|-------------------------------------------------------|
| MATERIAL SAFETY DATA SHEET |
|-------------------------------------------------------|
|-------------------------------------------------------------------------|
| SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
|-------------------------------------------------------------------------|
THIS MATERIAL SAFETY DATA SHEET IS AVAILABLE IN SPANISH UPON REQUEST.
LOS DATOS DE SEGURIDAD DEL PRODUCTO PUEDEN OBTENERSE EN ESPANOL SI LO
REQUIERE.
PRODUCT NAME : D-1001 MULTIPURPOSE CERAMIC ADHESIVE
UPC NUMBER: : 7079860654, 7079860656, 7079860658, 7079825190,
7079825192
: Adhesive
MANUFACTURER: 24 HOUR EMERGENCY:
DAP INC. TRANSPORTATION: 1-800-535-5053
2400 BOSTON ST. MEDICAL: 1-800-327-3874
BALTIMORE, MD 21224
PREPARE DATE: 02/02/99 GENERAL INFORMATION:
REVISION NO. : 7 DAP INC.: 1-800-543-3840
REVISION DATE: 07/17/99
|-------------------------------------------------------------------------|
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS |
|-------------------------------------------------------------------------|
WT/WT %
ITEM ------------ CHEMICAL NAME ------------- CAS NUMBER RANGE
---------------------------------------------------------------------------
01 Mineral spirits 8052-41-3 1.0-5.0 %
02 Ethylene glycol 107-21-1 1.0-5.0 %
---------------------- EXPOSURE LIMITS --------------------
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN
---------------------------------------------------------------------------
01 100 ppm N.E. 100 ppm N.E. N.E. NO
02 N.E. 50 ppm* N.E. 50 ppm N.E. NO
(See Section 16 for abbreviation legend), * - TLV-Ceiling Value
Remaining ingredients are not considered hazardous per the OSHA Hazard
Communication Standard.
Listed Permissible Exposure Levels (PEL) are from the U.S. Dept. of Labor
OSHA Final Rule Limits (CFR 29 1910.1000); limits may vary between states.
|-------------------------------------------------------------------------|
| SECTION 3 - HAZARDS IDENTIFICATION |
|-------------------------------------------------------------------------|
EMERGENCY OVERVIEW: CAUTION! Harmful or fatal if swallowed. May cause eye
or skin irritation.
POTENTIAL HEALTH EFFECTS:
(Continued on Page 2)
---------------------------------------------------------------------------
Product Name: D-1001 MULTIPURPOSE CERAMIC ADHESIVE
Revision Date: 07/17/99 Page 2
|-------------------------------------------------------------------------|
| SECTION 3 - HAZARDS IDENTIFICATION |
|-------------------------------------------------------------------------|
EFFECTS OF OVEREXPOSURE - EYE CONTACT: May cause eye irritation.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: Prolonged or repeated contact
with skin may cause irritation.
EFFECTS OF OVEREXPOSURE - INHALATION: Vapor may irritate nose and upper
respiratory tract. Vapor inhalation may affect the brain or nervous system
causing dizziness, headache or nausea. May irritate eyes, skin, nose and
respiratory tract.
EFFECTS OF OVEREXPOSURE - INGESTION: Ingestion of ethylene glycol in
excess may lead to respiratory cardiac failure as well as kidney and liver
damage.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Ingestion of Ethylene Glycol
in excess may lead to respiratory and cardiac failure, and kidney and liver
damage. Prolonged or repeated contact with skin may cause irritation.
MEDICAL CONDITIONS WHICH MAY BE AGGRAVATED BY CONTACT: None known.
PRIMARY ROUTE(S) OF ENTRY: SKIN CONTACT INGESTION
|-------------------------------------------------------------------------|
| SECTION 4 - FIRST AID MEASURES |
|-------------------------------------------------------------------------|
EYE CONTACT: Flush with large quantities of water until irritation subside
SKIN CONTACT: Wash with soap and water.
INHALATION: Remove to fresh air.
INGESTION: DO NOT INDUCE VOMITING. Contact a physician or Regional Poison
Control Center immediately.
COMMENTS: Call 1-800-327-3874 if irritation or complications arise from
any of the above exposures.
|-------------------------------------------------------------------------|
| SECTION 5 - FIRE FIGHTING MEASURES |
|-------------------------------------------------------------------------|
FLASH POINT:>200 F LOWER EXPLOSIVE LIMIT: N.A.
