MATERIAL SAFETY DATA SHEET
This MSDS complies with OSHA'S Hazard Communication Standard 29 CFR 1910.1200 and OSHA Form 174
IDENTITY AND MANUFACTURER'S INFORMATION
NFPA Rating: Health-1; Flammability-1; Reactivity-0; Special-0 HMIS Rating: Health-1; Flammability-1; Reactivity-0; Personal
Protection-B
Manufacturer's Name: AMREP, INC. DOT Hazard Classification: ORM-D
Address: 990 Industrial Park Drive Identity (trade name as used on label):
Marietta, GA 30062 MISTY PAINLESS STAINLESS
Date Prepared: 02/23/00 Prepared By: LF/CH MSDS Number: 142 Revision- 11
Information Calls: (770)422-2071 NOTICE: JUDGEMENT BASED ON INDIRECT TEST DATA
EMERGENCY RESPONSE NUMBER: 1(800)255-3924
SECTION 1 - MATERIAL IDENTIFICATION AND INFORMATION
COMPONENTS-CHEMICAL NAMES AND COMMON NAMES CAS Number SARA OSHA PEL ACGIH Carcinogen
(Hazardous Components 1% or greater; Carcinogens 0.1% or greater) III LIST (ppm) TLV (ppm) Ref. Source **
ISOBUTANE / PROPANE BLEND 75-28-5 No 800 800 d
74-98-6 No 1000 1000 d
PETROLEUM SOLVENT 64742-54-7 No 5mg/m3 5mg/m3 d
PETROLEUM DISTILLATE 8052-41-3 No 100 100 d
SECTION 2 - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: N/A Specific Gravity (H2O=1): Concentrate Only = 0.908
Vapor Pressure: PSIG @ 70掳F (Aerosols): Max.60 Vapor Pressure (Non-Aerosols)(mm Hg and Temperature): N/A
Vapor Density (Air = 1): N/E Evaporation Rate ( BuAc = 1): N/E
Solubility in Water: Soluble Water Reactive: No
Appearance and Odor: White foam with light lemon fragrance.
SECTION 3 - FIRE AND EXPLOSION HAZARD DATA
FLAMMABILITY as per USA FLAME PROJECTION TEST Auto Ignition Temperature Flammability Limits in Air by % in Volume:
(aerosols) NON-FLAMMABLE N/E % LEL: N/E % UEL: N/E
FLASH POINT AND METHOD USED (non-aerosols): N/A EXTINGUISHER MEDIA: Foam, dry chemical, carbon dioxide, water.
SPECIAL FIRE FIGHTING PROCEDURES: Self-contained breathing apparatus.
Unusual Fire & Explosion Hazards: Do not expose aerosols to temperatures above 130掳F or the container may rupture.
SECTION 4 - REACTIVITY HAZARD DATA
STABILITY [ X ] STABLE [ ] UNSTABLE HAZARDOUS POLYMERIZATION [ ] WILL [ X ] WILL NOT OCCUR
Incompatibility (Mat. to avoid): Strong oxidizers. Conditions to Avoid: Open flame, welding arcs, heat.
Hazardous Decomposition Products: CO, CO2.
SECTION 5 - HEALTH HAZARD DATA
PRIMARY ROUTES OF ENTRY: [ X ] INHALATION [ ] INGESTION [ X ] SKIN ABSORPTION [ ] EYE [ ] NOT HAZARDOUS
ACUTE EFFECTS:
Inhalation: Excessive inhalation of vapors can be harmful and may cause headache, dizziness, asphyxia, anesthetic effects and possible unconsciousness.
Eye Contact: Mild irritation. Skin Contact: May aggravate existing skin conditions.
Ingestion: Possible chemical pneumonitis if aspirated into lungs. Nausea.
CHRONIC EFFECTS: (Effects due to excessive exposure to the raw materials of this mixture) May cause headaches, dizziness and nausea.
Medical Conditions Generally Aggravated by Exposure: May aggravate existing eye, skin, or upper respiratory conditions.
EMERGENCY FIRST AID PROCEDURES
Eye Contact: Flush with water for 15 minutes. If irritated, seek medical attention.
Skin Contact: Wash with soap and water. If irritated, seek medical attention.
Inhalation: Remove to fresh air. Resuscitate if necessary. Get medical attention.
Ingestion: DO NOT INDUCE VOMITING. Drink two large glasses of water. Get immediate medical attention.
SECTION 6 - CONTROL AND PROTECTIVE MEASURES
Respiratory Protection (specify type): If vapor concentration exceeds TLV, use respirator approved by NIOSH in a positive pressure mode.
Protective Gloves: Latex if skin easily irritated. Eye Protection: Safety glasses recommended.
Ventilation Requirements: Adequate ventilation to keep vapor concentration below TLV.
Other Protective Clothing & Equipment: None
Hygienic Work Practices: Wash with soap and water before handling food. Remove contaminated clothing.
SECTION 7 - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps To Be Taken If Material Is Spilled Or Released: Absorb spilled liquid with suitable medium. Place in closed drum for proper disposal. Incinerate or
landfill according to local, state or Federal regulations. DO NOT FLUSH LIQUID TO SEWER.
Waste Disposal Methods: Aerosol cans when vented to atmospheric pressure through normal use, pose no disposal hazard.
Precautions To Be Taken In Handling & Storage: Do not puncture or incinerate containers. Do not store at temperatures above 130掳F.
Other Precautions &/or Special Hazards: KEEP OUT OF REACH OF CHILDREN. Avoid food contamination. Avoid breathing vapors.
We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind.
** Chemical Listed as Carcinogen or Potential Carcinogen. [a] NTP [b] IARC Monograph [c] OSHA [d] Not Listed [e] Animal Data Only
|