Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Material Safety Data Sheet
Revision Date Prepared by Technical Information
January 1, 2008 Patti Rogers 1-800-201-8822 or support@mgchemicals.com
Head Office Emergency
9347 - 193 Street, Surrey, B.C., V4N 4E7 Phone Canutech (613) 996-6666 Collect 24 hrs
For updates please download from www.mgchemicals.com or fax requests to 1-800-708-9888
Section 1: Product Identification
MSDS Code: 8331 - Part B Name: Epoxy - Electrically Conductive Adhesive
Related Part Numbers: 8331-14G; 8331-454G
Use: Electrically conductive adhesive.
Section 2: Hazardous Ingredients
Percentage by ACGIH
CAS# Chemical Name Osha Pel Osha Stel
weight TWA
140-31-8 1-(2-aminoethyl)-piperazine 2-5 N/e N/e N/e
84852-15-3 Nonyl phenol 20-30 N/e N/e N/e
9046-10-0 Poly [oxy (methyl-1, 2-ethanediyl)] 3-8 N/e N/e N/e
Reaction product with diglycidyl ether of
68411-71-2 1.0 N/e N/e N/e
bisphenol A
80-05-7 4,4 isopropylidenediphenol 0.1-1.0 N/e N/e N/e
111-40-0 Diethylenetriamine 1.0 1ppm N/e N/e
3 3
7440-22-4 Silver 40 - 70 0.1 mg/m 0.01 mg/m N/e
Section 3: Hazards Identification
WHMIS Codes: D2A, D2B, E
NFPA Ratings: Health 3 Flammability 1 Reactivity 1
HMIS Ratings: Health 3 Flammability 1 Reactivity 1
Eyes: Direct contact will cause severe burns and may cause permanent damage, including blindness.
Skin: Contact may cause skin irritation. May cause an allergic reaction of the skin.
Inhalation: Harmful if inhaled. May cause severe irritation to the respiratory tract.
Ingestion: Harmful if swallowed. Moderately toxic. Swallowing may burn mouth, throat and stomach.
Chronic: Repeated skin contact may cause dermatitis. Inhalation or ingestion of silver compounds may cause
argyria (permanent blue-gray discoloration of the eyes, skin, mucous membranes, and internal
organs). At high concentrations inhalation of fumes may cause metal fume fever and may cause
central nervous system depression. Material is harmful and may cause chemical pneumonia and lung
damage or fatal if liquid is aspirated into the lungs
Section 4: First Aid Measure
Eyes: Remove contact lenses (if worn) and flush eyes with large quantities of clean water for at least 20
minutes. Get immediate medical attention.
Skin: Thoroughly wash skin with soap. Remove contaminated clothing and wash before reuse. Solvents
should not be used
to clean hands or skin because they increase the penetration of the material into the skin. Get
medical aid if symptoms persist.
PAGE 1 / 4 MSDS Code: 8331 鈥? Part B
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Inhalation: Remove from exposure area to fresh air immediately. If not breathing give artificial respiration. If
breathing is difficult give oxygen by trained personnel. Get immediate medical attention if symptoms
persist.
Ingestion: Do not induce vomiting. If conscious rinse mouth and give 1-2 glasses of water. Get medical
attention.
Section 5: Fire Fighting Measures
Auto ignition N/e Flash >93掳C LEL / N/e
Temperature: Point: UEL:
Extinguishing
Use carbon dioxide, foam, and dry chemical or water fog.
Media:
General Hazardous combustion may produce carbon monoxide, carbon dioxide, irritating or toxic vapors and
Information: gases, oxides of nitrogen and ammonia.
Section 6: Accidental Release Measures
Spill Remove all sources of ignition. Provide adequate ventilation. Wear appropriate personal protection.
Procedure: Wipe up with paper towel and place in container. Wash spill area with soap and water.
Section 7: Handling and Storage
Handling: Wash hands thoroughly after handling. Avoid contact with eyes, skin, and clothing. Remove contaminated
clothing and wash before reuse. Do not ingest or inhale. Do not expose full or empty container to heat or
flame.
Storage: Keep away from sources of ignition. Store less than 26掳C (80掳F) in a dry, well-ventilated area, away from
incompatible substances.
Section 8: Exposure Controls
Routes of Eyes, ingestion, inhalation, and skin.
entry:
Ventilation: Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure
limits.