(SETAFLASH CLOSED CUP) UPPER EXPLOSIVE LIMIT: N.A.
EXTINGUISHING MEDIA: CO2 DRY CHEMICAL FOAM WATER FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS: None known.
(Continued on Page 3)
---------------------------------------------------------------------------
Product Name: D-1001 MULTIPURPOSE CERAMIC ADHESIVE
Revision Date: 07/17/99 Page 3
|-------------------------------------------------------------------------|
| SECTION 5 - FIRE FIGHTING MEASURES |
|-------------------------------------------------------------------------|
SPECIAL FIREFIGHTING PROCEDURES: As in any fire, wear self-contained
breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and
full protective gear. Use water spray to cool exposed surfaces.
|-------------------------------------------------------------------------|
| SECTION 6 - ACCIDENTAL RELEASE MEASURES |
|-------------------------------------------------------------------------|
SPILL OR LEAK PROCEDURES: Use absorbent material or scrape up dried
material and place into containers.
|-------------------------------------------------------------------------|
| SECTION 7 - HANDLING AND STORAGE |
|-------------------------------------------------------------------------|
HANDLING INFORMATION: KEEP OUT OF REACH OF CHILDREN. Avoid prolonged or
repeated contact with skin. Avoid contact with eyes.
STORAGE INFORMATION: Store away from caustics and oxidizers. Keep
containers tightly closed when not in use. Keep containers from excessive
heat and freezing. Do not store at temperatures above 120 degrees F.
OTHER PRECAUTIONS: Use in a well ventilated area. Provide fresh air such
that chemical odors cannot be detected during use and while drying.
Construction and repair activities can adversely affect indoor air quality.
Consult with the occupants or a representative(i.e. maintenance, building
manager, industrial hygienist, or safety officer) to determine ways to
minimize any impact.
|-------------------------------------------------------------------------|
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
|-------------------------------------------------------------------------|
ENGINEERING CONTROLS: Good mechanical ventilation and local exhaust.
RESPIRATORY PROTECTION: A respiratory protection program that meets OSHA
1910.134 and ANSI Z88.2 requirements must be followed whenever workplace
conditions warrant a respirator's use. Not required under normal usage and
adequate ventilation.
EYE PROTECTION: Safety glasses with side shields recommended.
SKIN PROTECTION: Gloves recommended for repeated or prolonged contact with
skin.
OTHER PROTECTIVE EQUIPMENT: None.
(Continued on Page 4)
---------------------------------------------------------------------------
Product Name: D-1001 MULTIPURPOSE CERAMIC ADHESIVE
Revision Date: 07/17/99 Page 4
|-------------------------------------------------------------------------|
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
|-------------------------------------------------------------------------|
HYGIENIC PRACTICES: Although this product is not considered an eye
irritant, inhalation hazard, or a skin contact hazard under normal
conditions, it is advisable that personnel minimize skin contact,
inhalation of vapors, and eye contact. Remove contaminated clothing and
wash before reuse.
|-------------------------------------------------------------------------|
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES |
|-------------------------------------------------------------------------|
BOILING RANGE : 210 - 220 F VAPOR DENSITY : Is heavier than air
ODOR : Sweet Odor
APPEARANCE : Off white color EVAPORATION RATE: Is slower than Butyl
SOLUBILITY IN H2O : N.E. Acetate
SPECIFIC GRAVITY : 1.5950
VAPOR PRESSURE : 17.5 mm Hg@68F.
PHYSICAL STATE : Paste VISCOSITY : 278,800-304,400
(See Section 16 for abbreviation legend)
|-------------------------------------------------------------------------|
| SECTION 10 - STABILITY AND REACTIVITY |
|-------------------------------------------------------------------------|
CONDITIONS TO AVOID: Excessive heat and freezing.
INCOMPATIBILITY: Strong oxidizers and caustics.
HAZARDOUS DECOMPOSITION PRODUCTS: Normal decomposition products, i.e. COx,
NOx
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
|-------------------------------------------------------------------------|
| SECTION 11 - TOXICOLOGICAL PROPERTIES |
|-------------------------------------------------------------------------|
No product or component toxicological information is available.
The toxicological properties of this material are unknown, however,
based on the toxicity of its constituents, it is expected to have
relatively low toxicity.
|-------------------------------------------------------------------------|
| SECTION 12 - ECOLOGICAL INFORMATION |
|-------------------------------------------------------------------------|
No Information.
