Issue Date: November 30, 2005
MATERIAL SAFETY DATA SHEET
PRODUCT NAME: (Item Number)
Aytex P Wheat Starch Item 114885
Section I - Identification
Manufacturers Name Emergency Telephone Number
ADM ARKADY 913-782-8800
Address Telephone Number for Information
100 Paniplus Roadway 913-782-8800
Olathe, Kansas 66061
Section II - Hazardous Ingredients / Identity Information
CAS No.:
Minimum explosive concentration is 0.025 oz./cu.ft.
Section III - Physical / Chemical Characteristics
Boiling Point Specific Gravity (H2O = 1)
N/A N/A
Vapor Pressure (mm Hg) Melting Point
N/A N/A
Bulk Density: Loose Solubility in water
Appearance Odor
Off white powder Bland
Section IV - Fire and Explosion Hazard Data
Flash Point (Method Used) Flammable Limits LEL UEL
N/A N/A
Extinguishing Media
Water fog, CO2, dry chemical
Special Fire Fighting Procedures
Self-contained breathing apparatus
Unusual Fire and Explosion Hazards
Avoid stirring up dust which may explode in the presence or an ignition source.
This MSDS is based upon a limited review of ADM files and standard Toxicological handbooks.
The information herein is furnished without warranty of any kind. This information should only be used as a supplement to information
already in your possession concerning the product. The determination of whether and under what conditions the product should be used
by your employees is yours to make.
Product Name (Item Number)
Page 2 of 2
Aytex P Wheat Starch Item 114885
Section V - Reactivity Data
Stability: Stable Unstable Conditions to Avoid:
X Heat and humidity
Incompatibility (Materials to Avoid)
Oxidizers, reducers, bases
Hazardous Decomposition鈥檚 or Byproducts
Combustion can produce CO, CO2, and O2.
Hazardous May Occur Will Not Occur Conditions to Avoid
polymerization: X
Section VI - Health Hazard Data
Routes of Entry: Inhalation Skin Ingestion
Inhalation and skin.
Health Hazards (Acute and Chronic)
None known.
Carcinogenicity NTP? IARC Monographs? OSHA Regulated?
No No No No
Signs and Symptoms of Exposure
Itchy, irritated skin.
Medical Conditions Generally Aggravated by Exposure
Allergies. Skin sensitivity
Emergency and First Aid Procedures
EYES: Flush with water. SKIN: Wash with soap and water.
Section VII - Precautions for Safe Handling and Use
Steps to Be Taken in Case Material is Released or Spilled
Eliminate ignition sources. Sweep or scoop into a clean trash container.
Waste Disposal Method
Dispose of in accordance with all federal, state and local regulations.
Precautions to Be Taken in Handling and Storing
Store in a cool, dry area.
Other Precautions
Keep container closed when not in use.
Section VIII - Control Measures
Respiratory Protection (Specify Type)
NIOSH - approved dust mask
Ventilation Local Exhaust Mechanical (General) Special Other
Preferred adequate
Protective Gloves Eye Protection
Not required unless skin is sensitive. Safety goggles. No contact lenses.
Other Protective Clothing or Equipment
Adequate venting and exhausting. Dust tight wiring and fixtures.
The information contained herein is correct as of the date of this document to the best of our knowledge. Any recommendations or suggestions are made without guarantee or
representation as to results and are subject to change without notice. We suggest you evaluate any recommendations and suggestions independently. We disclaim any and all warranties,
whether express or implied, and specifically disclaim the implied warranties of merchantability, fitness for a particular purpose and non-infringement. Our responsibility for claims arising from
any claim for breach of warranty, negligence or otherwise shall not include consequential, special or incidental damages, and is limited to the purchase price of material purchased from us.
None of the statements made here shall be construed as a grant, either express or implied, of any license under any patent held by ADM or other parties. Customers are responsible for
obtaining any licenses or other rights that may be necessary to make, use or sell products containing ADM ingredients.
|