MATERIAL SAFETY 3M
DATA SHEET 3M Center
St. Paul, Minnesota
55144-1000
1-800-364-3577 or (651) 737-6501 (24 hours)
Copyright, 2001, Minnesota Mining and Manufacturing Company.
All rights reserved. Copying and/or downloading of this
information for the purpose of properly utilizing 3M products
is allowed provided that:
1) the information is copied in full with no changes unless
prior agreement is obtained from 3M, and
2) neither the copy nor the original is resold or otherwise
distributed with the intention of earning a profit thereon.
DIVISION: ENGINEERED ADHESIVES
TRADE NAME:
Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack Part A & B
ID NUMBER/U.P.C.:
62-9740-9939-2 00-21200-85862-8
ISSUED: May 30, 2001
SUPERSEDES: August 28, 1996
DOCUMENT: 11-6520-8
This product is a kit or a multipart product which consists of multiple,
independently packaged components. An MSDS for each of these components is
included. Please do not separate the component MSDSs from this cover page.
The document numbers of the MSDSs for components of this product are:
11-6518-2
11-6519-0
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
-----------------------------------------------------------------------------
The information in this Material Safety Data Sheet (MSDS) is believed to
be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. User is responsible for determining
whether the 3M product is fit for a particular purpose and suitable for
user's method of use or application. Given the variety of factors that
can affect the use and application of a 3M product, some of which are
uniquely within the user's knowledge and control, it is essential that
the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers.
Due to the remote possibility that electronic transfer may have resulted
in errors, omissions or alterations in this information, 3M makes no
representations as to its completeness or accuracy. In addition,
information obtained from a database may not be as current as the
information in the MSDS available directly from 3M.
MATERIAL SAFETY 3M
DATA SHEET 3M Center
St. Paul, Minnesota
55144-1000
1-800-364-3577 or (651) 737-6501 (24 hours)
Copyright, 2001, Minnesota Mining and Manufacturing Company.
All rights reserved. Copying and/or downloading of this
information for the purpose of properly utilizing 3M products
is allowed provided that:
1) the information is copied in full with no changes unless
prior agreement is obtained from 3M, and
2) neither the copy nor the original is resold or otherwise
distributed with the intention of earning a profit thereon.
DIVISION: ENGINEERED ADHESIVES
TRADE NAME:
Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part B)
ISSUED: May 30, 2001
SUPERSEDES: October 25, 2000
DOCUMENT: 11-6518-2
-----------------------------------------------------------------------------
1. INGREDIENT C.A.S. NO. PERCENT
-----------------------------------------------------------------------------
SCOTCH-WELD (TM) DP-100 CLEAR EPOXY
ADHESIVE PART B CONTAINS:............. None Unknown
EPOXY RESIN............................. 25068-38-6 100.0
SCOTCH-WELD (TM) DP-190 GRAY EPOXY
ADHESIVE PART B CONTAINS:............. None Unknown
EPOXY RESIN............................. 25068-38-6 70.0 - 80.0
KAOLIN.................................. 1332-58-7 20.0 - 30.0
SCOTCH-WELD (TM) DP-420 OFF-WHITE EPOXY
ADHESIVE PART B CONTAINS:............. None Unknown
EPOXY RESIN............................. 25068-38-6 80.0 - 90.0
ACRYLIC POLYMER - N.J. TRADE SECRET
(T.S.) REGISTRY #04499600-5018P....... TradeSecret 10.0 - 20.0
MSDS's for individual products DP-100 Part B, DP-190 Part B and
DP-420 Part B are available upon request.
-----------------------------------------------------------------------------
2. PHYSICAL DATA
-----------------------------------------------------------------------------
BOILING POINT:................. N/A
VAPOR PRESSURE:................ N/A
VAPOR DENSITY:................. N/A
EVAPORATION RATE:.............. N/A
SOLUBILITY IN WATER:........... nil
SPECIFIC GRAVITY:.............. 1.140 - 1.330 Water=1
PERCENT VOLATILE:.............. 0.00 % by wt
pH:............................ N/A
VISCOSITY:..................... N/A
MELTING POINT:................. N/D
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part B)
May 30, 2001 PAGE 2
-----------------------------------------------------------------------------
2. PHYSICAL DATA (continued)
-----------------------------------------------------------------------------
APPEARANCE AND ODOR:
medium syrup, DP-100 straw colored, DP-190 & DP-420 white, very mild
odor.
