Material Safety Data Sheet
according to 91/155/EEC
Product name : Lascaux Acrylic Adhesive 498 HV (4005)
Revision : 31.08.2004 Version : 1.0.0
Print date : 10.01.2005
01. Identification of substance, preparation and company
Product name:
Lascaux Acrylic Adhesive 498 HV (4005)
Manufacturer/Supplier
Lascaux Colours & Restauro
Barbara Diethelm AG
Street/P.O.Box
Z眉richstrasse 42
Country code/Postal code/Town/City
8306 Br眉ttisellen
Telephone / Telefax
+41 1 807 41 41 / +41 1 807 41 40
Emergency information
+41 1 251 51 51 (Tox Center) ++1 800 468 6942 (for U.S.A.)
02. Composition/information on ingredients
Chemical characterization
Dispersion of a thermoplastic acrylic polymer based on methyl methacrylate and n-butyl
acrylate.
Hazardous components
AMMONIA SOLUTION ; CAS-No. : 1336-21-6
Percentage : 1-5%
Classification : N ; R 50 C ; R 34
03. Hazards identification
Hazard designation
Not a hazardous substance or preparation according to EC-directives 67/548/EEC or 99/45/EC.
04. First-aid measures
General
In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything
by mouth to an unconscious person.
After inhalation
Take the casualty into the fresh air and keep warm. Keep at rest. Irregular breathing/no
breathing: artificial respiration. Unconsciousness: lateral position - call a physician.
After skin contact
Wash away with soap and water and rinse. Do NOT use solvents or thinners.
After eye contact
Remove contact lenses, keep eyelids open. Flush with plenty of water (10 - 15 min.). Call a
physician.
After ingestion
Contact a doctor immediately. Keep at rest. Do not induce vomiting.
05. Fire-fighting measures
Suitable extinguishing media
Alcohol resistant foam, CO2, powders, water spray.
Unsuitable extinguishing media
Page : 1 / 4
Material Safety Data Sheet
according to 91/155/EEC
Product name : Lascaux Acrylic Adhesive 498 HV (4005)
Revision : 31.08.2004 Version : 1.0.0
Print date : 10.01.2005
Waterjet.
Special risk posed by the substance or by the actual preparation, its combustion
products or gases discharged
Fire will produce dense black smoke. Exposure to decomposition products may cause a health
hazard.
Special protective equipment
Appropriate breathing apparatus may be required.
Additional information
Do not allow the quenching water into the sewage system.
06. Accidental release measures
Personal precautions
Refer to protective measures listed in sections 7 and 8.
Environmental precautions
Do not empty into drains. If the product contaminates lakes, rivers or sewages, inform
appropriate authorities in accordance with local regulations.
Methods for cleaning up/collecting
Contain and collect spillage with non-combustible absorbent materials, e.g. sand, earth,
vermiculite, diatomaceous earth and place in container for disposal according to local
regulations (see section 13). Clean preferabily with a detergent; avoid use of solvents.
07. Handling and storage
Information for safe handling
Do not eat or drink during work - no smoking. Comply with the health and safety at work laws.
For personal protection see Section 8.
Requirements to be met by storerooms and containers
No particular measures required.
Information about separation of incompatible products
Keep away from oxidizing agents, from strongly alkaline and strongly acid materials.
Further information about storage conditions
Always keep in containers of same material as the original one. See also instructions on the
label. Avoid heating and direct sunlight. Keep containers dry and cool. Comply with the health
and saftey at work laws.
Storage class (VCI) : 12
08. Exposure controls and personal protection
Components with critical values that require monitoring at the workplace (exposure
limits)
AMMONIA SOLUTION ; CAS-No. : 1336-21-6
Specification : TRGS 900 - maximum limit in the atmosphere at the workplace ( D )
50 ppm / 35 mg/m3
Value :
Category : =1=
Remarks : Y
Version date : 01.09.2001
Personal protective equipment
Respiratory protection
If workplace limits are exceeded, a gas mask approved for this purpose must be worn.
Page : 2 / 4
Material Safety Data Sheet
according to 91/155/EEC
Product name : Lascaux Acrylic Adhesive 498 HV (4005)
Revision : 31.08.2004 Version : 1.0.0
Print date : 10.01.2005
Eye protection
Use safety glasses.
Body protection
After skin contact wash thorougly with soap and water or use recognised skin cleanser. Do Not
use solvents or thinners.
09. Physical and chemical properties
Image
Form : Pasty.
Colour : White.
Odour : Characteristic.
Relevant safety data
Boiling point / range : ( 1013 hPa ) not applicable
Flash point : not applicable
Vapour pressure : ( 50 掳C ) ca. 120 hPa
g/cm3
Density : ( 20 掳C ) ca. 1
pH value : ca. 8.5
Viscosity : ( 20 掳C ) ca. 7000 mPa.s
10. Stability and reactivity
Conditions to avoid
Stable under recommended storage and handling conditions(See section 7).
Hazardous decomposition products
When exposed to high temperatures may produce hazardous decomposition products such as
carbon monoxide and dioxide, smoke, oxides of nitrogen.
11. Toxicological information
Additional toxicological information
There no data availble on the preparation itself. The preparation has been assessed following
the conventional method of the Dangerous Preparations Directive 1999/45/EC and classified for
toxicological hazards accordingly. See Sections 2 and 15 for details.
12. Ecological information
Additional ecological information
General ecological information
There are no data available on the product itself. Do not empty into waters or drains.
13. Disposal considerations
Contaminated packaging must be emptied of all residues and, following appropriate cleaning,
may be sent to a recycling plant. Uncleaned packaging must be disposed of in the same manner
as the medium.
14. Transport information
Land transport ADR/RID and GGVS/GGVE (2000)
Classification
Class : -
Land transport ADR/RID (2001)
Page : 3 / 4
Material Safety Data Sheet
according to 91/155/EEC
Product name : Lascaux Acrylic Adhesive 498 HV (4005)
Revision : 31.08.2004 Version : 1.0.0
Print date : 10.01.2005
Classification
Class : -
Maritime transport IMDG/GGVSea
Classification
IMDG-Code : -
Air transport ICAO-TI and IATA-DGR
Classification
Class : -
15. Regulatory information
Classification according to EEC directives
Special designation for certain preparations
101 Safety data sheet available for professional user on request.
National regulatory information
Ordinance for average cases (St枚rfallV)
Dangerous ingredients according to St枚rfallV
AMMONIA SOLUTION ; CAS-No. : 1336-21-6
Regulation on inflammable liquids (VbF)
VbF-Class : Not dangerous according to VbF
Emission control act ("TA-Luft")
Sum organic substances class III : < 5 %
Water pollution classification
Class : 1 according VwVwS
Poisonous law (CH)
Class : Giftklassefrei
BAGT-number : 93397
International regulatory information
U.S.A. Conforms to ASTM D-4236. 鈥淣o health labeling required鈥?
16. Other information
Further information
The details in this material safety data sheet satisfy national and EU legislation. We have no
knowledge or control over the user麓s working conditions however. The product may not be
used for any purpose other than that specified in chapter 1 unless written consent has been
obtained. The user is responsible for the observance of all required statutory provisions.
R-Phrases of components
34 Causes burns
50 Very toxic to aquatic organisms
These data are based on our present knowledge. However, they shall not constitute a guarantee for
any specific product features and shall not establish a legally valid contractual relationship.
Page : 4 / 4
|