UNITED 307
MATERIAL SAFETY DATA SHEET
320 37th Avenue, St. Charles, Illinois 60174 鈥? 214 Dolomite Drive, Downsview, Ontario M3J2N2 To Reorder Call:
www.unitedlabsinc.com 800-323-2594
1. PRODUCT AND COMPANY IDENTIFICATION FOR MEDICAL AND TRANSPORTATION EMERGENCIES
800-535-5053
24 Hour INFOTRAC (US and CANADA):
PRODUCT NAME USE/DESCRIPTION REVISION DATE
UNITED 307 SUPER SAFETY SOLVENT Safety Solvent January 31, 2008
3 0
HEALTH (0 = Maximum Safety) REACTIVITY (0 = Maximum Safety)
Always follow Label Directions and Cautions.
Susceptible to Release of Energy.
Always follow Label Directions and Cautions.
Always follow Label Directions and Cautions.
4 May detonate-vacate area if 2 Violent chemical change
4 Extreme 3 High 2 Moderate 1 Slight 0 Minimal
4 materials are exposed to fire. possible-use hose stream
3 Strong shock of heat may from distance
See Hazards Identification Section of this MSDS
detonate-use monitors from 1 Unstable if heated-use
for more detailed information.
behind explosion resistant precaution.
barriers. 0 Normally stable.
1
FLAMMABILITY (0 = Maximum Safety)
Susceptibility of Material to Burning.
PERSONAL PROTECTION: B
4 Extremely flammable. 1 Must be preheated
3 Ignites at normal temperature. to burn.
2 Ignites when moderately heated. 0 Will not burn.
2. COMPOSITION/INFORMATION ON INGREDIENTS
ACGIH OSHA LD50 LC50
Hazardous Ingredients CAS# %Range (TLV-TWA) (PEL-TWA) (Species/Route) (Species)
50 ppm 100 ppm 5650 mg/kg 12000 ppm/
Trichloroethylene 79-01-6 60-100
269mg/m3 (Rat/oral) 4 hr (Rat)
3. HAZARDS IDENTIFICATION
Eyes: Vapors may cause severe irritation with redness and pain. Splashes may cause eye damage.
Skin: Can cause irritation, redness and pain. Can cause blistering. Prolonged contact may cause defatting of skin and dermatitis.
Inhalation: Vapors can irritate the respiratory tract. Exposure to high concentrations of vapor or mist can cause CNS depression with
symptoms of visual disturbances and mental confusion, incoordination, headache, nausea, euphoria, and dizziness. Inhalation of high
concentrations could cause unconsciousness, heart effects, liver effects, kidney effects, and death.
Ingestion: Causes irritation to gastrointestinal tract. May also cause effects similar to inhalation. May cause coughing, abdominal pain,
diarrhea, dizziness, pulmonary edema, unconsciousness. Kidney failure can result in severe cases.
4. FIRST AID MEASURES
Eyes: Immediately flush with plenty of water for at least 15 minutes while holding eyelids open. Call a physician or poison center
immediately.
Skin: Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. If
irritation persists, call a physician or poison center.
Inhalation: Remove to fresh air. If breathing is difficult, administer oxygen . If breathing has stopped, administer CPR. Call a
physician or poison center immediately.
If Swallowed: DO NOT induce vomiting. Call a physician or poison center immediately. Never give anything by mouth to an
unconscious person.
5. FIRE FIGHTING MEASURES
Flash Point (TCC): None Explosive Limits: Lower (LEL): 8.0% Upper (UEL): 12.5
Flame Projection (Aerosol): N/A
Hazardous Products of Combustion: When strongly heated, as in a fire, this product may produce carbon dioxide and carbon
monoxide and oxides of nitrogen.
Fire and Explosion Hazards: Product may thermally decompose to produce hydrogen chloride vapors and possibly traces of
phosgene. Concentrated vapors can be ignited by high intensity heat source (a welding torch).
Extinguishing Media: Use water spray to keep fire exposed containers cool. If substance does ignite, use CO2, dry chemical or foam.