-----------------------------------------------------------------------------
3. FIRE AND EXPLOSION HAZARD DATA
-----------------------------------------------------------------------------
FLASH POINT:................... > 340.00 F COC
FLAMMABLE LIMITS - LEL:........ N/A
FLAMMABLE LIMITS - UEL:........ N/A
AUTOIGNITION TEMPERATURE:...... N/D
EXTINGUISHING MEDIA:
Water, Carbon dioxide, Dry chemical, Foam
SPECIAL FIRE FIGHTING PROCEDURES:
Wear full protective clothing, including helmet, self-contained,
positive pressure or pressure demand breathing apparatus, bunker coat
and pants, bands around arms, waist and legs, face mask, and
protective covering for exposed areas of the head.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
None known.
NFPA HAZARD CODES: HEALTH: 1 FIRE: 0 REACTIVITY: 1
UNUSUAL REACTION HAZARD: none
-----------------------------------------------------------------------------
4. REACTIVITY DATA
-----------------------------------------------------------------------------
STABILITY: Stable
INCOMPATIBILITY - MATERIALS/CONDITIONS TO AVOID:
Strong Acids, Strong Oxidizing Agents, Heat. Heat is generated
during cure. Do not cure a mass larger than 50 grams in a confined
space to prevent a premature reaction (exotherm) with production of
intense heat and smoke.
HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.
HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon Monoxide and Carbon Dioxide, Aldehydes, Ketones, Hydrocarbons,
Toxic Vapors, Gases or Particulates.
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part B)
May 30, 2001 PAGE 3
-----------------------------------------------------------------------------
5. ENVIRONMENTAL INFORMATION
-----------------------------------------------------------------------------
SPILL RESPONSE:
Refer to other sections of this MSDS for information regarding
physical and health hazards, respiratory protection, ventilation, and
personal protective equipment. Cover with absorbent material.
Collect spilled material. Place in a U.S. DOT-approved container.
RECOMMENDED DISPOSAL:
Cure product according to product instructions. Incinerate uncured
waste in an industrial or commercial incinerator. Dispose of
completely cured (or polymerized) material in a sanitary landfill.
ENVIRONMENTAL DATA:
Not determined.
REGULATORY INFORMATION:
Volatile Organic Compounds: 0 gms/liter.
VOC Less H2O & Exempt Solvents: 0 gms/liter.
Since regulations vary, consult applicable regulations or authorities
before disposal. U.S. EPA Hazardous Waste Number = None (Not U.S.
EPA Hazardous).
EPCRA HAZARD CLASS:
FIRE HAZARD: No PRESSURE: No REACTIVITY: No ACUTE: Yes CHRONIC: Yes
-----------------------------------------------------------------------------
6. SUGGESTED FIRST AID
-----------------------------------------------------------------------------
EYE CONTACT:
Immediately flush eyes with large amounts of water. Get immediate
medical attention.
SKIN CONTACT:
Immediately wash skin with soap and large amounts of water. Remove
contaminated clothing. If signs/symptoms occur, call a physician.
Wash contaminated clothing before reuse and dispose of contaminated
shoes.
INHALATION:
If signs/symptoms occur, remove person to fresh air. If
signs/symptoms continue, call a physician.
IF SWALLOWED:
Do not induce vomiting. Drink two glasses of water. Call a physician.
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part B)
May 30, 2001 PAGE 4
-----------------------------------------------------------------------------
7. PRECAUTIONARY INFORMATION
-----------------------------------------------------------------------------
EYE PROTECTION:
Avoid eye contact. Wear vented goggles. Wear safety glasses with
side shields.
