EMS CATALOG NO: 14042
EMS PRODUCT: Durcupan Compo-
nent B
DATE: 04/11/2001
PAGE NUMBER: One of 4
MATERIAL SAFETY DATA SHEET
The information contained herein is based on data considered
accurate. However, no warranty is expressed or implied
regarding the accuracy of these data or the results to be
obtained from the use thereof.
Electron Microscopy Sciences assumes no responsibility for
personal injury or property damage to vendees, users or
third parties caused by the material. Such vendees or users
assume all risks associated with the use of the material.
ELECTRON MICROSCOPY SCIENCES
321 MORRIS ROAD
P.O. BOX 251
24 HOUR EMERGENCY PHONE
FORT WASHINGTON, PA 19034
NUMBER
(215) 646-1566 CHEMTREC: (800) 424-9300
_________________________________________________________________
FOR PRODUCT AND SALES INFORMATION
_________________________________________________________________
CONTACT ELECTRON MICROSCOPY SCIENCES OFFICE ABOVE.
PRODUCT NAME: DurcupanR ACM Fluka, Component B - Hardener 964
pH VALUE: 4 (In water)
HAZARDS IDENTIFICATION: Data not available.
________________________________________________________________
FIRST AID MEASURES
________________________________________________________________
CONTACT WITH EYES: Rinse immediately with plenty of water
and seek medical advice.
CONTACT WITH SKIN: Wash immediately with plenty of soap
and water.
IF SWALLOWED: Seek medical advice immediately and
show container or label.
FIRE FIGHTING MEASURES
_________________________________________________________________
EXTINGUISHING MEDIA: Water spray.
Carbon Dioxide, dry chemical powder
or appropriate foam.
SPECIAL FIREFIGHTING PROCEDURES:
Wear self-contained breathing apparatus and protective
clothing to prevent contact with skin and eyes.
UNUSUAL FIRE AND EXPLOSIONS HAZARDS:
Hazardous polymerization will not occur.
ACCIDENTAL RELEASE MEASURES:
Absorb on sand or vermiculite and place in closed containers
for disposal. Wash spill site with soap solution. Flush
spill area with copious amounts of water.
ADDITIONAL INFORMATION: Dicarboxylic Anhydride.
EXPOSURE CONTROLS/PERSONAL PROTECTION:
In case of insufficient ventilation, wear suitable
respiratory equipment.
Compatible chemical-resistant gloves.
Chemical safety goggles.
Do not breathe vapor.
Avoid contact with skin and eyes.
Keep container tightly closed.
Keep container in a well ventilated place.
Use only in well ventilated areas.
_________________________________________________________________
PHYSICAL AND CHEMICAL PROPERTIES
_________________________________________________________________