Unifrax Australia Pty. Ltd.
326 Settlement Road
Thomastown, VIC 3074
KUB CEMENT
ACN 093 625 757
Ph: (03) 9463 0000 Fax: (03) 9464 1176
MATERIAL SAFETY DATA SHEET
Classified as Hazardous according to criteria of Worksafe Australia
1. IDENTIFICATION OF MATERIAL & SUPPLIER
Product Name: KUB cement
Other Names CBS, CBSW, Refractory cement.
UN Number: None allocated
DG Classification: None allocated
Hazchem Code: None allocated
Poisons Schedule No: None allocated
Product Use: Refractory cement
Manufacturer/Supplier: Unifrax Limited Unifrax Australia Pty. Ltd.
Mill Lane, Rainford 336 Settlement Road
St. Helens Thomastown 3074
Merseyside 20 WA118L Victoria
UK Australia
Contact: See Page 6.
2. HAZARDS IDENTIFICATION
Flammability
Fire Hazards: Non flammable
Explosive Hazards: Non explosive
Health Hazards: Possible irritation to eyes, skin, respiratory system and
disturbances to gastro intestines.
3. COMPOSITION AND INFORMATION ON INGREDIENTS
Chemical Name CAS Number Proportion
Alumina (Al2O3) 1344-28-1 10-<30%
Calcium Aluminate Cement 65997-16-2 10-30%
Fumed Silica 7631-86-9 10-30%
Calcium Silicate 13983-17-0 10-30%
Authorised by: Alan Smith
Version: 1.3
Control Status: Controlled Document
Created on: 01/08/07 1
Unifrax Australia Pty. Ltd.
326 Settlement Road
Thomastown, VIC 3074
KUB CEMENT
ACN 093 625 757
Ph: (03) 9463 0000 Fax: (03) 9464 1176
MATERIAL SAFETY DATA SHEET
Classified as Hazardous according to criteria of Worksafe Australia
3. Composition & Information on Ingredients cont鈥檇:
Chemical Name CAS Number Proportion
Alumino silicate 1302-78-9 <10%
Total other non hazardous (each <1%) 0-5%
4. FIRST AID MEASURES
Ingestion Drink water do not induce vomiting.
Eye Flush continuously with water for 15 minutes, Eyelids to be
held open, do not rub eyes.
Skin If skin becomes irritated remove clothing wash areas of
contact with soap and water. Using a skin cream or lotion
may be helpful in reducing irritation.
Inhalation Remove exposed person to fresh air.
Advice to Doctor Treat symptomatically for irritant effects of liquid or dust.
5. FIRE FIGHTING MEASURES.
Fire Explosion Hazard: Not Flammable and not explosive.
Hazardous Reactions/ Refer to SAFE HANDLING INFORMATION
Decomposition Products
Hazchem Code: None Allocated.
This material is non-combustible, use extinguishing media appropriate to surrounding
fire.
Authorised by: Alan Smith
Version: 1.3
Control Status: Controlled Document
Created on: 01/08/07 2
Unifrax Australia Pty. Ltd.
326 Settlement Road
Thomastown, VIC 3074
KUB CEMENT
ACN 093 625 757
Ph: (03) 9463 0000 Fax: (03) 9464 1176
MATERIAL SAFETY DATA SHEET
Classified as Hazardous according to criteria of Worksafe Australia
6. ACCIDENTAL RELEASE MEASURES
Spills and Leaks:
Pick up large quantities with a shovel and place in
containers. Where possible, use a vacuum cleaner to
clean up smaller spills.
7. HANDLING & STORAGE
Handling: Wear rubber or PVC gloves and eye protection when
handling product.
Storage: Store in a cool dry place.
8. EXPOSURE CONTROLS & PERSONAL PROTECTION
Exposure Standards:
Name TWA (NOHSC 1995, 1996)
10 mg/m3 inspirable dust
Clay
10 mg/m3 inspirable dust
Colloidal amorphous silica
60 mg/m3
Ethylene glycol (vapour)
Compliance with the dust exposure standard for the dried
product should prevent impairment of respiratory function
even over many years of exposure (NOHSC Exposure
Standards, 14.26-14.29, 1995)
Chronic Health Effects:
Compliance with the exposure standard should prevent
impairment of respiratory function even over many years of
exposure (refer NOHSC Exposure Standards, 14.26-
14.29, 1995)
Authorised by: Alan Smith
Version: 1.3
Control Status: Controlled Document
Created on: 01/08/07 3
Unifrax Australia Pty. Ltd.
