|-------------------------------------------------------|
| MATERIAL SAFETY DATA SHEET |
|-------------------------------------------------------|
|-------------------------------------------------------------------------|
| SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
|-------------------------------------------------------------------------|
PRODUCT NAME : EASY SOLUTIONS - Latex Spackling
UPC NUMBER : 7079812334, 7079812339
PRODUCT USE/CLASS : Latex Spackling
MANUFACTURER: 24 HOUR EMERGENCY:
DAP INC. TRANSPORTATION: 1-800-535-5053 (352-323-3500)
2400 BOSTON STREET MEDICAL : 1-800-327-3874 (513-636-5118)
BALTIMORE, MD 21224
PREPARE DATE : 10/16/2000 GENERAL INFORMATION:
REVISION NO. : 1 DAP INC. : 1-888-DAP-TIPS (1-888-327-8477)
REVISION DATE: 06/11/2001
|-------------------------------------------------------------------------|
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS |
|-------------------------------------------------------------------------|
WT/WT %
ITEM ------------ CHEMICAL NAME ------------- CAS NUMBER RANGE
---------------------------------------------------------------------------
01 Calcium Carbonate 1317-65-3 65.0-70.0 %
02 Crystalline silica 14808-60-7 0.1-1.0 %
03 Polygorskite (Attapulgite) 12174-11-7 1.0-5.0 %
---------------------- EXPOSURE LIMITS --------------------
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN
---------------------------------------------------------------------------
01 10 mg/m3 N.E. 15 mg/m3 N.E. N.E. NO
02 .05 mg/m3 N.E. 0.1 mg/m3 N.E. N.E. NO
03 N.E. N.E. (see below)* N.E. N.E. NO
(See Section 16 for abbreviation legend)
Remaining ingredients are not considered hazardous per the OSHA Hazard
Communication Standard.
Listed Permissible Exposure Levels (PEL) are from the U.S. Dept. of Labor
OSHA Final Rule Limits (CFR 29 1910.1000); limits may vary between states.
* OSHA PEL for Crystalline Silica (respirable): (10 mg/m3)/% Silica + 2
(Continued on Page 2)
--------------------------------------------------------------------------
Product Name: EASY SOLUTIONS - Latex Spackling
Revision Date: 06/11/2001 Page 2
|-------------------------------------------------------------------------|
| SECTION 3 - HAZARDS IDENTIFICATION |
|-------------------------------------------------------------------------|
EMERGENCY OVERVIEW: CAUTION! Removal of this product after use will result
in the generation of dust. If dry-sanded, exposure to dust may result in
build-up of material in eyes, ears, nose, and mouth which may cause
irritation.
POTENTIAL HEALTH EFFECTS:
EFFECTS OF OVEREXPOSURE - EYE CONTACT: May cause eye irritation.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: May dry skin.
EFFECTS OF OVEREXPOSURE - INHALATION: Vapor may irritate nose and upper
respiratory tract. The International Agency for Research on Cancer
(IARC)has determined that crystalline silica inhaled in the form of quartz
or crisobalite from occupational sources is carcinogenic to humans (Group 1
没 carcinogenic to humans). Refer to IARC Monograph 68, Silica, Some
Silicates and Organic Fibres (published in June 1997) in conjunction with
that use of these materials. The National Toxicology Program (NTP)
classifies respirable crystalline silica as 么known to be a human
carcinogen枚. Refer to the 9th Report on Carcinogens (2000). The American
Conference of Governmental Industrial Hygienists (ACGIH) classifies silica,
quartz, as suspect human carcinogen (A2). Other data with possible
relevance to human health: There is some evidence that breathing
respirable crystalline silica or the disease silicosis is associated with
an increased incidence of significant disease endpoints such as scleroderma
(an immune system disorder manifested by fibrosis of the lungs, skin and
other internal organs) and kidney disease.
EFFECTS OF OVEREXPOSURE - INGESTION: None known.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Inhalation of dust may
result in pulmonary and respiratory damage. Prolonged or repeated
inhalation of dust may cause lung damage. Polygorskite fibers are
considered a suspect human carcinogen by the IARC. Risk to one's health
depends on level and duration of exposure. Respirable crystalline silica
is considered a human carcinogen (Group 1) by (IARC).
MEDICAL CONDITIONS WHICH MAY BE AGGRAVATED BY CONTACT: Asthma and
asthma-like conditions may worsen from prolonged and repeated exposure.
