Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Material Safety Data Sheet
Revision Date Prepared by Technical Information
January 8, 2008 Patti Rogers 1-800-201-8822 or support@mgchemicals.com
Head Office Emergency
9347 - 193 Street, Surrey, B.C., V4N 4E7 Phone Canutech (613) 996-6666 Collect 24 hrs
For updates please download from www.mgchemicals.com or fax requests to 1-800-708-9888
Section 1: Product Identification
MSDS Code: 832B - Part B Name: Encapsulating Epoxy Kit
Related Part Numbers: 832B-375ML; 832B-3L; 832B-60L; 8320
Use: Encapsulating and potting compound.
Section 2: Hazardous Ingredients
CAS# Chemical Name Percentage by weight ACGIH TWA Osha Pel Osha Stel
68082-29-1 polyamide 90 - 98 n/e n/e n/e
112-24-3 aliphatic amine 2 - 10 n/e n/e n/e
Section 3: Hazards Identification
WHMIS Codes: D2B
NFPA Ratings: Health 1 Flammability 0 Reactivity 0
HMIS Ratings: Health 1 Flammability 0 Reactivity 0
Eyes: Causes severe eye irritation. May cause visual impairment.
Skin: May cause skin irritation.
Inhalation: May cause irritation of the upper respiratory tract.
Ingestion: Relatively harmless. May cause gastrointestinal irritation, ulceration and or burns in the mouth and
throat.
Chronic: No information available.
Section 4: First Aid Measure
Eyes: Remove contact lenses. Flush with water or saline for 20 minutes. Get medical aid if symptoms
persist.
Skin: Wash skin with large quantities of soap and water. Get medical aid if symptoms persist.
Inhalation: Immediately remove from exposure to fresh air. Get medical aid if symptoms persist.
Ingestion: Do not induce vomiting. If conscious, give 1-2 glasses of water. Get medical aid.
Section 5: Fire Fighting Measures
Autoignition Temperature: n/e Flash Point: 190掳C LEL / UEL: n/e
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
General Information: n/a
PAGE 1 / 4 MSDS Code: 832B - Part B
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Section 6: Accidental Release Measures
Spill Remove all sources of ignition. Provide adequate ventilation. Wear appropriate personal protection.
Procedure: Sprinkle absorbent compound onto spill, then sweep into a plastic or metal container. Wipe up further
residue with paper towel and place in container. Wash spill area with soap and water.
Section 7: Handling and Storage
Handling: Wash thoroughly after handling. Avoid contact with eyes, skin, and clothing. Do not ingest or inhale. Do
not expose container to heat or flame.
Storage: Keep away from sources of ignition. Store in a cool, dry, well ventilated area, away from incompatible
substances.
Section 8: Exposure Controls
Routes of Eyes, ingestion, inhalation, and skin.
entry:
Ventilation: Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure
limits.
Personal Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective
Protection: clothing to prevent skin contact. Use a NIOSH approved respirator when necessary.
Section 9: Physical and Chemical Properties
Physical liquid Odor: ammonia Solubility: moderate Evaporation n/e
State: Rate:
Boiling n/e Specific 0.96 Vapor n/e Vapor Density: n/e pH: n/a
Point: Gravity: Pressure:
Section 10: Stability and Reactivity
Stability: Stable at normal temperatures and pressures.
Conditions to avoid: n/a
Incompatibilities: Excessive heat.
Polymerization: Will not occur.
Decomposition: Unkown
Section 11: Toxicological Information
Sensitization: (effects of repeated exposure) This product is a skin sensitizer.
Carcinogenicity: (risk of cancer) No
Teratogenicity: (risk of malformation in an unborn No
fetus)
Reproductive Toxicity: (risk of sterility) No
Mutangenicity: (risk of heritable genetic effects) No
Lethal Exposure Ingestion 16 g/kg Inhalation n/e Skin 6.5g/kg
Concentrations: (LD50): (rats) (LC50): (LD50): (rabbit)
PAGE 2 / 4 MSDS Code: 832B - Part B
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Section 12: Ecological Information
General Avoid runoff into storms and sewers which lead into waterways. Water runoff can cause
Information: environmental damage.
Environmental Impact Data: (percentage by weight)
CFC: 0 HFC: 0 Cl.Solv.: 0 VOC: 0 HCFC: 0 ODP: 0
Section 13: Disposal Information
General Dispose of in accordance with all local, provincial, state, and federal regulations. Water runoff
Information: can cause environmental damage.
Section 14: Transportation Information
Ground:
Non-regulated
Air:
Non-regulated
Sea:
Non-regulated
Section 15: Regulatory Information
This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.
This product is RoHS compliant.
SARA (Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
None of the chemicals in this product have a reportable quantity.
EPCRA (Emergency Planning and Right to Know Act, USA, 40 CFR 372.45
This product does not contain any chemicals subject to the reporting requirements of section 313 Title III of the
SARA of 1986 and 40 CFR part 372.
TSCA (Toxic Substances Control Act of 1976, USA)
All substances are TSCA listed.
CAA (Clean Air Act, USA)
This product does not contain any class 1 ozone depletors.
This product does not contain any class 2 ozone depletors.
This product does not contain any chemicals listed as hazardous air pollutants.
California Proposition 65 (Chemicals know to cause cancer or reproductive toxicity, May 1, 1997 revision, USA)
This product does not contain any chemicals listed.
Health Canada
Labeling and containers used in this product are listed in compliance with Consumer Chemicals and Container
regulations.
Environment Canada
Chemicals in this product are listed on the Domestic Substances List in the Canadian Environmental Protection Act
This product does not contain any ozone depleting substances.
Industry and Science Canada
Labeling, product identity, net quantity declaration, minimum printing type size heights, and packaging of this
product is in compliance with the Consumer Packaging and Labeling Act and Regulations. This product is not slack
filled in accordance to chapter 4 prohibitions.
PAGE 3 / 4 MSDS Code: 832B - Part B
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
RoHS (The restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2004).
This product is RoHS compliant.
Section 16: Other Information
Definitions: n/a = not applicable, n/e = not established
Disclaimer: This material safety data sheet is provided as an information resource only. M.G. Chemicals believes the
information contained herein is accurate and compiled from reliable sources. It is the responsibility of
the user to verify its validity. The buyer assumes all responsibility of using and handling the product in
accordance with federal, state, and local regulations.
PAGE 4 / 4 MSDS Code: 832B - Part B
|