MSDS: QuakeBond鈩? J200TC-A PAGE 1 OF 3 PAGES
REV. DATE: 10/01/99 Revision: 4 QuakeWrap, Inc.
MATERIAL SAFETY DATA SHEET (MSDS)
Section 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
QuakeBond鈩? J200TC Tack Coat Resin (Part 鈥淎鈥?)
PRODUCT NAME:
CHEMICAL FAMILY: Epoxy Resin Mixture
SUPPLIER鈥橲 NAME: QuakeWrap, Inc., P.O. Box 64757, Tucson, AZ 85728
EMERGENCY PHONE: 800/535-5053 (Infotrac) GENERAL INFORMATION: (866) QuakeWrap [782-5397]
Section 2: COMPOSITION, INFORMATION ON INGREDIENTS
INGREDIENT % CAS # EXPOSURE LIMITS
Bisphenol A/Epoxy Reaction Products 60-100 25085-99-8 N/E
Silicates 15-25 112945-52-5 N/E
Glycidyl Ether 3-7 2461-15-6 NE
Epichlorohydrin <1ppm 106-89-8 5ppm skin OSHA PEL
Lamp Black 1-5 1333-86-4 N/E
Petroleum Distillates 0.2-1.5 64742-47-8 N/E *
(* 300ppm 鈥? supplier recommended
TWA)
Section 3: HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW: Epoxy resin solution. Certain individuals may have pre-existing skin or
respiratory conditions causing a sensitivity or allergy which manifests as various reactions. Heating or
spraying this product or the mixed parts increases potential health hazards. Health and Safety personnel
should examine handling procedures and remedy existing and potential health and safety hazards.
POTENTIAL HEALTH EFFECTS:
EYE:
鈥? May cause irritation.
SKIN:
鈥? May cause irritation. Low dermal absorption hazard.
INGESTION:
鈥? May inflame or damage the G.I. tract. Large quantities may be harmful.
INHALATION:
鈥? May cause irritation.
CHRONIC EFFECTS:
鈥? Repeated exposure may cause irritation and sensitization.
SIGNS & SYMPTOMS:
鈥? Skin rash, irritation, reddening, or eczema; breathing irritation or difficulty.
Section 4: FIRST AID MEASURES
鈾SE APPROPRIATE BLOOD-BORNE PATHOGENS PROTECTIONS鈾?
EYE:
鈥? Hold eyelids apart and flood with copious amounts of water. Seek medical attention.
SKIN:
鈥? Remove excess product. Wash thoroughly with soap and water. If irritation persists, seek
medical attention.
INGESTION:
ATTENTION: No representation is made as to the accuracy or correctness of the information contained herein, other
than to state that it is presented by this organization in good faith and we believe it to be correct and accurate per the
limits of our understanding and training as of the date of first publication. The user or handler of this product is warned
to take the most conservative and safest interpretation possible of all information contained herein and to use the
most extreme personal protection measures and exposure limitations prudently dictated by the specific usage or
handling situation, this MSDS information and good industrial safety and hygiene practices.
MSDS: QuakeBond鈩? J200TC-A PAGE 2 OF 3 PAGES
REV. DATE: 10/01/99 Revision: 4 QuakeWrap, Inc.
鈥? Do not induce vomiting unless directed by medical personnel. Seek medical attention.
INHALATION:
鈥? Remove to fresh air. Seek medical assistance.
Section 5: FIRE FIGHTING MEASURES
FLASH POINT: 177掳C, 350掳F UEL: N/A LEL: N/A VAPOR DENSITY: N/A
NFPA FLAMMABILITY RATING: 1 AUTOIGNITION: N/A
COMBUSTION PRODUCTS: CO, CO2, NOx, & misc. hydrocarbons
SPECIAL HAZARDS: Pre-sensitization to epoxy.
EXTINGUISHING MEDIA: Use foam, CO2, dry chemical, water fog.
FIRE FIGHTER INSTRUCTIONS: Stay upwind. Wear at least full bunker gear and SCBA.
Section 6: ACCIDENTAL RELEASE MEASURES
Isolate spill area. Keep out of sewers and storm drains. Stop the leak and contain the spill. Vacuum,
scoop, or absorb spill with non-combustible materials. Clean up spill residue with soap and water.
Section 7: HANDLING AND STORAGE
Avoid skin and eye contact and breathing vapors by appropriate measures. Do not eat or smoke while
handling this product. Wash thoroughly with mild soap and water after product handling or exposure.