Fire Fighting Instructions: Firefighters should wear full protective equipment and NIOSH approved self-contained breathing
apparatus with full face piece operated in the pressure demand or other positive pressure mode. Structural firefighters' clothing provides
only limited protection to the combustion products of this material.
-1-
6. ACCIDENTAL RELEASE MEASURES
Small Spills: Ventilate area of leak or spill. Remove all sources of ignition. Wear appropriate personal protective equipment as
specified in Section 8. Contain and recover liquid when possible. Use non-sparking tools and equipment. Absorb with an inert
material(e.g., vermiculite, dry sand, earth) and place in a chemical waste container.
Large Spills: Ventilate area of leak or spill. Remove all sources of ignition. Evacuate area unnecessary and unprotected personnel
from entering. For larger quantities, dike spill and collect with an inert material (e.g., vermiculite, dry sand, earth) and place in a chemical
waste container. Do not flush to sewer. US Regulations (CERLA) require reporting spills and releases to soil, water and air in excess of
reportable quantities.
7. HANDLING AND STORAGE
Keep in a properly labeled, tightly closed container. Store in a cool, dry, well ventilated area away from direct sunlight and sources of
ignition. Isolate from incompatible substances. Containers of this material may be hazardous when empty since they retain product
residues (vapors, liquid); observe all warning and precautions listed for the product. Wash hands and face with soap and water after
using this product. Remove contaminated clothing immediately; wash thoroughly with soap and water before reusing.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Eyes: Chemical safety goggles recommended, and/or a full face shield where splashing is possible.
Skin: Chemical resistant gloves or Neoprene gloves recommended.
Respiratory: None required if good ventilation is maintained. If TLV is exceeded, use a NIOSH/MSHA approved respirator.
Engineering Controls: Provide adequate ventilation and local exhaust is recommended to keep employee exposures below the
Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its
source, preventing dispersion of it into the general work area.
Other Protective Clothing or Equipment: Shirts with long sleeves, rubber boots for cleaning up spills.
9. PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point: 188掳F/87掳C Specific Gravity: 1.46 (H2O=1) Vapor Pressure: 57.8@ 20掳C/68掳F Melting Point: -73掳C/-99掳F
Vapor Density: 4.5 Evaporation Rate: NA Solubility in Water: Negligible pH: NA
Appearance and Odor: Clear colorless liquid with ethereal odor.
10. STABILITY AND REACTIVITY
Hazardous Polymerization: Will not occur.
Hazardous Decomposition: In a fire, hydrogen chloride, phosgene, chlorine, may be produced.
Chemical Stability: Stable
Incompatibility: Do not mix with strong alkalies or oxidizing materials Keep away from open flames, electric arc or hot surface.
11. TOXICOLOGICAL INFORMATION
Carcinogenicity (NTP/IARC/OSHA): IARC group 2A probably carcinogenic
California Proposition 65: Does this product contain chemical(s) known to the State of California to cause cancer and/or to cause birth
defects or other reproductive harm? Yes Trichloroethylene CAS# 79-01-6
12. ECOLOGICAL INFORMATION
ND
13. DISPOSAL CONSIDERATIONS
Consult your local, state, provincial, and federal regulations for proper disposal guidelines. Disposal regulations may be different for each
state and/or locality.
14. TRANSPORT INFORMATION
DOT: Available upon request
TDG: Available upon request
UN: Availabale upon request
15. REGULATORY INFORMATION
VOC(Volatile Organic Compounds): 100%
TSCA (Toxic Substances Control Act): Listed
SARA Title III Section 302 EHS: ND
SARA Title III Section 311/312: ND
SARA Title III Section 313 Toxic Chemicals: Trichloroethylene CAS# 79-01-6
WHMIS Classification:
This product has been classified in accordance with the hazard criteria of the CPR (Controlled Products Regulations/ WHMIS) and the
MSDS contains all the information required by the CPR.
16. OTHER INFORMATION
Read and follow all label directions and precautions before using this product. These products are intended for industrial and institutional
use only. NOT FOR HOUSEHOLD USE OR RESALE. KEEP OUT OF REACH OF CHILDREN.
UNITED 307 SUPER SAFETY SOLVENT PREPARED BY: Sandy Kopacz
-2-
|