PRIMARY ROUTE(S) OF ENTRY: SKIN CONTACT INHALATION
(Continued on Page 3)
--------------------------------------------------------------------------
Product Name: EASY SOLUTIONS - Latex Spackling
Revision Date: 06/11/2001 Page 3
|-------------------------------------------------------------------------|
| SECTION 4 - FIRST AID MEASURES |
|-------------------------------------------------------------------------|
EYE CONTACT: Flush with large quantities of water until irritation
subsides.
SKIN CONTACT: Wash with soap and water.
INHALATION: Remove to fresh air.
INGESTION: DO NOT INDUCE VOMITING.
COMMENTS: Call 1-800-327-3874 if irritation persists or complications
arise from any of the above exposure.
|-------------------------------------------------------------------------|
| SECTION 5 - FIRE FIGHTING MEASURES |
|-------------------------------------------------------------------------|
FLASH POINT: >200 F LOWER EXPLOSIVE LIMIT: N.A.
(SETAFLASH CLOSED CUP) UPPER EXPLOSIVE LIMIT: N.A.
|-------------------------------------------------------------------------|
| SECTION 5 - FIRE FIGHTING MEASURES |
|-------------------------------------------------------------------------|
AUTOIGNITION TEMPERATURE:
EXTINGUISHING MEDIA: CO2 DRY CHEMICAL FOAM
UNUSUAL FIRE AND EXPLOSION HAZARDS: None known.
SPECIAL FIREFIGHTING PROCEDURES: Use water spray to cool exposed surfaces.
|-------------------------------------------------------------------------|
| SECTION 6 - ACCIDENTAL RELEASE MEASURES |
|-------------------------------------------------------------------------|
SPILL OR LEAK PROCEDURES: Scrape up dried material and place into
containers.
|-------------------------------------------------------------------------|
| SECTION 7 - HANDLING AND STORAGE |
|-------------------------------------------------------------------------|
HANDLING INFORMATION: KEEP OUT OF REACH OF CHILDREN. Keep containers away
from excessive heating and freezing. Avoid skin and eye contact. Do not
inhale dusts of this product.
STORAGE INFORMATION: Store away from caustics and oxidizers. Keep
containers tightly closed when not in use. Keep containers from excessive
heat and freezing. Do not store at temperatures above 120 degrees F(49 C).
OTHER PRECAUTIONS: None.
(Continued on Page 4)
--------------------------------------------------------------------------
Product Name: EASY SOLUTIONS - Latex Spackling
Revision Date: 06/11/2001 Page 4
|-------------------------------------------------------------------------|
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
|-------------------------------------------------------------------------|
ENGINEERING CONTROLS: If dry-sanding, provide sufficient mechanical
ventilation to maintain exposure below PEL and TLV.
RESPIRATORY PROTECTION: If 8 hour exposure limit or value is exceeded for
any component, use an approved NIOSH/OSHA respirator. Consult your safety
equipment supplier and the OSHA regulation, 29 CFR 1910.134 for respirator
requirements. A respiratory protection program that meets OSHA 1910.134 and
ANSI Z88.2 requirements must be followed whenever workplace conditions
warrant a respirator's use. Use an approved NIOSH/OSHA respirator if dry
sanded.
EYE PROTECTION: Safety glasses with side shields recommended.
SKIN PROTECTION: Gloves recommended for repeated or prolonged contact with
skin.
OTHER PROTECTIVE EQUIPMENT: None.
HYGIENIC PRACTICES: Remove contaminated clothing and wash before reuse.
|-------------------------------------------------------------------------|
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES |
|-------------------------------------------------------------------------|
BOILING RANGE : 210-220 F (99没104 C) VAPOR DENSITY: Is lighter than air
ODOR : Mild Odor
APPEARANCE : Opaque paste EVAPORATION RATE: Is slower than Butyl
SOLUBILITY IN H2O : Soluble Acetate
SPECIFIC GRAVITY : 1.8690
VAPOR PRESSURE : 17.5 mm Hg @68F (20 C)
PHYSICAL STATE : Paste
(See Section 16 for abbreviation legend)
|-------------------------------------------------------------------------|
| SECTION 10 - STABILITY AND REACTIVITY |
|-------------------------------------------------------------------------|
CONDITIONS TO AVOID: Excessive heat and freezing.
INCOMPATIBILITY: Strong oxidizers and caustics.
