Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Material Safety Data Sheet
Revision Date Prepared by Technical Information
January 2, 2008 Patti Rogers 1-800-201-8822 or support@mgchemicals.com
Head Office Emergency
9347 - 193 Street, Surrey, B.C., V4N 4E7 Phone Canutech (613) 996-6666 Collect 24 hrs
For updates please download from www.mgchemicals.com or fax requests to 1-800-708-9888
Section 1: Product Identification
MSDS Code: 4910 Name: Tip Tinner
Related Part Numbers: 4910-28G
Use: Tinning solder tips
Section 2: Hazardous Ingredients
CAS# Chemical Name Percentage by weight ACGIH TWA Osha Pel Osha Stel
0.2 mg/m3 0.20 mg/m3
7440-50-8 Copper < 1.0 N/e
1mg/m3 1mg/m3
7440-22-4 Silver 2-3 N/e
3 3
7440-31-5 Tin 92-96 2.00 mg/m 2.00 mg/m N/e
Section 3: Hazards Identification
WHMIS Codes: n/a
NFPA Ratings: Health 1 Flammability 0 Reactivity 0
HMIS Ratings: Health 1 Flammability 0 Reactivity 0
Eyes: Fumes may cause eye irritation.
Skin: Fumes may cause skin irritation.
Inhalation: Inhalation of the fumes from this or other soldering products may cause headache, nausea, and
muscular pain.
Ingestion: Ingestion of the fumes from this or other soldering products may cause headache, nausea, and
muscular pain.
Chronic: Prolonged or repeated exposure due to ingestion may cause anemia, insomnia, weakness,
constipation and abdominal pain.
Section 4: First Aid Measure
Eyes: MOLTEN PRODUCT: Cool burns with plenty of low-pressure water. Get immediate medical attention.
SOLID PRODUCT: Remove any contact lenses. Immediately flush eyes with large quantities of water
for at least 15 minutes. Get medical attention if irritation develops.
Skin: MOLTEN PRODUCT: Immediately cool skin burns with water and cold packs for at least 15 minutes.
Do not put ice directly on the skin. Do not attempt to remove solidified product from the skin, as
damage may result. Get immediate medical attention. SOLID PRODUCT: Immediately wash skin with
soap and copious amounts of water. Use lotion to prevent dryness. Get medical attention if irritation
develops.
Inhalation: If symptoms of overexposure are experienced, evacuate to fresh air. If symptoms persist, seek
medical attention.
Ingestion: If person is conscious, immediately give 2 glasses of water. Do not induce vomiting. Get immediate
medical attention.
PAGE 1 / 4 MSDS Code: 4910
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Section 5: Fire Fighting Measures
Autoignition Temperature: N/a Flash Point: N/a LEL / UEL: N/e
Extinguishing Media: Alcohol foam, carbon dioxide, or dry chemical
General Information: Closed containers may explode when exposed to fire conditions.
Section 6: Accidental Release Measures
Spill Procedure: If the material is in its solid state, pick up and reuse. When molten, allow to solidify, and the reuse
if it is not contaminated. If contaminated, refer to section 13 for disposal information.
Section 7: Handling and Storage
Handling: Wash thoroughly after handling. Avoid contact with eyes, skin, and clothing. Do not ingest or inhale. Do
not expose container to heat or flame.
Storage: Keep away from sources of ignition. Store in a cool, dry, well-ventilated area, away from incompatible
substances.
Section 8: Exposure Controls
Routes of Eyes, ingestion, inhalation, and skin.
entry:
Ventilation: Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure
limits.
Personal Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective
Protection: clothing to prevent skin contact. Use a NIOSH approved respirator when necessary.
Section 9: Physical and Chemical Properties
Physical Solid Odor: None Solubility: Partially Evaporation N/e
State: Rate:
Boiling Specific 5.9- Vapor 1mmHg Vapor Density: N/e pH: N/a
1380掳C
Point: Gravity: 7.0 Pressure: @860掳C
Section 10: Stability and Reactivity
Stability: Stable under ordinary use and storage conditions.
Incompatibilities: Strong acids and strong oxidizers should be avoided
Polymerization: Will not occur under normal use and storage conditions.
Decomposition: May emit fumes of carbon monoxide and carbon dioxide.
Section 11: Toxicological Information
Sensitization: (effects of repeated exposure) No
Carcinogenicity: (risk of cancer) No
Teratogenicity: (risk of malformation in an unborn fetus) No
Reproductive Toxicity: (risk of sterility) No
Mutangenicity: (risk of inheritable genetic effects) No
Lethal Exposure Ingestion N/e Inhalation N/e Skin N/e
Concentrations: (LD50): (LC50): (LD50):
PAGE 2 / 4 MSDS Code: 4910
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
Section 12: Ecological Information
General Information: No information on ecological toxicity or biodegradability is available at this time.
Environmental Impact Data: (percentage by weight)
CFC: 0 HFC: 0 Cl.Solv: 0 VOC: 0 HCFC: 0 ODP: 0
Section 13: Disposal Information
General Dispose of this material, contaminated absorbent material and other contaminated materials in an
Information: approved waste disposal facility, according to all applicable Federal, Sate / Provincial, and Local
regulations. Recovery and reuse, rather than disposal, should be the ultimate goal in handling
efforts.
Section 14: Transportation Information
Ground:
Non-regulated
Air:
Non-regulated
Sea:
Non-regulated
Section 15: Regulatory Information
This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.
SARA (Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
This product contains, Copper (< 1.0%) CAS# 7440-50-8, Silver (2 鈥? 3%) CAS #7440-22-4 toxic chemicals
subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization
Act of 1986 and 40 CFR part 372.
TSCA (Toxic Substances Control Act of 1976, USA)
This product contains, Copper (< 1.0%) CAS# 7440-50-8, Silver (2 鈥? 3%) CAS #7440-22-4 toxic chemicals
subject to the reporting requirements.
CAA (Clean Air Act, USA)
This product does not contain any class 1-ozone depletors.
This product does not contain any class 2-ozone depletors.
This product does not contain any chemicals listed as hazardous air pollutants.
California Proposition 65 (Chemicals know to cause cancer or reproductive toxicity, May 1, 1997 revision, USA)
N/A
Health Canada
Labeling and containers used in this product are listed in compliance with Consumer Chemicals and Container
regulations.
Environment Canada
Chemicals in this product are listed on the Domestic Substances List in the Canadian Environmental Protection Act
This product does not contain any ozone depleting substances.
Industry and Science Canada
Labeling, product identity, net quantity declaration, minimum printing type size heights, and packaging of this
product is in compliance with the Consumer Packaging and Labeling Act and Regulations. This product is not slack
filled in accordance to chapter 4 prohibitions.
PAGE 3 / 4 MSDS Code: 4910
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada
RoHS (The restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2004).
This product is RoHS compliant.
Section 16: Other Information
Definitions: N/a = not applicable, n/e = not established
Disclaimer: This material safety data sheet is provided as an information resource only. M.G. Chemicals believes the
information contained herein is accurate and compiled from reliable sources. It is the responsibility of
the user to verify its validity. The buyer assumes all responsibility of using and handling the product in
accordance with federal, state, and local regulations.
PAGE 4 / 4 MSDS Code: 4910
|