toxic Substances Control Act of 1976, USA)
PAGE 3 / 4 MSDS Code: 8339A
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
All substances are TSCA listed.
CAA (Clean Air Act, USA)
This product does not contain any class 1-ozone depletors.
This product does not contain any class 2-ozone depletors.
This product does not contain a hazardous air pollutant.
California Proposition 65 (Chemicals know to cause cancer or reproductive toxicity, May 1, 1997 revision, USA)
This product contains toluene, which is listed under chemicals known to some states to cause reproductive toxicity
and cancer respectively.
Health Canada
Labeling and containers used in this product are listed in compliance with Consumer Chemicals and Container
regulations.
Environment Canada
Chemicals in this product are listed on the Domestic Substances List in the Canadian Environmental Protection Act
This product does not contain any ozone depleting substances.
Industry and Science Canada
Labeling, product identity, net quantity declaration, minimum printing type size heights, and packaging of this
product is in compliance with the Consumer Packaging and Labeling Act and Regulations. This product is not slack
filled in accordance to chapter 4 prohibitions.
Section 16: Other Information
Definitions: N/a = not applicable, n/e = not established
Disclaimer: This material safety data sheet is provided as an information resource only. M.G. Chemicals believes the
information contained herein is accurate and compiled from reliable sources. It is the responsibility of
the user to verify its validity. The buyer assumes all responsibility of using and handling the product in
accordance with federal, state, and local regulations.
PAGE 4 / 4 MSDS Code: 8339A
|