Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Material Safety Data Sheet
Revision Date Prepared by Technical Information
January 2, 2008 Patti Rogers 1-800-201-8822 or support@mgchemicals.com
Head Office Emergency
9347 - 193 Street, Surrey, B.C., V4N 4E7 Phone Canutech (613) 996-6666 Collect 24 hrs
For updates please download from www.mgchemicals.com or fax requests to 1-800-708-9888
Section 1: Product Identification
MSDS Code: 8339B Name: Primer Prep
Related Part Numbers: 8339
Related Part Name: Rubber Keypad Repair Kit
Use: For prepping the surface of keypads during the repair process.
Section 2: Hazardous Ingredients
CAS#- Chemical Name Percentage by weight ACGIH TWA Osha Pel Osha Stel
Varies Naphtha 62 - 99 N/e N/e N/e
142-82-5 n-heptane 1 - 36 400ppm 500ppm 500ppm
108-87-2 Methylcyclohexane 0-2 400ppm 500ppm N/e
Section 3: Hazards Identification
WHMIS Codes: B3, D2B
NFPA Ratings: Health 1 Flammability 3 Reactivity 0
HMIS Ratings: Health 2 Flammability 3 Reactivity 0
Eyes: Causes mild to moderate irritation, including stinging, tearing, redness, and swelling
Skin: Causes skin irritation.
Inhalation: May cause central nervous system depression.
Ingestion: Maybe harmful if swallowed. Aspiration may cause lung damage
Chronic: N/e
Section 4: First Aid Measure
Eyes: Remove contact lenses. Flush with water or saline for 15 minutes. Get medical aid.
Skin: Wash skin with large quantities of soap and water. Get medical aid if symptoms persist.
Inhalation: Immediately remove from exposure to fresh air. Get medical aid if symptoms persist.
Ingestion: Do NOT Induce vomiting unless directed to do so by a physician. Get medical aid.
Section 5: Fire Fighting Measures
Autoignition Temperature: N/e Flash Point: 15掳F / -9掳C LEL / UEL: 1.1 / 6.7
Extinguishing Media: Dry chemical, carbon dioxide, foam, or water fog. Water may be
ineffective. Avoid direct water stream.
General Information: N/a
PAGE 1 / 4 MSDS Code: 8339B
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Section 6: Accidental Release Measures
Spill Remove all sources of ignition. Provide adequate ventilation. Wear appropriate personal protection.
Procedure: Sprinkle absorbent compound onto spill, then sweep into a plastic or metal container. Wipe up further
residue with paper towel and place in container. Seal container. Wash spill area with soap and water.
Section 7: Handling and Storage
Handling: Wash thoroughly after handling. Avoid contact with eyes, skin, and clothing. Do not ingest or inhale. Do
not expose container to heat or flame.
Storage: Keep away from sources of ignition. Store in a dry, well ventilated area, away from incompatible
substances, and below 50掳C / 120掳F
Section 8: Exposure Controls
Routes of Eyes, ingestion, inhalation, and skin.
entry:
Ventilation: Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure
limits.
Personal Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective
Protection: clothing to prevent skin contact. Use a NIOSH approved respirator when necessary.
Section 9: Physical and Chemical Properties
Physical Liquid Odor: Mild Solubility: Negligible Evaporation > 1
State: hydrocarbon Rate: (ether=1)
Boiling >90掳C Specific 0.70@20掳C Vapor 44.6 mm Vapor 3.45 pH: N/a
Point: Gravity: Pressure: Hg Density: (Air=1)
@20掳C
Section 10: Stability and Reactivity
Stability: Stable at normal temperatures and pressures.
Conditions to avoid: Temperatures over 50掳C, and ignition sources.
Incompatibilities: Strong oxidizers.
Polymerization: Will not occur.
Decomposition: Carbon monoxide, carbon dioxide.
Section 11: Toxicological Information
Sensitization: (effects of repeated exposure) N/e
Carcinogenicity: (risk of cancer) No
N/e
Teratogenicity: (risk of malformation in an unborn fetus)
Reproductive Toxicity: (risk of sterility) N/e
Mutangenicity: (risk of heritable genetic effects) N/e
Lethal Exposure Ingestion N/e Inhalation N/e Skin N/e
Concentrations: (LD50): (LC50): (LD50):
PAGE 2 / 4 MSDS Code: 8339B
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Section 12: Ecological Information
General Avoid runoff into storms and sewers, which lead into waterways. Water runoff can cause
Information: environmental damage.
Environmental Impact Data: (percentage by weight)
CFC: 0 HFC: 0 Cl.Solv: 0 VOC: 99.9 HCFC: 0 ODP: 0
Section 13: Disposal Information
General Dispose of in accordance with all local, provincial, state, and federal regulations. Water runoff
Information: can cause environmental damage.
Section 14: Transportation Information
This product is only to be shipped within the MG Chemicals Conductive Keypad Repair Kit, part number
8339
Ground:
Consumer commodity / ORM-D
Air:
Shipper must be trained and certified. Refer to IATA Dangerous Goods Regulations. Ship as 鈥淒angerous goods in
excepted quantities鈥?, Class 3, PG II
Sea:
Refer to IMDG regulations. Shipping name: Limited quantity (paint), UN 1263, Class 3, PG II, Flash point 鈥?9掳C,
Storage category 鈥淎鈥?.
Section 15: Regulatory Information
This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.
SARA (Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
None of the chemicals in this product have a reportable quantity.
EPCRA (Emergency Planning and Right to Know Act, USA, 40 CFR 372.45
This product does not contain any chemicals subject to the reporting requirements of section 313 Title III of the
SARA of 1986 and 40 CFR part 372.
TSCA (Toxic Substances Control Act of 1976, USA)
All substances are TSCA listed.
CAA (Clean Air Act, USA)
This product does not contain any class 1-ozone depletors.
This product does not contain any class 2-ozone depletors.
This product does not contain any chemicals listed as hazardous air pollutants.
California Proposition 65 (Chemicals know to cause cancer or reproductive toxicity, May 1, 1997 revision, USA)
This product does not contain any chemicals listed.
Health Canada
Labeling and containers used in this product are listed in compliance with Consumer Chemicals and Container
regulations.
Environment Canada
Chemicals in this product are listed on the Domestic Substances List in the Canadian Environmental Protection Act
This product does not contain any ozone depleting substances.
PAGE 3 / 4 MSDS Code: 8339B
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Industry and Science Canada
Labeling, product identity, net quantity declaration, minimum printing type size heights, and packaging of this
product is in compliance with the Consumer Packaging and Labeling Act and Regulations. This product is not slack
filled in accordance to chapter 4 prohibitions.
RoHS (The restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2004).
This product is RoHS compliant.
Section 16: Other Information
Definitions: N/a = not applicable, n/e = not established
Disclaimer: This material safety data sheet is provided as an information resource only. M.G. Chemicals believes the
information contained herein is accurate and compiled from reliable sources. It is the responsibility of
the user to verify its validity. The buyer assumes all responsibility of using and handling the product in
accordance with federal, state, and local regulations.
PAGE 4 / 4 MSDS Code: 8339B
|