326 Settlement Road
Thomastown, VIC 3074
KUB CEMENT
ACN 093 625 757
Ph: (03) 9463 0000 Fax: (03) 9464 1176
MATERIAL SAFETY DATA SHEET
Classified as Hazardous according to criteria of Worksafe Australia
8. Exposure Controls & Personal Protection cont鈥檇:
Engineering Controls: Where possible use local exhaust ventilation for handling
dried product.
PERSONAL PROTECTION
Respiratory Protection: For the dried product, a half-face (P1 or P2) respirator
should be worn during work in enclosed or poorly
ventilated spaces, or where evidence suggests that dust
levels may exceed the exposure standard. All respiratory
devices should be tested for compliance with AS/NZS
1715 & AS/NZS 1716.
Eye Protection: Safety glasses, goggles or face-shield as appropriate.
Glove Type: Rubber or PVA.
Clothing: Overalls or similar protective apparel.
Footwear: Safety footwear as appropriate.
9. PHYSICAL & CHEMICAL PROPERTIES
Appearance: Aggregate and powder mix
>1800oC
Melting Point:
Boiling Point: N/A
Vapour Pressure: N/A
Specific Gravity: ~2.5
Flash Point: N/A
Flammability Limits: N/A
Solubility in Water: Insoluble
Authorised by: Alan Smith
Version: 1.3
Control Status: Controlled Document
Created on: 01/08/07 4
Unifrax Australia Pty. Ltd.
326 Settlement Road
Thomastown, VIC 3074
KUB CEMENT
ACN 093 625 757
Ph: (03) 9463 0000 Fax: (03) 9464 1176
MATERIAL SAFETY DATA SHEET
Classified as Hazardous according to criteria of Worksafe Australia
10. STABILITY & REACTIVITY
Stability: Stable under normal conditions of use.
Hazardous Reactions Not combustible.
Decomposition Products
11. TOXICOLOGICAL INFORMATION
Not available
12. ECOLOGICAL INFORMATION
Not available
13. DISPOSAL CONSIDERATIONS
Waste Disposal: Waste should be placed in containers, plastic bags or other
methods which prevent liquid or dust emission, and
disposed of in accordance with the local waste disposal
authority requirements.
14. TRANSPORT INFORMATION
No special transport requirements are necessary.
UN Number None Allocated
Shipping Name None Allocated
DG Class None Allocated
Packaging Group None Allocated
Hazchem Code None Allocated
Poisons Schedule Not Scheduled
Authorised by: Alan Smith
Version: 1.3
Control Status: Controlled Document
Created on: 01/08/07 5
Unifrax Australia Pty. Ltd.
326 Settlement Road
Thomastown, VIC 3074
KUB CEMENT
ACN 093 625 757
Ph: (03) 9463 0000 Fax: (03) 9464 1176
MATERIAL SAFETY DATA SHEET
Classified as Hazardous according to criteria of Worksafe Australia
15. REGULATORY INFORMATION
Risk Statement: R40 (3) Possible risk of irreversible effects. R36/37/38
Irritating to eyes, respiratory system and skin.
Safety Statement: S22 Do not breathe dust. S52 Avoid contact with eyes. S38
In insufficient ventilation, wear suitable respiratory equipment.
S40 To clean floor and all objects contaminated by this
Material, use AS approved HEPA fitted vacuum cleaner.
S36/37/39 Wear suitable protective clothing, gloves, eye/
face protection and footwear.
Hazard Category: Harmful, irritant.
Poisons Schedule: Not scheduled.
16. OTHER INFORMATION
Contact: During Business Hours Ph: +61 3 9463 0000
Customer Service Toll Free: Ph: 1300 797 888
Emergency / After Hours Contact: Alan Smith
Ph: 0409 288 916
References: Replaces MSDS dated 27 March 2007.
Authorised by: Alan Smith
Version: 1.3
Control Status: Controlled Document
Created on: 01/08/07 6
Unifrax Australia Pty. Ltd.
326 Settlement Road
Thomastown, VIC 3074
KUB CEMENT
ACN 093 625 757
Ph: (03) 9463 0000 Fax: (03) 9464 1176
MATERIAL SAFETY DATA SHEET
Classified as Hazardous according to criteria of Worksafe Australia
NOTICE: The information presented herein is based on data considered to be accurate
as of the date of preparation of this Material Safety Data Sheet. However, no
warranty or representation, express or implied, is made as to the accuracy or
completeness of the foregoing data and safety information, nor is any
authorisation given or implied to practise any patented invention without licence.
In addition, no responsibility can be assumed by the vendor for any damage or
injury resulting from abnormal use, from any failure to adhere to recommended
practices, or from any hazards inherent in the nature of the product.
鈥︹?nd of Report鈥︹??
Authorised by: Alan Smith
Version: 1.3
Control Status: Controlled Document
Created on: 01/08/07 7
|