Unifrax Australia Pty. Ltd.
326 Settlement Road
Thomastown, VIC 3074
INSULFRAX庐
ACN 093 625 757
Ph: (03) 9463 0000 Fax: (03) 9464 1176
MATERIAL SAFETY DATA SHEET
No Classification under EEC Directive 76/548/EEF
Refer Worksafe Australia Classifying Clause 1.14
1. IDENTIFICATION OF MATERIAL & SUPPLIER
Insulfrax庐
Product Names
Insulfoam
Other Names Carbowool
Spun Bulk Fibre
Blanket
Modules
Insulfrax Rope
Insulfrax Braids
Insulfrax S
UN Number None allocated
DG Class None allocated
Manufacturer's Product None
Code
Hazchem Code Not allocated
Poisons Schedule None allocated
Product Use Heat Insulation
Manufacturer/Supplier: Unifrax Limited Unifrax Australia Pty. Ltd.
Mill Lane, Rainford 336 Settlement Road
St. Helens Thomastown 3074
Merseyside 20 WA118L Victoria
UK Australia
Contact Information: See page 6.
2. HAZARDS IDENTIFICATION
Flammability
Fire Hazards: Non flammable
Explosive Hazards: Non explosive
Authorised by: Alan Smith
Version: 1.3
Control Status: Controlled Document
Created on: 01/08/07 1
Unifrax Australia Pty. Ltd.
326 Settlement Road
Thomastown, VIC 3074
INSULFRAX庐
ACN 093 625 757
Ph: (03) 9463 0000 Fax: (03) 9464 1176
MATERIAL SAFETY DATA SHEET
No Classification under EEC Directive 76/548/EEF
Refer Worksafe Australia Classifying Clause 1.14
Health Hazards: Temporary irritation to eyes, skin, respiratory system and
disturbances to Gastro intestines.
3. COMPOSITION AND INFORMATION ON INGREDIENTS
Ingredients: Name CAS Proportion
Calcium Silicate 65997-17-3 100%
Magnesia
4. FIRST AID MEASURES
Ingestion: Drink plenty of water..
Eye: Flush immediately with large amount of water.
Skin: Rinse affected areas with water and soap. Do not use
detergent.
Inhalation: Remove exposed person/s from source of exposure to
fresh air. Blow nose to evacuate fibres.
ADVICE TO DOCTOR: Acute irritation and/or inflammation are due to mechanical
action.
5. FIRE FIGHTING MEASURES.
Fire Explosion Hazard: Not Flammable and not explosive.
Hazardous Reactions/ Refer to SAFE HANDLING INFORMATION
Decomposition Products
Hazchem Code: None Allocated.
Authorised by: Alan Smith
Version: 1.3
Control Status: Controlled Document
Created on: 01/08/07 2
Unifrax Australia Pty. Ltd.
326 Settlement Road
Thomastown, VIC 3074
INSULFRAX庐
ACN 093 625 757
Ph: (03) 9463 0000 Fax: (03) 9464 1176
MATERIAL SAFETY DATA SHEET
No Classification under EEC Directive 76/548/EEF
Refer Worksafe Australia Classifying Clause 1.14
6. ACCIDENTAL RELEASE MEASURES
Spills or Release Do not flush into drain. Prevent entry into waterways.
To the Environment Do not allow to be windblown.
Use vacuum cleaning equipment fitted with HEPA filters to
collect debris. Use dust extraction equipment. Avoid
procedures that will generate airborne fibres.
7. HANDLING & STORAGE
Storage Precautions: Keep packaged in original packaging when not in use.
Safe Handling: Respirators, gloves & safety eye ware are recommended.
8. EXPOSURE CONTROLS & PERSONAL PROTECTION
Exposure Limits: Name CAS No. Exposure
Calcium Silicate 65997-17-3 TWA .5 f/ml **
Magnesia.
** National Occupational and Safety Commission -
National Code of Practice for the safe use of Synthetic
Fibers.
This Product was invented in 1992, no epidemiological or
toxicological studies are available. Studies based on
chemically similar fibre using lifetime nose only inhalation,
showed no fibrosis or significant increase in lung tumours
in exposed animals. In addition, lifetime studies with
fibreglass show no irreversible effects.
As available, animal study results with Insulfrax fibre will
be presented.