SKIN PROTECTION:
Avoid skin contact. Wear appropriate gloves when handling this
material. A pair of gloves made from the following material(s) are
recommended: polyethylene/ethylene vinyl alcohol.
RECOMMENDED VENTILATION:
Provide appropriate local exhaust for grinding, cutting or sanding
cured material. Curing ovens must be exhausted to outdoors or to a
suitable emission control device. Use in a well-ventilated area. If
exhaust ventilation is not adequate, use appropriate respiratory
protection.
RESPIRATORY PROTECTION:
Avoid breathing of vapors created during the cure cycle. Avoid
breathing of dust created by cutting, sanding or grinding. Select
one of the following NIOSH approved respirators based on airborne
concentration of contaminants and in accordance with OSHA
regulations: half-mask dust respirator.
PREVENTION OF ACCIDENTAL INGESTION:
Do not eat, drink or smoke when using this product. Wash exposed
areas thoroughly with soap and water. Do not ingest.
RECOMMENDED STORAGE:
Store away from heat. Keep out of the reach of children.
FIRE AND EXPLOSION AVOIDANCE:
Keep container tightly closed.
OTHER PRECAUTIONARY INFORMATION:
Do not cure up a mass of combined material larger than 50 grams to
prevent the possibility of exotherm.
EXPOSURE LIMITS
INGREDIENT VALUE UNIT TYPE AUTH SKIN*
-----------------------------------------------------------------------------
SCOTCH-WELD (TM) DP-100 CLEAR
EPOXY ADHESIVE PART B CONTAINS:.... NONE NONE NONE NONE
EPOXY RESIN.......................... NONE NONE NONE NONE
SCOTCH-WELD (TM) DP-190 GRAY EPOXY
ADHESIVE PART B CONTAINS:.......... NONE NONE NONE NONE
EPOXY RESIN.......................... NONE NONE NONE NONE
KAOLIN............................... 2 MG/M3 TWA ACGIH
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part B)
May 30, 2001 PAGE 5
EXPOSURE LIMITS (continued)
INGREDIENT VALUE UNIT TYPE AUTH SKIN*
-----------------------------------------------------------------------------
RESPIRABLE
KAOLIN............................... 10 MG/M3 TWA OSHAV
AS DUST
OSHA VACATED PEL
KAOLIN............................... 15 MG/M3 TWA OSHA
AS TOTAL DUST
KAOLIN............................... 5 MG/M3 TWA OSHA
RESPIRABLE
SCOTCH-WELD (TM) DP-420 OFF-WHITE
EPOXY ADHESIVE PART B CONTAINS:.... NONE NONE NONE NONE
EPOXY RESIN.......................... NONE NONE NONE NONE
ACRYLIC POLYMER - N.J. TRADE
SECRET (T.S.) REGISTRY #04499600-
5018P.............................. NONE NONE NONE NONE
* SKIN NOTATION: Listed substances indicated with 'Y' under SKIN refer to
the potential contribution to the overall exposure by the cutaneous route
including mucous membrane and eye, either by airborne or, more particularly,
by direct contact with the substance. Vehicles can alter skin absorption.
SOURCE OF EXPOSURE LIMIT DATA:
- ACGIH: American Conference of Governmental Industrial Hygienists
- OSHA: Occupational Safety and Health Administration
- OSHAV: Occupational Safety and Health Administration Vacated PEL.
Vacated Permissible Exposure Limits (PEL) are enforced as
the OSHA PEL in some states. Check with your local
regulatory authority.
- NONE: None Established
-----------------------------------------------------------------------------
8. HEALTH HAZARD DATA
-----------------------------------------------------------------------------
EYE CONTACT:
Moderate Eye Irritation: signs/symptoms can include redness, swelling,
pain, tearing, and hazy vision.
Vapors from heated material may cause eye irritation.
SKIN CONTACT:
Allergic Skin Reaction: signs/symptoms can include redness, swelling,
blistering, and itching.
Mild Skin Irritation: signs/symptoms can include redness, swelling,
and itching.
