Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Material Safety Data Sheet
Revision Date Prepared by Technical Information
January 2, 2008 Patti Rogers 1-800-201-8822 or support@mgchemicals.com
Head Office Emergency
9347 - 193 Street, Surrey, B.C., V4N 4E7 Phone Canutech (613) 996-6666 Collect 24 hrs
For updates please download from www.mgchemicals.com or fax requests to 1-800-708-9888
Section 1: Product Identification
MSDS Code: 8339C Name: Contact Cleaner
Related Part Numbers: 8339
Related Part Name: Rubber Keypad Repair Kit
Use: For cleaning the contacts on damaged keypads
Section 2: Hazardous Ingredients
CAS# Chemical Name Percentage by weight ACGIH TWA Osha Pel Osha Stel
67-63-0 2-propanol <99% 400ppm 400ppm 500ppm
Section 3: Hazards Identification
WHMIS Codes: B2, D2B
NFPA Ratings: Health 1 Flammability 3 Reactivity 0
HMIS Ratings: Health 1 Flammability 3 Reactivity 0
Eyes: May cause eye irritation, characterized by a burning sensation, redness, tearing, inflammation, and
possible corneal injury.
Skin: May cause skin irritation with pain and stinging, especially if skin is abraded.
Inhalation: May cause respiratory tract irritation. Inhaling high concentrations may cause central nervous
system effects characterized by headache, and dizziness.
Ingestion: Harmful if swallowed. May cause gastrointestinal irritation with nausea, vomiting, and diarrhea. May
cause central nervous system depression.
Chronic: No effects known.
Section 4: First Aid Measure
Eyes: Remove contact lenses. Flush with water or saline for 20 minutes. Get medical aid.
Skin: Wash skin with large quantities of soap and water. Get medical aid if symptoms persist.
Inhalation: Immediately remove from exposure to fresh air. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Get medical aid.
Ingestion: Do not induce vomiting. If conscious, give 1-2 glasses of water. Get medical aid.
Section 5: Fire Fighting Measures
Autoignition
399掳C Flash Point: 20掳C LEL / UEL: 2 / 12
Temperature:
Extinguishing Use water spray, dry chemical, carbon dioxide, or chemical foam.
PAGE 1 / 4 MSDS Code: 8339C
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Media:
General Will burn if involved in a fire. Vapors can travel to a source of ignition and flash back. This product is
Information: an explosion hazard.
Section 6: Accidental Release Measures
Spill Remove all sources of ignition. Provide adequate ventilation. Wear appropriate personal protection.
Procedure: Sprinkle absorbent compound onto spill, then sweep into a plastic or metal container. Wipe up further
residue with paper towel and place in container. Wash spill area with soap and water.
Section 7: Handling and Storage
Handling: Wash thoroughly after handling. Avoid contact with eyes, skin, and clothing. Do not ingest or inhale. Do
not expose container to heat or flame.
Storage: Keep away from sources of ignition. Store in a cool, dry, well-ventilated area, away from incompatible
substances.
Section 8: Exposure Controls
Routes of Eyes, ingestion, inhalation, and skin.
entry:
Ventilation: Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure
limits.
Personal Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective
Protection: clothing to prevent skin contact. Use a NIOSH approved respirator when adequate ventilation or local
exhaust ventilation to keep airborne concentrations below exposure limits cannot be achieved.
Section 9: Physical and Chemical Properties
Physical Liquid Odor: Alcohol Solubility: Miscible Evaporation 2.8
State: Rate: (ether=1)
Boiling 82掳C Specific 0.875 Vapor 44mmhg Vapor 2.1(Air=1) pH: N/a
Point: Gravity: Pressure: @25掳C Density:
Section 10: Stability and Reactivity
Stability: Stable at normal temperatures and pressures.
