Talas

                                         Your professional resource for the finest in

                                         conservation, preservation, and restoration

                                         supplies � since 1962.

           http://talasonline.com





             Water Based Incralac 96X0049 MSDS

Manufacturers Name:          Stan Chem Inc.

                             401 Berlin Street

                             East Berlin, CT 06023



Emergency Tel #:             Chemtrec      1-800-424-9300

Information Tel. #:          (860) 828-0571

Date of Preparation:         September 11, 2001



                                     Section I � Product Identification



Product Number:              96X0049

Product Name:                Clear Water Base

Product Class:               Acrylic Urethane



                                    Section II � Hazardous Ingredients



Occupational Exposure Limits

Ingredient          wt.    TVL (ppm) ACGIH TWA (ppm) OSHA STEL Ceiling (ppm) Vapor Press



Dipropylene Glycol           4.5 (max)                 100ppm                               0.50

Mono Methyl Ether

CAS #(34590-94-8)



1-Methyl 2-Pyrrolidone       3.0 (max)     100ppm       not est.                            0.29

CAS #(872-50-4)



Ethylene Glycol              1.3 (max)                  25ppm                       25ppm   0.66

Mono Butyl Ether

CAS #(111-76-2)



Tri Ethylene Amine           0.3(max)                   10ppm                       25ppm   54

CAS #(121-44-81)



                                          Section III � Physical Data



                             2120F � 3400F

Boiling Range:

Vapor Density:               Heavier than air

Evaporation Rate:            Slower than ether

% volatile volume:           70.5%

Weight per gallon:           8.6# / gallon

                                   Section IV � Fire & Explosion Hazard Data



Flammability Classification:

              OSHA             111B

              DOT              111B

                               Over 1600F

              Flash Point

              LEL              None



Extinguishing Media:           Foam, CO2, Dry Chemical, Water, Fog.



Unusual Fire & Explosion Hazards:            Container may burn and leak in heat of fire.



Special Firefighting Procedures:             Normal procedures may be used.



                                        Section V � Health Hazard Data



Effects of Overexposure: Skin: Prolonged or repeated contact with coating may cause irritation. Eyes: Direct

contact with product to eyes can cause irritation.



Medical Conditions Prone to Aggravation by Exposure:



Primary Route(s) of Entry: Dermal



Carcinogenicity:       NTP?                         N/A

                       LARC Monographs?             N/A

                       OSHA regulated?              N/A



Emergency & First Aid Procedures:

      Skin: Wash thoroughly with soap and water.

      Eyes: Immediately flush eyes with plenty of water for at least 15 minutes. Contact a physician.



                                         Section VI � Reacitivity Data



Stability:     Stable

Hazardous Polymerization: Will not occur

Hazardous Decomposition Products: When exposed to fire, produces normal products of combustion.

Conditions to Avoid: N/A

Incompatibility (materials to avoid): N/A



                                     Section VII � Spill or Leak Procedures



Steps to be Taken in Case Material is Released or Spilled: Eliminate all sources of ignition. Contains

ammonia. Do not let spilled or leaking material enter water source. May be toxic to aquatic life. Sweep with

oil-dri or similar inert material. Sweep or scrape up and containerize.



Waste Disposal Method: Dispose of in accordance with local, state, and federal regulations.

                             Section VIII � Safe Handling and Use information



Respiratory Protection:                 None required under normal use.

Ventilation:                            Local exhaust as required by job conditions.

Protective Gloves:                      Impervious material

Eye Protection:                         Goggles

Other Protective Equipment:             None

Hygienic Practices:                     Eye wash and shower should be available. Use under well ventilated

conditions. Personnel should wash thoroughly after handling product. Always wash-up before eating, smoking,

or using the toilet facilities. Do not breath vapor, do not contact eyes, skin, and clothing.



                                      Section IX � Special Precautions



Precautions to be Taken in Handling and Storage:

Other Precautions:

HHIS Ratings:         Health:1      Flammability: 2        Reactivity: 0









Disclaimer:

The information provided here is done so in good faith but makes no representation as to its comprehensiveness

or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material

by a properly trained person using this product. Individuals receiving the information must exercise their

independent judgment in determining its appropriateness for a particular purpose. NO REPRESENTATIONS

OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT

TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION

REFERS. ACCORDINGLY, WE WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM

USE OF OR RELIANCE UPON THIS INFORMATION.