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part B)
May 30, 2001 PAGE 6
-----------------------------------------------------------------------------
8. HEALTH HAZARD DATA (continued)
-----------------------------------------------------------------------------
INHALATION:
Irritation (upper respiratory): signs/symptoms can include soreness
of the nose and throat, coughing and sneezing.
Vapors of heated material may cause respiratory system irritation.
Dust from cutting, grinding, sanding or machining may cause
irritation of the respiratory system.
IF SWALLOWED:
Ingestion may cause:
Irritation of Gastrointestinal Tissues: signs/symptoms can
include pain, vomiting, abdominal tenderness, nausea, blood in
vomitus, and blood in feces.
OTHER HEALTH HAZARD INFORMATION:
Exposure to this material in normal storage and handling has not been
reported to cause significant adverse health effects. However, under
normal processing conditions, e.g. grinding or heating, this product
may release fumes and vapors of variable composition based on
specific process conditions. These process releases may produce
irritation or any of the health effects listed above when the
emissions are present at elevated concentrations. Use with
appropriate local exhaust ventilation.
-----------------------------------------------------------------------------
SECTION CHANGE DATES
-----------------------------------------------------------------------------
HEADING SECTION CHANGED SINCE October 25, 2000 ISSUE
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part B)
May 30, 2001 PAGE 7
-----------------------------------------------------------------------------
The information in this Material Safety Data Sheet (MSDS) is believed to
be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. User is responsible for determining
whether the 3M product is fit for a particular purpose and suitable for
user's method of use or application. Given the variety of factors that
can affect the use and application of a 3M product, some of which are
uniquely within the user's knowledge and control, it is essential that
the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers.
Due to the remote possibility that electronic transfer may have resulted
in errors, omissions or alterations in this information, 3M makes no
representations as to its completeness or accuracy. In addition,
information obtained from a database may not be as current as the
information in the MSDS available directly from 3M.
MATERIAL SAFETY 3M
DATA SHEET 3M Center
St. Paul, Minnesota
55144-1000
1-800-364-3577 or (651) 737-6501 (24 hours)
Copyright, 2001, Minnesota Mining and Manufacturing Company.
All rights reserved. Copying and/or downloading of this
information for the purpose of properly utilizing 3M products
is allowed provided that:
1) the information is copied in full with no changes unless
prior agreement is obtained from 3M, and
2) neither the copy nor the original is resold or otherwise
distributed with the intention of earning a profit thereon.
DIVISION: ENGINEERED ADHESIVES
TRADE NAME:
Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part A)
ISSUED: May 30, 2001
SUPERSEDES: April 23, 2001
DOCUMENT: 11-6519-0
-----------------------------------------------------------------------------
1. INGREDIENT C.A.S. NO. PERCENT
-----------------------------------------------------------------------------
SCOTCH-WELD (TM) DP-100 CLEAR EPOXY
ADHESIVE PART A CONTAINS:............. None Unknown
MERCAPTAN TERMINATED POLYMER N.J. TRADE
SECRET REGISTRY NO. 679485-5016P...... TradeSecret 87.0 - 93.0
2,4,6-TRIS (DIMETHYLAMINO)METHYL PHENOL. 90-72-2 7.0 - 13.0
SCOTCH-WELD (TM) DP-190 GRAY EPOXY
ADHESIVE PART A CONTAINS:............. None Unknown
POLYMERIC DIAMINE....................... 68541-13-9 55.0 - 70.0
KAOLIN.................................. 1332-58-7 30.0 - 45.0
CARBON BLACK............................ 1333-86-4 < 0.1
SCOTCH-WELD (TM) DP-420 OFF-WHITE EPOXY
ADHESIVE PART A CONTAINS:............. None Unknown
GLYCOL AMINE - N.J. TRADE SECRET (T.S.)
