Christoph Waller Long Life for Art,
Im B眉ckle 4, D- 79288 Gottenheim, Tel: +49 (0)7665 94
03 9-0, Fax: -1
ART SORB Material Safety Data Sheet
Effective Date: February 20, 2002
Producer:
Fuji Silysia Chemical LTD
5th Fl. Higashi-kan, Dai-niToyota Building,
4-11-27 Meieki, Nakamura-ku, Nagoya, Aichi, Japan
Tel: +81 52 583 0451, Fax: +81 52 583 0455
1) Product Identification:
Synonyme: Silica, Amorphous; Silicic Acid; Amorphous Silicon Dioxide, Lithium
Chloride
2) Composition/Information on Ingredients
CAS No
Ingredient:
Silica, Amorphous SiO2 7631.86.9
Lithium Chloride: LiCl 7447.41.8
3) Hazards Identification:
Affects respiratory system, causes irritation to eyes
Emergency Overview:
Potential Health Effects
May cause dryness and irritations to mucous m
membrane, nose and thoat. Symptoms may include
Inhalation:
coughing, sore throat, dyspnea, wheezing, and non-
specific chest illnesses
Ingestion No adverse effects expected
Skin Contact May cause irritation with dryness and abrasion
Eye Contact Causes irritation, redness and pain
Repeated exposure may cause symptoms similar to the
Chronic Exposure
effects on the above
Aggravation of Pre-existing
No information found
Conditions
4) First Aid Measures:
Remove to fresh air. Get medical attention for any
Inhalation
breathing difficulty.
Give several glasses of water to dilute, If large amounts
Ingestion
were swallowed, get medical advice.
Wash exposed area with soap and water. Get medical
Skin Contact
advice if irritation develops
Immediately flush eyes with plenty of water for at least
Eye Contact 15 minutes, lifting lower and upper eyelids occasionally.
Get medical attention immediately
5) Fire Fighting Measures:
Fire Not considered to be a fire hazard
Explosion Not considered to be an explosion hazard
Use any means suitable for extinguishing surrounding
Fire Extinguishing Media
fire
Use protective clothing and breathing equipment
Special Information
appropriate for the surrounding fire
6) Accidental Release Measures:
If its use requires manual handling, wear long sleeves and close-weave cotton gloves with
tight-fitting wristlets.
If dusty conditions prevail, collects in an empty container with no dispersion, and wipe
off, suck up under the place without a wind. Watch your step.
7) Handling and Storage:
Keep in a tightly closed container, stored in a cool, dry ventilated area. Protect against
physical damage. Take precautions a static electric spark. Isolate from incompatible
substances. Containers or this material may be hazardous when empty since they retain
product residues(dust, solids); observe all warnings and precautions listed for this
product.
8) Exposure Controls/Personal Protection
Airborne Exposure Limits:
Amorphous Silica:
OSHA Silica gel - PEL - 6mg/m3
ACGIH Threshold Limit Value (TLV): 10 mg/m3; TWA: inhalable particulate: 3
mg/m3 (TWA) respirable particulate
Lithium Chloride:
No OSHA vacated PELs are listed for this chemical
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures
below the Aitborne exposure Limits. Local exhaust ventilation is generally preferred
because it can control the emissions of the contaminant at its source, preventing
dispersion of it into the general work area. Please refer to the ACGIH document,
Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for
details
Personal Respriators:
If its use requires manual handling, wear log sleeves and close-weave cotton gloves with
tight-fitting wristlets. If dusty conditions prevail, use of an approved NIOSH / MSHA
dust respirator is recommended. Wear googles if dust causes eye discomfort.
Skin Protection:
Wear protective gloves and clean body-covering clothing
Eye Protection:
Use chemical safety goggles and/or full face shield where dusting or splashing of
solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area
9) Physical and Chemical Properties
Appearance dry or humid, white bead
Odor Odorless
Solubility Silica gel: Insoluble; LiCl: soluble
Boiling Point 2230掳C as a Silica Gel
Melting Point 1610掳C as a Silica Gel
10) Stability and Reactivity
Stable under ordinary conditions of use and
Stability
storage
Hazardous Decomposition Products No information found
Hazardous Polymerization Will not occur
Hydrogen fluoride, fluorine, xenon
Incompatibilities hexafluoride, oxygen difluoride and
chlorine trifluoride
Heat, flame, ignition soources, dustng,
Conditions to Avoid
moisture and incompatibilities
11) Toxicological Information
Animal Toxicology: No information found
Cancer Lists:
Ingredient IARC Category
Silica, Amorphous (7631-86-9) 3
12) Ecological Information
Environmental Fate: No information found
Environment Toxicity: No information found
13) Disposal Consideration
Whatever cannot be saved for recovery of recycling should be managed in an appropriate
and approved waste disposal facility. Processing, use or contamination of this product
may change the waste managment options.State and local disposal regulations. Dispose
of container and unused contents in accordance with federal, state and local requirements.
14) Transport Information
Not regulated
15) Regulatory Information:
U.S: Federal Regulation TSCA 8 (b)inventory: SILICA GEL
Not controlled under WHMIS (Canada)
WHIMIS (Canada)
CEPA DSL: SILICA GEL
International Regulations
EINECS Silica Gel 231-545-4
R36/37/38. Irritating to eyes, respiratory
DSCL (EEC
system and skin
International Lists
Australia (NICNAS: Silica Gel
Japan: (MITI): Silica Gel
Korea(TCCL): Silica Gel
China: No products found
16) Other Information
Fuji Silysia Chemical provides the information contained herein in good faith but makes
no representation as to its comprehensivehness or accuracy. This document is intended
only as a guide to the appropriate precautionary handling of the material by a properly
trained person using this product. Individuals receiving the information must exercise
their independent judgment in determining its appropriateness for a particular purpose.
Fuji Silysia Chemical LTD makes no representations or warranties, either express or
implied, including without limitation any warranties of merchantability, fitness for a
particularpurpose with respect to the information set forth herein or the product to which
the information refers. Accordingly, Fuji Silysia Chemical LTD will not be responsible
for damages resulting from use of or reliance upon this information.
|