|-------------------------------------------------------|
| MATERIAL SAFETY DATA SHEET |
|-------------------------------------------------------|
|-------------------------------------------------------------------------|
| SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
|-------------------------------------------------------------------------|
THIS MATERIAL SAFETY DATA SHEET IS AVAILABLE IN SPANISH UPON REQUEST.
LOS DATOS DE SEGURIDAD DEL PRODUCTO PUEDEN OBTENERSE EN ESPANOL SI LO
REQUIERE.
PRODUCT NAME : DAP Finishing Putty(All Colors)
UPC NUMBER : 21244, 21245, 21246, 21247, 21248, 21249, 21250,
21251, 21252, 21253, 21254, 21255, 21257, 21258,
21259, 21260, 21262, 21266, 21268, 21270, 21272,
21274, 21276
PRODUCT USE/CLASS : Finishing Putty
MANUFACTURER: 24 HOUR EMERGENCY:
DAP INC. TRANSPORTATION: 1-800-535-5053 (352-323-3500)
2400 BOSTON STREET MEDICAL : 1-800-327-3874 (513-558-5111)
BALTIMORE, MD 21224
PREPARE DATE: 02/05/1996 GENERAL INFORMATION:
REVISION NO.: 5 DAP INC. : 1-888-DAP-TIPS (1-888-327-8477)
REVISION DATE: 08/25/2000
|-------------------------------------------------------------------------|
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS |
|-------------------------------------------------------------------------|
WT/WT %
ITEM ------------ CHEMICAL NAME ------------- CAS NUMBER RANGE
---------------------------------------------------------------------------
This product is not considered to be or to contain hazardous chemicals
based on evaluations made by our company under OSHA Hazard Communication
Standard 29CFR 1910.1200
---------------------- EXPOSURE LIMITS --------------------
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN
---------------------------------------------------------------------------
(See Section 16 for abbreviation legend), * - TLV-Ceiling Value
Remaining ingredients are not considered hazardous per the OSHA Hazard
Communication Standard.
Listed Permissible Exposure Levels (PEL) are from the U.S. Dept. of Labor
OSHA Final Rule Limits (CFR 29 1910.1000); limits may vary between states.
(Continued on Page 2)
--------------------------------------------------------------------------
Product Name: DAP Finishing Putty(All Colors)
Revision Date: 08/25/2000 Page 2
|-------------------------------------------------------------------------|
| SECTION 3 - HAZARDS IDENTIFICATION |
|-------------------------------------------------------------------------|
EMERGENCY OVERVIEW: CAUTION! Removal of this product after use will result
in the generation of dust. If dry-sanded, exposure to dust may result in
build-up of material in eyes, ears, nose, and mouth which may cause
irritation.
POTENTIAL HEALTH EFFECTS:
EFFECTS OF OVEREXPOSURE - EYE CONTACT: May cause eye irritation.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: None known.
EFFECTS OF OVEREXPOSURE - INHALATION: If dry sanded, asthma and asthma
like conditions may exist.
EFFECTS OF OVEREXPOSURE - INGESTION: Irritating to mouth, throat and
stomach. If ingested this product may cause vomiting, diarrhea, and
depressed respiration.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Inhalation of dust may
result in pulmonary and respiratory damages.
MEDICAL CONDITIONS WHICH MAY BE AGGRAVATED BY CONTACT: If dry sanded,
asthma and asthma-like conditions may worsen from prolonged or repeated
exposure to dust.
PRIMARY ROUTE(S) OF ENTRY: SKIN CONTACT INHALATION
|-------------------------------------------------------------------------|
| SECTION 4 - FIRST AID MEASURES |
|-------------------------------------------------------------------------|
EYE CONTACT: Flush with large quantities of water until irritation
subsides.
SKIN CONTACT: Wash with soap and water.
INHALATION: Remove to fresh air.
INGESTION: DO NOT INDUCE VOMITING.
COMMENTS: Call Medical in Section 1 if irritation or complications arise
from any of the above routes of exposure.
|-------------------------------------------------------------------------|
| SECTION 5 - FIRE FIGHTING MEASURES |
|-------------------------------------------------------------------------|
FLASH POINT: >200 F LOWER EXPLOSIVE LIMIT: N.A.