REGISTRY #04499600-5019P.............. TradeSecret 50.0 - 60.0
MODIFIED DIGLYCIDYL ETHER OF BISPHENOL
A - N.J. TRADE SECRET (T.S.) REGISTRY
#04499600-5023P....................... TradeSecret 20.0 - 30.0
EPOXY RESIN............................. 25068-38-6 1.0 - 10.0
AMORPHOUS SILICA........................ 7631-86-9 1.0 - 10.0
2,4,6-
TRIS((DIMETHYLAMINO)METHYL))PHENOL.... 90-72-2 1.0 - 10.0
SULFONIC ACID SALT - N.J. TRADE SECRET
(T.S.) REGISTRY #04499600-5022P....... TradeSecret 1.0 - 10.0
MSDS's for individual product DP-100 Part A, DP-190 Part A and DP-420
Part A are available upon request.
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part A)
May 30, 2001 PAGE 2
-----------------------------------------------------------------------------
2. PHYSICAL DATA
-----------------------------------------------------------------------------
BOILING POINT:................. N/A
VAPOR PRESSURE:................ N/A
VAPOR DENSITY:................. 3.72 Air=1
EVAPORATION RATE:.............. N/A
SOLUBILITY IN WATER:........... slight
SPECIFIC GRAVITY:.............. 1.120 - 1.260 Water=1
PERCENT VOLATILE:.............. 0.00 % by wt
pH:............................ N/A
VISCOSITY:..................... N/A
MELTING POINT:................. N/D
APPEARANCE AND ODOR:
dp-100 medium liquid, dp-190 paste, dp-420 viscous liquid, DP-100
dark amber, DP-190 gray, DP-420 amber, DP-100 mercaptan odor,
-----------------------------------------------------------------------------
3. FIRE AND EXPLOSION HAZARD DATA
-----------------------------------------------------------------------------
FLASH POINT:................... > 340.00 F TCC
FLAMMABLE LIMITS - LEL:........ N/A
FLAMMABLE LIMITS - UEL:........ N/A
AUTOIGNITION TEMPERATURE:...... N/D
EXTINGUISHING MEDIA:
Water, Carbon dioxide, Dry chemical, Foam
SPECIAL FIRE FIGHTING PROCEDURES:
Wear full protective clothing, including helmet, self-contained,
positive pressure or pressure demand breathing apparatus, bunker coat
and pants, bands around arms, waist and legs, face mask, and
protective covering for exposed areas of the head.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
None known.
NFPA HAZARD CODES: HEALTH: 1 FIRE: 0 REACTIVITY: 1
UNUSUAL REACTION HAZARD: none
-----------------------------------------------------------------------------
4. REACTIVITY DATA
-----------------------------------------------------------------------------
STABILITY: Stable
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part A)
May 30, 2001 PAGE 3
-----------------------------------------------------------------------------
4. REACTIVITY DATA (continued)
-----------------------------------------------------------------------------
INCOMPATIBILITY - MATERIALS/CONDITIONS TO AVOID:
Strong Oxidizing Agents, Heat. Heat is generated during cure. Do not
cure a mass larger than 50 grams in a confined space to prevent a
premature reaction (exotherm) with production of intense heat and
smoke.
HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.
HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon Monoxide and Carbon Dioxide, Oxides of Nitrogen, Oxides of
Sulfur, Aldehydes, Ketones, Hydrocarbons, Toxic Vapors, Gases or
Particulates.
-----------------------------------------------------------------------------
5. ENVIRONMENTAL INFORMATION
-----------------------------------------------------------------------------
SPILL RESPONSE:
Refer to other sections of this MSDS for information regarding
physical and health hazards, respiratory protection, ventilation, and
personal protective equipment. Cover with absorbent material.
Collect spilled material. Place in a U.S. DOT-approved container.
RECOMMENDED DISPOSAL:
Cure product according to product instructions. Incinerate uncured
waste in an industrial or commercial incinerator. Dispose of
completely cured (or polymerized) material in a sanitary landfill.
ENVIRONMENTAL DATA:
Not determined.
REGULATORY INFORMATION:
Volatile Organic Compounds: 0 gms/liter.
VOC Less H2O & Exempt Solvents: 0 gms/liter.