Store in original sealed container at ambient temperatures (50掳-90掳F) in dry, well-ventilated areas.
Section 8: EXPOSURE CONTROLS, PERSONAL PROTECTION
For Personal Exposure Limits (PEL), Threshold Limit Values (TLV) or other exposure limits, see Sec. 2.
GENERAL: Provide ventilation that will keep airborne concentration at a minimum.
EYE/FACE: Safety glasses or splash goggles with face shield.
SKIN: Butyl or nitrile rubber chemical gloves. Don chemical resistant clothing where exposure may
occur.
RESPIRATORY: NIOSH approved respirator with organic vapor/HEPA filter cartridges.
OTHER: Decontaminate or discard clothing and materials that have come in contact with this product.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE: black paste ODOR: slightly sweet PHYSICAL STATE: liquid
VAPOR PRESS: N.D.A. SPECIFIC GRAVITY: 1.2 pH: N.D.A.
BOILING PT: N.D.A. MELT PT: N/A SOLUBILITY IN H2O: slightly
Section 10: STABILITY AND REACTIVITY
CHEMICAL STABILITY: Stable.
INCOMPATIBILITY: Strong acids, caustics, oxidizers, and epoxy hardeners in an uncontrolled condition.
HAZARDOUS POLYMERIZATION: Will not occur.
HAZARDOUS DECOMPOSITION: None known, other than Sec. 5鈥檚 Combustion Products.
Section 11: TOXICOLOGICAL INFORMATION
ATTENTION: No representation is made as to the accuracy or correctness of the information contained herein, other
than to state that it is presented by this organization in good faith and we believe it to be correct and accurate per the
limits of our understanding and training as of the date of first publication. The user or handler of this product is warned
to take the most conservative and safest interpretation possible of all information contained herein and to use the
most extreme personal protection measures and exposure limitations prudently dictated by the specific usage or
handling situation, this MSDS information and good industrial safety and hygiene practices.
MSDS: QuakeBond鈩? J200TC-A PAGE 3 OF 3 PAGES
REV. DATE: 10/01/99 Revision: 4 QuakeWrap, Inc.
Oral: N.D.A.
Dermal: N.D.A.
Inhalation: N.D.A.
Carcinogens under OSHA, ACGIH, NTP, IARC, or Other: None 鈮?0.1%.
Section 12: ECOLOGICAL INFORMATION
N.D.A.
Section 13: DISPOSAL CONSIDERATIONS
Dispose of in accordance with applicable federal, state, and local laws and regulations.
Section 14: TRANSPORT INFORMATION
DOT: Not Regulated.
IATA: Not Regulated.
IMO: Not Regulated.
Section 15: U.S. REGULATORY INFORMATION
OSHA: 29 CFR 1910.1200 Hazardous Chemical 鈥淚rritant鈥?, 鈥淪ensitizer鈥?.
TSCA: Contains listed ingredients CAS 2461-15-6.
CERCLA: Not Listed.
SARA III: Sec311 & 312 Immediate Health Hazard; Sec313 None.
CA PROP. 65 NOTICE: WARNING: This product contains a material known to the State of California to
cause cancer. (Epichlorohydrin <1ppm)
VOLATILE MATTER: 3.7% Part 鈥淎鈥?, Parts 鈥淎鈥? & 鈥淏鈥? mixed 0.0% EPA METHOD 24.
NFPA: Health 1 Fire 1 Reactivity 0 Other N/A
Section 16: CANADIAN REGULATORY INFORMATION
WHMIS: Hazard Classification: Class D2B Skin Sensitizer. Refer to MSDS for specific warnings.
WHMIS Symbols: Stylized T.
WHMIS Trade Secret Registry Numbers: None.
Hazardous Products Act Information: This product MSDS contains ingredients which are Controlled
and/or on the Ingredient Disclosure List (HPA sections 13 and 14).
ABBREVIATIONS: N/A = not applicable; N.D.A. = no data available; NE = not established
END OF MSDS
ATTENTION: No representation is made as to the accuracy or correctness of the information contained herein, other
than to state that it is presented by this organization in good faith and we believe it to be correct and accurate per the
limits of our understanding and training as of the date of first publication. The user or handler of this product is warned
to take the most conservative and safest interpretation possible of all information contained herein and to use the
most extreme personal protection measures and exposure limitations prudently dictated by the specific usage or
handling situation, this MSDS information and good industrial safety and hygiene practices.
|