(SETAFLASH CLOSED CUP) UPPER EXPLOSIVE LIMIT: N.A.
AUTOIGNITION TEMPERATURE: N.E.
(Continued on Page 3)
--------------------------------------------------------------------------
Product Name: DAP Finishing Putty(All Colors)
Revision Date: 08/25/2000 Page 3
|-------------------------------------------------------------------------|
| SECTION 5 - FIRE FIGHTING MEASURES |
|-------------------------------------------------------------------------|
EXTINGUISHING MEDIA: CO2 DRY CHEMICAL FOAM WATER FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS: None known.
SPECIAL FIREFIGHTING PROCEDURES: As in any fire, wear self-contained
breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and
full protective gear. Use water spray to cool exposed surfaces.
|-------------------------------------------------------------------------|
| SECTION 6 - ACCIDENTAL RELEASE MEASURES |
|-------------------------------------------------------------------------|
SPILL OR LEAK PROCEDURES: Scrape up dried material and place into
containers.
|-------------------------------------------------------------------------|
| SECTION 7 - HANDLING AND STORAGE |
|-------------------------------------------------------------------------|
HANDLING INFORMATION: KEEP OUT OF REACH OF CHILDREN. Avoid prolonged or
repeated contact with skin. Avoid contact with eyes.
STORAGE INFORMATION: Store away from caustics and oxidizers. Keep
containers tightly closed when not in use. Keep containers from excessive
heat and freezing. Do not store at temperatures above 120 degrees F.
OTHER PRECAUTIONS: Use in a well ventilated area. Provide fresh air such
that chemical odors cannot be detected during use and while drying. None.
|-------------------------------------------------------------------------|
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
|-------------------------------------------------------------------------|
ENGINEERING CONTROLS: Good mechanical ventilation and local exhaust.
RESPIRATORY PROTECTION: A respiratory protection program that meets OSHA
1910.134 and ANSI Z88.2 requirements must be followed whenever workplace
conditions warrant a respirator's use. Not required under normal usage and
adequate ventilation.
EYE PROTECTION: Safety glasses with side shields recommended.
SKIN PROTECTION: Gloves recommended for repeated or prolonged contact with
skin.
OTHER PROTECTIVE EQUIPMENT: None.
(Continued on Page 4)
--------------------------------------------------------------------------
Product Name: DAP Finishing Putty(All Colors)
Revision Date: 08/25/2000 Page 4
|-------------------------------------------------------------------------|
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
|-------------------------------------------------------------------------|
HYGIENIC PRACTICES: Although this product is not considered an eye
irritant, inhalation hazard, or a skin contact hazard under normal
conditions, it is advisable that personnel minimize skin contact,
inhalation of vapors, and eye contact. Wash contaminated clothing before
reuse.
|-------------------------------------------------------------------------|
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES |
|-------------------------------------------------------------------------|
BOILING RANGE : N.A. VAPOR DENSITY : N.E.
ODOR : Mild Odor
APPEARANCE : Colored paste EVAPORATION RATE: N.E.
SOLUBILITY IN H2O : Negligible
SPECIFIC GRAVITY : 2.1693
VAPOR PRESSURE : N.E.
PHYSICAL STATE : Paste
(See Section 16 for abbreviation legend)
|-------------------------------------------------------------------------|
| SECTION 10 - STABILITY AND REACTIVITY |
|-------------------------------------------------------------------------|
CONDITIONS TO AVOID: Excessive heat and freezing.
INCOMPATIBILITY: Strong oxidizers and caustics.
HAZARDOUS DECOMPOSITION PRODUCTS: Normal decomposition products, i.e. COx,
NOx
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
|-------------------------------------------------------------------------|
| SECTION 11 - TOXICOLOGICAL PROPERTIES |
|-------------------------------------------------------------------------|
The toxicological properties of this material are unknown, however,
based on the toxicity of its constituents, it is expected to have
relatively low toxicity.
|-------------------------------------------------------------------------|
| SECTION 12 - ECOLOGICAL INFORMATION |
|-------------------------------------------------------------------------|
No Information.
