Registered Quality System ISO 9001
QMI Certificate # 004008
Burlington, Ontario, Canada
Material Safety Data Sheet
Revision Date Prepared by Technical Information
July 2, 2008 Patti Rogers 1-800-201-8822 or support@mgchemicals.com
Head Office Emergency
9347 - 193 Street, Surrey, B.C., V4N 4E7 Phone Canutech (613) 996-6666 Collect 24 hrs
For updates please download from www.mgchemicals.com or fax requests to 1-800-708-9888
Section 1: Product Identification
MSDS Code: 832HT - Part A Name: High Temperature Epoxy Potting and
Encapsulating Compound
Related Part Numbers: 832HT-375ML; 832HT-3L
Use: Encapsulating and potting compound for high temperature applications.
Section 2: Hazardous Ingredients
CAS# Chemical Name Percentage by weight ACGIH TWA Osha Pel Osha Stel
28064-14-4 Phenol Novolac Type Epoxy Resin 87-92% N/E N/E N/E
28064-14-4 Epoxy Resin Type Bis-F 5-10% N/E N/E N/E
Section 3: Hazards Identification
NFPA Ratings: Health 1 Flammability 0 Reactivity 0
HMIS Ratings: Health 1 Flammability 0 Physical Hazard 0
Eyes: Causes eye irritation. Avoid eye contact.
Skin: Causes skin irritation. Avoid skin contact.
Inhalation: At room temperature, exposure to vapors is unlikely due to physical properties. Higher temperatures
may generate vapor levels sufficient to cause irritation.
Ingestion: Single dose oral toxicity is low. Amounts ingested incidental to industrial handling are not likely to
cause injury; however, ingestion of large amounts may cause injury.
Chronic: No information available.
Section 4: First Aid Measure
Eyes: Remove contact lenses. Flush with plenty of water. Get medical aid if symptoms persist.
Skin: Wash skin with soap and water. Get medical aid if symptoms persist.
Inhalation: Immediately remove from exposure to fresh air. Get medical aid if symptoms persist.
Ingestion: Do not induce vomiting. If conscious, give 1-2 glasses of water. Get medical aid.
Section 5: Fire Fighting Measures
Autoignition Temperature: N/A Flash Point: 150掳C/302掳F LEL / UEL: N/A
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
General Information: N/A
PAGE 1 / 4 MSDS Code: 832HT 鈥? Part A
Registered Quality System ISO 9001
QMI Certificate # 004008
Burlington, Ontario, Canada
Section 6: Accidental Release Measures
Spill Procedure: Provide adequate ventilation. Wear appropriate personal protection. Sprinkle absorbent
compound onto spill, then sweep into a plastic or metal container. Wipe up further residue with
paper towel and place in container. Wash spill area with soap and water.
Section 7: Handling and Storage
Handling: Wash thoroughly after handling. Avoid contact with eyes, skin, and clothing. Do not ingest or inhale.
Do not expose container to heat.
Storage: Store in a cool, dry, well-ventilated area, away from incompatible substances.
Section 8: Exposure Controls
Routes of entry: Eyes, ingestion, inhalation, and skin.
Ventilation: Use adequate general or local exhaust ventilation to keep airborne concentrations below
exposure limits.
Personal Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective
Protection: clothing to prevent skin contact. Wear chemical resistant gloves such as butyl rubber, nitrite, or
neoprene. Use a NIOSH approved respirator when necessary.
Section 9: Physical and Chemical Properties
Physical Liquid Odor: Mild Solubility Insoluble Evaporation N/E
State: in water: Rate:
Boiling >150潞C Specific 1.39 Vapor <1 mm Hg @ Vapor N/A pH: N/A
Point: /302掳F Gravity: Pressure: 20掳C Density:
Section 10: Stability and Reactivity
Stability: Stable at normal temperatures and pressures.
Conditions to avoid: Excessive temperatures.
Incompatibilities: Strong Acids, Amines, strong bases, and strong oxidizing agents.
Polymerization: May occur.
Decomposition: Carbon dioxide, and carbon monoxide, phenol compounds.
PAGE 2 / 4 MSDS Code: 832HT 鈥? Part A
Registered Quality System ISO 9001
QMI Certificate # 004008
Burlington, Ontario, Canada
Section 11: Toxicological Information
Sensitization: (effects of repeated exposure) This product is a skin sensitizer.
Carcinogenicity: (risk of cancer) No
Teratogenicity: (risk of malformation in an No
unborn fetus)
Reproductive Toxicity: (risk of sterility) No
Mutangenicity: (risk of heritable genetic
No
effects)
Lethal Exposure Ingestion Inhalation Skin Inhalation
Concentrations: (LD50): (LC50): (LD50): (TCLo):
4000 mg/kg 6000 mg/kg N/E N/E
Phenol Novolac Type Epoxy
Rabbit Rabbit
Resin
N/E N/E N/E N/E
Epoxy Resin Type Bis-F
Section 12: Ecological Information
General Information:
Volatile Organic compounds, % by weight: 0
Volatile Organic compounds, grams per litre: 0
Section 13: Disposal Information
General Information: Dispose of in accordance with all local, provincial, state, and federal regulations. Water
runoff can cause environmental damage.
Section 14: Transportation Information
Ground:
Non-regulated
Air:
Non-regulated
Sea:
Non-regulated
Section 15: Regulatory Information
CANADA
This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.
DSL
All ingredients in this product are listed on the Domestic Substances List
WHMIS
This product belongs to the following categories: D2B
Industry and Science Canada
MG Labels products intended for the workplace to conform to WHMIS labeling regulations. Product identification,
net quantity declaration, minimum printing type size heights, and packaging of this product are in compliance.
Section 15: Regulatory Information Cont.
CANADA
CAA (Clean Air Act, USA)
This product does not contain any class 1 ozone depleting substances.
PAGE 3 / 4 MSDS Code: 832HT 鈥? Part A
Registered Quality System ISO 9001
QMI Certificate # 004008
Burlington, Ontario, Canada
This product does not contain any class 2 ozone depleting substances.
This product does not contain any chemicals listed as hazardous air pollutants.
Health Canada
Products produced by MG Chemicals intended for retail display conform to the Canadian Consumer Labeling
Regulations.
USA
SARA (Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
None of the chemicals in this product have a reportable quantity.
EPCRA (Emergency Planning and Right to Know Act, USA, 40 CFR 372.45
This product does not contain any chemicals subject to the reporting requirements of section 313 Title III of the
SARA of 1986 and 40 CFR part 372.
TSCA (Toxic Substances Control Act of 1976, USA)
All substances are TSCA listed.
California Proposition 65 (Chemicals know to cause cancer or reproductive toxicity, May 1, 1997 revision, USA)
This product does not contain any chemicals listed.
EUROPE
RoHS
This product does not contain any lead, cadmium, mercury, hexavalent chromium, PBB鈥檚, or PBDE鈥檚, and complies
with European RoHS regulations.
WEEE
This product is not a piece of electrical or electronics equipment, and is therefore not governed by this regulation.
Section 16: Other Information
Definitions: N/A = not applicable, N/E = not established
Disclaimer: This material safety data sheet is provided as an information resource only. M.G. Chemicals believes the
information contained herein is accurate and compiled from reliable sources. It is the responsibility of
the user to verify its validity. The buyer assumes all responsibility of using and handling the product in
accordance with federal, state, and local regulations.
PAGE 4 / 4 MSDS Code: 832HT 鈥? Part A
|