Conditions to
Temperatures over 40掳C, ignition sources, and incompatible substances.
avoid:
Strong oxidizers, acetaldehyde, chlorine, ethylene oxide, acids and isocyanates, hydrogen +
palladium, nitroform, oleum, phosgene, oxygen, aluminum, aluminum triisopropoxide,
Incompatibilities:
trinitromethane, barium perchlorate, tetrafluoroborate, chromium trioxide, sodium
dichromate + sulfuric acid.
Polymerization: Will not occur.
Decomposition: Carbon monoxide, carbon dioxide, acrid smoke and fumes.
Section 11: Toxicological Information
Sensitization: (effects of repeated exposure) Repeated skin contact may cause defatting of the skin resulting
in dermatitis.
Carcinogenicity: (risk of cancer) No
Teratogenicity: (risk of malformation in an No
unborn fetus)
PAGE 2 / 4 MSDS Code: 8339C
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Reproductive Toxicity: (risk of sterility) No
Mutangenicity: (risk of heritable genetic effects) No
Lethal Exposure Ingestion 5045 Inhalation 16000 Skin 5030-7900
Concentrations: (LD50): mg/kg (LC50): ppm/8h (LD50): mg/kg
(rat) (rat)
Section 12: Ecological Information
General Avoid runoff into storms and sewers, which lead into waterways. Water runoff can cause
Information: environmental damage.
Environmental Impact Data: (percentage by weight)
CFC: 0 HFC: 0 Cl.Solv: 0 VOC: 100 HCFC: 0 ODP: 0
Section 13: Disposal Information
General Dispose of in accordance with all local, provincial, state, and federal regulations. Water runoff
Information: can cause environmental damage.
Section 14: Transportation Information
This product is only to be shipped within the MG Chemicals Conductive Keypad Repair Kit, part number
8339
Ground:
Consumer commodity / ORM-D
Air:
Shipper must be trained and certified. Refer to IATA Dangerous Goods Regulations. Ship as 鈥淒angerous goods in
excepted quantities鈥?, Class 3, PG II
Sea:
Refer to IMDG regulations. Shipping name: Limited quantity (paint), UN 1263, Class 3, PG II, Flash point 20掳C,
Storage category 鈥淎鈥?.
Section 15: Regulatory Information
This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.
SARA (Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
None of the chemicals in this product have a reportable quantity.
EPCRA (Emergency Planning and Right to Know Act, USA, 40 CFR 372.45
This product does not contain any chemicals subject to the reporting requirements of section 313 Title III of the
SARA of 1986 and 40 CFR part 372.
TSCA (Toxic Substances Control Act of 1976, USA)
All substances are TSCA listed.
CAA (Clean Air Act, USA)
This product does not contain any class 1-ozone depleting substances.
This product does not contain any class 2-ozone depleting substances.
This product does not contain any chemicals listed as hazardous air pollutants.
PAGE 3 / 4 MSDS Code: 8339C
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Section 15: Regulatory Information cont鈥檇
California Proposition 65 (Chemicals know to cause cancer or reproductive toxicity, May 1, 1997 revision, USA)
This product does not contain any chemicals listed.
Health Canada
Labeling and containers used in this product are listed in compliance with Consumer Chemicals and Container
regulations.
Environment Canada
Chemicals in this product are listed on the Domestic Substances List in the Canadian Environmental Protection Act
This product does not contain any ozone depleting substances.
Industry and Science Canada
Labeling, product identity, net quantity declaration, minimum printing type size heights, and packaging of this
product is in compliance with the Consumer Packaging and Labeling Act and Regulations. This product is not slack
filled in accordance to chapter 4 prohibitions.
RoHS (The restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2004).
This product is RoHS compliant.
Section 16: Other Information
Definitions: N/a = not applicable, n/e = not established
Disclaimer: This material safety data sheet is provided as an information resource only. M.G. Chemicals believes the
information contained herein is accurate and compiled from reliable sources. It is the responsibility of
the user to verify its validity. The buyer assumes all responsibility of using and handling the product in
accordance with federal, state, and local regulations.
PAGE 4 / 4 MSDS Code: 8339C
|