Since regulations vary, consult applicable regulations or authorities
before disposal. U.S. EPA Hazardous Waste Number = None (Not U.S.
EPA Hazardous).
EPCRA HAZARD CLASS:
FIRE HAZARD: No PRESSURE: No REACTIVITY: No ACUTE: Yes CHRONIC: Yes
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part A)
May 30, 2001 PAGE 4
-----------------------------------------------------------------------------
6. SUGGESTED FIRST AID
-----------------------------------------------------------------------------
EYE CONTACT:
Immediately flush eyes with large amounts of water for at least 15
minutes. Get immediate medical attention.
SKIN CONTACT:
Immediately flush skin with large amounts of water for at least 15
minutes in a chemical safety shower while removing contaminated
clothing and shoes. Get immediate medical attention. Wash
contaminated clothing before reuse.
INHALATION:
If signs/symptoms occur, remove person to fresh air. If
signs/symptoms continue, call a physician.
IF SWALLOWED:
Do not induce vomiting. Drink two glasses of water. Call a physician.
-----------------------------------------------------------------------------
7. PRECAUTIONARY INFORMATION
-----------------------------------------------------------------------------
EYE PROTECTION:
Avoid eye contact. Wear vented goggles. Wear safety glasses with
side shields.
SKIN PROTECTION:
Avoid skin contact. Wear appropriate gloves when handling this
material. A pair of gloves made from the following material(s) are
recommended: polyethylene/ethylene vinyl alcohol.
RECOMMENDED VENTILATION:
Provide appropriate local exhaust for grinding, cutting or sanding
cured material. Curing ovens must be exhausted to outdoors or to a
suitable emission control device. Use in a well-ventilated area. If
exhaust ventilation is not adequate, use appropriate respiratory
protection.
RESPIRATORY PROTECTION:
Avoid breathing of vapors created during the cure cycle. Avoid
breathing of dust created by cutting, sanding or grinding. Select
one of the following NIOSH approved respirators based on airborne
concentration of contaminants and in accordance with OSHA
regulations: half-mask dust respirator.
PREVENTION OF ACCIDENTAL INGESTION:
Do not eat, drink or smoke when using this product. Wash exposed
areas thoroughly with soap and water. Do not ingest.
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part A)
May 30, 2001 PAGE 5
-----------------------------------------------------------------------------
7. PRECAUTIONARY INFORMATION (continued)
-----------------------------------------------------------------------------
RECOMMENDED STORAGE:
Store away from heat. Keep out of the reach of children.
FIRE AND EXPLOSION AVOIDANCE:
Keep container tightly closed.
OTHER PRECAUTIONARY INFORMATION:
Do not cure up a mass of combined material larger than 50 grams to
prevent the possibility of exotherm.
EXPOSURE LIMITS
INGREDIENT VALUE UNIT TYPE AUTH SKIN*
-----------------------------------------------------------------------------
SCOTCH-WELD (TM) DP-100 CLEAR
EPOXY ADHESIVE PART A CONTAINS:.... NONE NONE NONE NONE
MERCAPTAN TERMINATED POLYMER N.J.