(Continued on Page 5)
---------------------------------------------------------------------------
Product Name: D-1001 MULTIPURPOSE CERAMIC ADHESIVE
Revision Date: 07/17/99 Page 5
|-------------------------------------------------------------------------|
| SECTION 13 - DISPOSAL CONSIDERATIONS |
|-------------------------------------------------------------------------|
WASTE MANAGEMENT/DISPOSAL: Dispose of according to Federal, State, and
Local Standards. This product does not meet the definition of a hazardous
waste according to U.S. EPA Hazardous Waste Management Regulations, 40 CFR
Section 261. State and Local regulations/restrictions are complex and may
differ from Federal regulations. Responsibility for proper waste disposal
is with the owner of the waste.
EPA WASTE CODE - If discarded (40 CFR 261): None
|-------------------------------------------------------------------------|
| SECTION 14 - TRANSPORTATION INFORMATION |
|-------------------------------------------------------------------------|
DOT PROPER SHIPPING NAME: Not Regulated by D.O.T.
DOT HAZARD CLASS: NONE
DOT UN/NA NUMBER: NONE PACKING GROUP: NONE
Note: The shipping information provided is applicable for domestic ground
transport only. Different categorization may apply if shipped via other mo
of transportation and/or to non-domestic destinations.
|-------------------------------------------------------------------------|
| SECTION 15 - REGULATORY INFORMATION |
|-------------------------------------------------------------------------|
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
----------- CHEMICAL NAME ----------- CAS NUMBER WT/WT % RANGE
Ethylene glycol 107-21-1 1.0-5.0 %
TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12(B) if exported from the United States:
----------- CHEMICAL NAME ----------- CAS NUMBER
No information available.
All ingredients are listed on the TSCA inventory
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:
----------- CHEMICAL NAME ----------- CAS NUMBER
Water 7732-18-5
Proprietary acid polymer TSRN618608-5144P
(Continued on Page 6)
---------------------------------------------------------------------------
Product Name: D-1001 MULTIPURPOSE CERAMIC ADHESIVE
Revision Date: 07/17/99 Page 6
|-------------------------------------------------------------------------|
| SECTION 15 - REGULATORY INFORMATION |
|-------------------------------------------------------------------------|
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at
greater than 3%:
----------- CHEMICAL NAME ----------- CAS NUMBER
Water 7732-18-5
Proprietary acid polymer Proprietary
CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are
known to the state of California to cause cancer, birth defects or other
reproductive harm:
----------- CHEMICAL NAME ----------- CAS NUMBER
No proposition 65 chemicals are known to exist in this product.
INTERNATIONAL REGULATIONS: AS FOLLOWS -
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: No information available.
(Continued on Page 7)
---------------------------------------------------------------------------
Product Name: D-1001 MULTIPURPOSE CERAMIC ADHESIVE
Revision Date: 07/17/99 Page 7
|-------------------------------------------------------------------------|
| SECTION 16 - OTHER INFORMATION |
|-------------------------------------------------------------------------|
HMIS RATINGS - HEALTH: 2 FLAMMABILITY: 1 REACTIVITY: 0
PREVIOUS MSDS REVISION DATE: 02/01/97
REASON FOR REVISION: FORMULA CHANGE
MSDS 77050
VOC Material 80-90 g/l
VOC less water less exempt 80-90 g/l
LEGEND: ACGIH - AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
N.A. - NOT APPLICABLE
N.E. - NOT ESTABLISHED
PEL - PERMISSIBLE EXPOSURE LIMIT
NTP - NATIONAL TOXICOLOGY PROGRAM
SARA - SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986
STEL - SHORT TERM EXPOSURE LIMIT
TLV - THRESHOLD LIMIT VALUE(8 HR. TIME WEIGHTED AVERAGE OR TWA)
VOC - VOLATILE ORGANIC COMPOUND
NJRTK - NEW JERSEY RIGHT TO KNOW LAW
N.D. - NOT DETERMINED
---------------------------------------------------------------------------
This data is offered in good faith as typical values and not as a product
specification. No warranty either expressed or implied, is hereby made.
The recommended industrial hygiene and safe handling procedures are
believed to be generally applicable. However, each user should review the
recommendations in specific context of the intended use and determine if
they are appropriate.
---------------------------------------------------------------------------
< End OF MSDS >
|