Personal Wear appropriate protective eyeglasses or chemical safety goggles. (Wear appropriate protective
Protection: clothing to prevent skin contact such as, at least, latex gloves). Use a NIOSH approved respirator
when necessary.
Section 9: Physical and Chemical Properties
Physical Liquid Odor: Amine Solubility: None Evaporation N/e
State: Rate:
Boiling N/e Specific 2.20 Vapor N/e Vapor Density: >1 pH: N/a
Point: Gravity: Pressure: (Air=1)
Section 10: Stability and Reactivity
Stability: Stable at normal temperatures and pressures.
Conditions to Contamination by those materials referred to under Incompatibility. Avoid temperatures
avoid: above 26掳C (80掳F).
Incompatibilities: Strong oxidizers, bases, acids, peroxides, chlorates and permanganates.
Polymerization: Hazardous polymerization will not occur.
Decomposition: Carbon dioxide, carbon monoxide, hydrocarbons, ammonia, and oxides of nitrogen
PAGE 2 / 4 MSDS Code: 8331 鈥? Part B
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Section 11: Toxicological Information
Sensitization: (effects of repeated
This product is a skin sensitizer.
exposure)
This material does not contain 0.1% or more of any chemical listed by
Carcinogenicity: (risk of cancer)
IARC, NTP or OSHA as a carcinogen.
Teratogenicity: (risk of malformation in No
an unborn fetus)
Reproductive Toxicity: (risk of sterility) No
Mutangenicity: (risk of heritable genetic
No
effects)
Lethal Exposure Ingestion N/e Inhalation N/e Skin N/e
Concentrations: (LD50): (LC50): (LD50):
Section 12: Ecological Information
General Avoid runoff into storms and sewers, which lead into waterways. Water runoff can cause
Information: environmental damage.
Environmental Impact Data: (percentage by weight)
CFC: 0 HFC: 0 Cl.Solv: 0 VOC: 0 HCFC: 0 ODP: 0
Section 13: Disposal Information
General Dispose of in accordance with all local, provincial, state, and federal regulations. Water runoff
Information: can cause environmental damage.
Section 14: Transportation Information
Ground:
Non regulated
Air:
Non regulated
Sea:
Non regulated
Section 15: Regulatory Information
This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.
SARA (Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
4,4'-isopropylidenediphenol CAS# 80-05-7 0.1-1.0% and Silver CAS#7440-22-4 40 鈥? 70% is listed under section
313 as toxic Material.
EPCRA (Emergency Planning and Right to Know Act, USA, 40 CFR 372.45
This product contains 4,4'-isopropylidenediphenol CAS# 80-05-7 0.1-1.0% and Silver CAS#7440-22-4 40 鈥? 70%
chemicals subject to the reporting requirements of section 313 Title III of the SARA of 1986 and 40 CFR part 372.
TSCA (Toxic Substances Control Act of 1976, USA)
All substances are TSCA listed.
CAA (Clean Air Act, USA)
This product does not contain any class 1-ozone depletors.
This product does not contain any class 2-ozone depletors.
PAGE 3 / 4 MSDS Code: 8331 鈥? Part B
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
This product does not contain any chemicals listed as hazardous air pollutants.
California Proposition 65 (Chemicals know to cause cancer or reproductive toxicity, May 1, 1997 revision, USA)
This product does not contain any chemicals listed.
Health Canada
Labeling and containers used in this product are listed in compliance with Consumer Chemicals and Container
regulations.
Environment Canada
Chemicals in this product are listed on the Domestic Substances List in the Canadian Environmental Protection Act
This product does not contain any ozone depleting substances.
Industry and Science Canada
Labeling, product identity, net quantity declaration, minimum printing type size heights, and packaging of this
product is in compliance with the Consumer Packaging and Labeling Act and Regulations. This product is not slack
filled in accordance to chapter 4 prohibitions.
RoHS (The restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2004).
This product is RoHS compliant.
Section 16: Other Information
Definitions: N/a = not applicable, n/e = not established
Disclaimer: This material safety data sheet is provided as an information resource only. M.G. Chemicals believes the
information contained herein is accurate and compiled from reliable sources. It is the responsibility of
the user to verify its validity. The buyer assumes all responsibility of using and handling the product in
accordance with federal, state, and local regulations.
PAGE 4 / 4 MSDS Code: 8331 鈥? Part B
|