(Continued on Page 5)
--------------------------------------------------------------------------
Product Name: DAP Finishing Putty(All Colors)
Revision Date: 08/25/2000 Page 5
|-------------------------------------------------------------------------|
| SECTION 13 - DISPOSAL CONSIDERATIONS |
|-------------------------------------------------------------------------|
WASTE MANAGEMENT/DISPOSAL: Dispose of according to Federal, State, and
Local Standards. This product does not meet the definition of a hazardous
waste according to U.S. EPA Hazardous Waste Management Regulations, 40 CFR
Section 261. State and Local regulations/restrictions are complex and may
differ from Federal regulations. Responsibility for proper waste disposal
is with the owner of the waste.
EPA WASTE CODE - If discarded (40 CFR 261): None.
|-------------------------------------------------------------------------|
| SECTION 14 - TRANSPORTATION INFORMATION |
|-------------------------------------------------------------------------|
DOT PROPER SHIPPING NAME: Not Regulated by D.O.T.
DOT HAZARD CLASS: NONE
DOT UN/NA NUMBER: NONE PACKING GROUP: NONE
|-------------------------------------------------------------------------|
| SECTION 15 - REGULATORY INFORMATION |
|-------------------------------------------------------------------------|
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
----------- CHEMICAL NAME ----------- CAS NUMBER WT/WT % RANGE
No SARA Section 313 chemicals in this product are to be reported.
TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12(B) if exported from the United States:
----------- CHEMICAL NAME ----------- CAS NUMBER
No information is available.
(Continued on Page 6)
--------------------------------------------------------------------------
Product Name: DAP Finishing Putty(All Colors)
Revision Date: 08/25/2000 Page 6
|-------------------------------------------------------------------------|
| SECTION 15 - REGULATORY INFORMATION |
|-------------------------------------------------------------------------|
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:
----------- CHEMICAL NAME ----------- CAS NUMBER
Calcium Carbonate 1317-65-3
Soybean Oil TSRN-618608-5119P
Paraffinic Process Oil TSRN-618608-5166P
Linseed Oil TSRN-618608-5069P
Hydrous magnesium silicate 14807-96-6
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at
greater than 3%:
----------- CHEMICAL NAME ----------- CAS NUMBER
Calcium Carbonate 1317-65-3
Degummed soybean oil proprietary
Paraffinic Process Oil proprietary
CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are
known to the state of California to cause cancer, birth defects or other
reproductive harm:
----------- CHEMICAL NAME ----------- CAS NUMBER
No Proposition 65 chemicals are known to exist in this product.
INTERNATIONAL REGULATIONS: AS FOLLOWS -
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: Not Regulated.
(Continued on Page 7)
--------------------------------------------------------------------------
Product Name: DAP Finishing Putty(All Colors)
Revision Date: 08/25/2000 Page 7
|-------------------------------------------------------------------------|
| SECTION 16 - OTHER INFORMATION |
|-------------------------------------------------------------------------|
HMIS RATINGS - HEALTH: 0 FLAMMABILITY: 1 REACTIVITY: 0
PREVIOUS MSDS REVISION DATE: 01/04/2000
VOC less water, less exempt solvent: 40-50 gm/l(2.0-3.0)
VOC material : 40-50 gm/l
LEGEND: ACGIH - AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
N.A. - NOT APPLICABLE
N.E. - NOT ESTABLISHED
PEL - PERMISSIBLE EXPOSURE LIMIT
NTP - NATIONAL TOXICOLOGY PROGRAM
SARA - SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986
STEL - SHORT TERM EXPOSURE LIMIT
TLV - THRESHOLD LIMIT VALUE(8 HR. TIME WEIGHTED AVERAGE OR TWA)
VOC - VOLATILE ORGANIC COMPOUND
NJRTK - NEW JERSEY RIGHT TO KNOW LAW
N.D. - NOT DETERMINED
MSDS# 77064
---------------------------------------------------------------------------
This data is offered in good faith as typical values and not as a product
specification. No warranty either expressed or implied, is hereby made.
The recommended industrial hygiene and safe handling procedures are
believed to be generally applicable. However, each user should review the
recommendations in specific context of the intended use and determine if
they are appropriate.
---------------------------------------------------------------------------
< End OF MSDS >
|