Materials Safety Data Sheet



Preperation Date: Oct. 24, 2001



Section 1- Material Identification

Product Class:       Modified Dextrine

Manufacturers Code: 3 Paste Adh.

HMIS: Health 1       Flammability: 0          Reactivity: 0



Section 2 � Hazardous Ingredient

Ingredient                                    Cas No.         Percent        TVL

Preservative

Sodium 0-phenylphenate tetrahydrate           006152-33-6 <0.4%            Not determined



Ingredients not precisely identified are proprietary or nonhazardous.

Values are not product specifications.



Section 3 � Physical Data

                               100o C.

Boiling Point:

Vapor Density:                 Less than air

Evaporation Rate H2O=1:        1

Spec. Gravity (H2O=1):         >1

Melting point:                 N/A

Solubility in water:           Dispersable

Appearance and odor:           white paste/bland



Section 4 � Fire and Explosion Hazard Data

Flammability Classification:        N/A

Autoignition Temp.                  N/A

Unusual fire and explosion hazards: None Known

Extinguishing media:                water, carbon dioxide, dry chemical foam

Special fire fighting procedures:   None known



Section 5 � Reactivity Data

Stability:            Stable in most environments

Hazardous Polymerization: Will not occur. Separation may occur following freeze/thaw.



Section 6 � Spill or Leak Procedures

Steps to be taken in case material is related or spilled:

        If material is released or spilled, dam up to limit spreading. Mop up or absorb on

        inert material and place in containers. If spill occurs in enclosed area, ventilate.



Waste, Disposal Method:

       Dispose of in accordance with Local, State, and Federal; Regulations.

Section 7 � Health Hazard Data

Threshold limit value: Has not been established.

Effects of overexposure and first aid procedures:

        Eye contact: This material may irritate eyes. Flush with water for at least 15

        minutes. Contact physician if irritation persists.

        Skin: This material may irritate skin or cause a rash. Wash affected area with

        mild soap and water.

        Inhalation: Inhalation of vapors may cause irritation in the respiratory track..

        Remove to fresh air.

        Ingestion: No specific information identified.



Section 8 � Special Protection Information

Respiratory Protection:      N/A in ventilated area

Protective gloves:           Rubber Gloves

Eye Protection:              Splash-proof eye goggles

Other Protective wear:       Wear protective clothing to prevent skin contact.

Ventilation:                 General ventilation is recommended during normal use.



Section 9 � Special Precautions

Precautions to be taken in handling and storing:

Avoid breathing of vapors. Handle in well ventilated work space. Keep in cool, dry,

ventilated storage and in closed containers. Avoid freezing temperatures during storage.

Minimize contact with atmospheric air to prevent inoculation with microorganisms.



Section 10 � Additional Information

EPA SARA title III Hazardous Class:     None

OSHA HCS Hazard Class:                  (29CFR.910.1200) None

EPA SARA title Section 33 (40CFR372) toxic chemical present in quantities greater than

the “De Minimis� level are:             None



Disclaimer of Liability

The information in this MSDS was obtained from sources we believe are reliable.

However, the information is provided without any representation or warranty, expressed

or implied, regarding its accuracy or correctness.



The conditions or methods handling, storage, use and disposal of this product are beyond

our control and may be beyond our knowledge. For this and other reasons, we do not

assume responsibility and expressly disclaim liability for loss, damage, or expense arising

out of or in any way connected with the handling, storage, use or disposal of this product.