Personal Protection: Respirators are recommended. All respirators used shall
comply with the provisions of AS1715 and 1716. Gloves
are recommended to avoid skin irritation. Safety eye ware
Is also recommended particularly for above head work.
Authorised by: Alan Smith
Version: 1.3
Control Status: Controlled Document
Created on: 01/08/07 3
Unifrax Australia Pty. Ltd.
326 Settlement Road
Thomastown, VIC 3074
INSULFRAX庐
ACN 093 625 757
Ph: (03) 9463 0000 Fax: (03) 9464 1176
MATERIAL SAFETY DATA SHEET
No Classification under EEC Directive 76/548/EEF
Refer Worksafe Australia Classifying Clause 1.14
9. PHYSICAL & CHEMICAL PROPERTIES
Appearance Off white - bluish fibre
>1260oc
Boiling/Melting Point
Vapour Pressure Not determinable
Specific Gravity 2.6
Flash Point Not determinable
Flamm. Limit Not determinable
Solubility in Water(g/L) < 0.1
10. STABILITY & REACTIVITY
Stability: Stable under normal conditions of use.
Hazardous Reactions Refer to SAFE HANDLING INFORMATION
Decomposition Products
11. TOXICOLOGICAL INFORMATION
Toxicology data and epidemiological studies are not available. Refer to 'Precautions for
Use' section for further information.
.
12. ECOLOGICAL INFORMATION
Not available
13. DISPOSAL CONSIDERATIONS
Waste Disposal: Waste shall be placed in containers, plastic bags or other
methods which will prevent Fiber and/or dust emission and
disposed of in accordance with the local waste disposal
authority requirements. There may be specific regulations
at the Local, State or Federal level that pertain to this
material.
Authorised by: Alan Smith
Version: 1.3
Control Status: Controlled Document
Created on: 01/08/07 4
Unifrax Australia Pty. Ltd.
326 Settlement Road
Thomastown, VIC 3074
INSULFRAX庐
ACN 093 625 757
Ph: (03) 9463 0000 Fax: (03) 9464 1176
MATERIAL SAFETY DATA SHEET
No Classification under EEC Directive 76/548/EEF
Refer Worksafe Australia Classifying Clause 1.14
14. TRANSPORT INFORMATION
No special transport requirements are necessary.
UN Number None Allocated
Shipping Name None Allocated
DG Class None Allocated
Packaging Group None Allocated
Hazchem Code None Allocated
Poisons Schedule Not Scheduled
Product Use: Thermal Insulation
15. REGULATORY INFORMATION
Risk Statement: Irritation or soreness in throat and nose congestion may occur
in extreme exposures.
Safety Statement: S22 Do not breathe dust. S52 Avoid contact with eyes. S38
In insufficient ventilation, wear suitable respiratory equipment.
S40 To clean floor and all objects contaminated by this
Material, use AS approved HEPA fitted vacuum cleaner.
S36/37/39 Wear suitable protective clothing, gloves and eye/
Face protection.
Hazard Category: Irritant.
Poisons Schedule: Not scheduled.
Authorised by: Alan Smith
Version: 1.3
Control Status: Controlled Document
Created on: 01/08/07 5
Unifrax Australia Pty. Ltd.
326 Settlement Road
Thomastown, VIC 3074
INSULFRAX庐
ACN 093 625 757
Ph: (03) 9463 0000 Fax: (03) 9464 1176
MATERIAL SAFETY DATA SHEET
No Classification under EEC Directive 76/548/EEF
Refer Worksafe Australia Classifying Clause 1.14
16. OTHER INFORMATION
+61 3 9463 0000
Contact: During Business Hours Ph:
Customer Service Toll Free: Ph: 1300 797 888
Emergency / After Hours Contact: Alan Smith
Ph: 0409 288 916
References: Replaces MSDS dated 27 March 2007.
NOTICE: The information presented herein is based on data considered to be accurate as of
the date of preparation of this Material Safety Data Sheet. However, no
warranty or representation, express or implied, is made as to the accuracy or
completeness of the foregoing data and safety information, nor is any
authorisation given or implied to practise any patented invention without licence.
In addition, no responsibility can be assumed by the vendor for any damage or
injury resulting from abnormal use, from any failure to adhere to recommended
practices, or from any hazards inherent in the nature of the product.
鈥︹?nd of Report鈥︹??
Authorised by: Alan Smith
Version: 1.3
Control Status: Controlled Document
Created on: 01/08/07 6
|