HAZARDOUS DECOMPOSITION PRODUCTS: Normal decomposition products, i.e. COx,
NOx
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
(Continued on Page 5)
--------------------------------------------------------------------------
Product Name: EASY SOLUTIONS - Latex Spackling
Revision Date: 06/11/2001 Page 5
|-------------------------------------------------------------------------|
| SECTION 11 - TOXICOLOGICAL PROPERTIES |
|-------------------------------------------------------------------------|
No product or component toxicological information is available.
|-------------------------------------------------------------------------|
| SECTION 12 - ECOLOGICAL INFORMATION |
|-------------------------------------------------------------------------|
No Information.
|-------------------------------------------------------------------------|
| SECTION 13 - DISPOSAL CONSIDERATIONS |
|-------------------------------------------------------------------------|
WASTE MANAGEMENT/DISPOSAL: This product does not meet the definition of a
hazardous waste according to U.S. EPA Hazardous Waste Management
Regulations, 40 CFR Section 261. However, it is recommended that material
be incinerated at a permitted facility. State and Local regulations/
restrictions are complex and may differ from Federal regulations.
Responsibility for proper waste disposal is with the owner of the waste.
EPA WASTE CODE - If discarded (40 CFR 261): None.
|-------------------------------------------------------------------------|
| SECTION 14 - TRANSPORTATION INFORMATION |
|-------------------------------------------------------------------------|
DOT PROPER SHIPPING NAME: Not Regulated by D.O.T.
DOT HAZARD CLASS: NONE
DOT UN/NA NUMBER: NONE PACKING GROUP: NONE
Note: The shipping information provided is applicable for domestic ground
transport only. Different categorization may apply if shipped via other
modes of transportation and/or to non-domestic destinations.
|-------------------------------------------------------------------------|
| SECTION 15 - REGULATORY INFORMATION |
|-------------------------------------------------------------------------|
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
----------- CHEMICAL NAME ----------- CAS NUMBER WT/WT % RANGE
No SARA Section 313 components exist in this product.
(Continued on Page 6)
--------------------------------------------------------------------------
Product Name: EASY SOLUTIONS - Latex Spackling
Revision Date: 06/11/2001 Page 6
|-------------------------------------------------------------------------|
| SECTION 15 - REGULATORY INFORMATION |
|-------------------------------------------------------------------------|
TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12(B) if exported from the United States:
----------- CHEMICAL NAME ----------- CAS NUMBER
No information is available.
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:
----------- CHEMICAL NAME ----------- CAS NUMBER
Water 7732-18-5
Vinyl Acetate Polymer TSRN-618608-5057P
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at
greater than 3%:
----------- CHEMICAL NAME ----------- CAS NUMBER
Water 7732-18-5
Vinyl Acetate Polymer proprietary
CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are
known to the state of California to cause cancer:
----------- CHEMICAL NAME ----------- CAS NUMBER
Crystalline Silica 14808-60-7
Polygorskite 12174-11-7
INTERNATIONAL REGULATIONS: AS FOLLOWS -
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: Not regulated.
(Continued on Page 7)
--------------------------------------------------------------------------
Product Name: EASY SOLUTIONS - Latex Spackling
Revision Date: 06/11/2001 Page 7
|-------------------------------------------------------------------------|
| SECTION 16 - OTHER INFORMATION |
|-------------------------------------------------------------------------|
HMIS RATINGS - HEALTH: 1 FLAMMABILITY: 0 REACTIVITY: 0
PREVIOUS MSDS REVISION DATE: 10/16/2000
VOC less water, less exempt solvent: 30-40 g/L (0.2没0.3lbs/gal)(1-2 wt%VOC)
VOC material : 10-20 g/L
LEGEND: ACGIH - AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
N.A. - NOT APPLICABLE
N.E. - NOT ESTABLISHED
PEL - PERMISSIBLE EXPOSURE LIMIT
NTP - NATIONAL TOXICOLOGY PROGRAM
SARA - SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986
STEL - SHORT TERM EXPOSURE LIMIT
TLV - THRESHOLD LIMIT VALUE(8 HR. TIME WEIGHTED AVERAGE OR TWA)
VOC - VOLATILE ORGANIC COMPOUND
NJRTK - NEW JERSEY RIGHT TO KNOW LAW
N.D. - NOT DETERMINED
MSDS# 10421
---------------------------------------------------------------------------
This data is offered in good faith as typical values and not as a product
specification. No warranty either expressed or implied, is hereby made.
The recommended industrial hygiene and safe handling procedures are
believed to be generally applicable. However, each user should review the
recommendations in specific context of the intended use and determine if
they are appropriate.
---------------------------------------------------------------------------
< End OF MSDS >
|