TRADE SECRET REGISTRY NO. 679485-
5016P.............................. NONE NONE NONE NONE
2,4,6-TRIS (DIMETHYLAMINO)METHYL
PHENOL............................. 5 PPM TWA CMRG
SCOTCH-WELD (TM) DP-190 GRAY EPOXY
ADHESIVE PART A CONTAINS:.......... NONE NONE NONE NONE
POLYMERIC DIAMINE.................... NONE NONE NONE NONE
KAOLIN............................... 2 MG/M3 TWA ACGIH
RESPIRABLE
KAOLIN............................... 10 MG/M3 TWA OSHAV
AS DUST
OSHA VACATED PEL
KAOLIN............................... 15 MG/M3 TWA OSHA
AS TOTAL DUST
KAOLIN............................... 5 MG/M3 TWA OSHA
RESPIRABLE
CARBON BLACK......................... 3.5 MG/M3 TWA ACGIH
CARBON BLACK......................... 3.5 MG/M3 TWA OSHA
CARBON BLACK......................... 0.5 MG/M3 TWA CMRG
SCOTCH-WELD (TM) DP-420 OFF-WHITE
EPOXY ADHESIVE PART A CONTAINS:.... NONE NONE NONE NONE
GLYCOL AMINE - N.J. TRADE SECRET
(T.S.) REGISTRY #04499600-5019P.... NONE NONE NONE NONE
MODIFIED DIGLYCIDYL ETHER OF
BISPHENOL A - N.J. TRADE SECRET
(T.S.) REGISTRY #04499600-5023P.... NONE NONE NONE NONE
EPOXY RESIN.......................... NONE NONE NONE NONE
AMORPHOUS SILICA..................... 3 MG/M3 TWA CMRG
AS RESPIRABLE DUST
2,4,6-
TRIS((DIMETHYLAMINO)METHYL))PHENOL. 5 PPM TWA CMRG
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part A)
May 30, 2001 PAGE 6
EXPOSURE LIMITS (continued)
INGREDIENT VALUE UNIT TYPE AUTH SKIN*
-----------------------------------------------------------------------------
SULFONIC ACID SALT - N.J. TRADE
SECRET (T.S.) REGISTRY #04499600-
5022P.............................. NONE NONE NONE NONE
* SKIN NOTATION: Listed substances indicated with 'Y' under SKIN refer to
the potential contribution to the overall exposure by the cutaneous route
including mucous membrane and eye, either by airborne or, more particularly,
by direct contact with the substance. Vehicles can alter skin absorption.
SOURCE OF EXPOSURE LIMIT DATA:
- ACGIH: American Conference of Governmental Industrial Hygienists
- CMRG: Chemical Manufacturer Recommended Exposure Guidelines
- OSHA: Occupational Safety and Health Administration
- OSHAV: Occupational Safety and Health Administration Vacated PEL.
Vacated Permissible Exposure Limits (PEL) are enforced as
the OSHA PEL in some states. Check with your local
regulatory authority.
- NONE: None Established
-----------------------------------------------------------------------------
8. HEALTH HAZARD DATA
-----------------------------------------------------------------------------
EYE CONTACT:
Chemical Related Eye Burns (chemical corrosivity): signs/symptoms can
include cloudy appearance of the cornea, chemical burns, pain,
tearing, ulcers, impaired vision or loss of vision.
Vapors from heated material may cause eye irritation.
Dust created by cutting, grinding, sanding, or machining may cause
eye irritation.
SKIN CONTACT:
Allergic Skin Reaction: signs/symptoms can include redness, swelling,
blistering, and itching.
Skin Burns (chemical corrosivity): signs/symptoms can include redness,
swelling, itching, pain, blistering, ulceration, sloughing, and scar
formation.
INHALATION:
Irritation (upper respiratory): signs/symptoms can include soreness
of the nose and throat, coughing and sneezing.
Vapors of heated material may cause respiratory system irritation.
Dust from cutting, grinding, sanding or machining may cause
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: Scotch-Weld (TM) EPX (TM) Applicator and Duo-Pak Adhesives Starter
Pack (Part A)
May 30, 2001 PAGE 7
-----------------------------------------------------------------------------
8. HEALTH HAZARD DATA (continued)
-----------------------------------------------------------------------------
irritation of the respiratory system.
IF SWALLOWED:
Ingestion may cause:
Irritation of Gastrointestinal Tissues: signs/symptoms can
include pain, vomiting, abdominal tenderness, nausea, blood in
vomitus, and blood in feces.
OTHER HEALTH HAZARD INFORMATION:
Exposure to this material in normal storage and handling has not been
reported to cause significant adverse health effects. However, under
normal processing conditions, e.g. grinding or heating, this product
may release fumes and vapors of variable composition based on
specific process conditions. These process releases may produce
irritation or any of the health effects listed above when the
emissions are present at elevated concentrations. Use with
appropriate local exhaust ventilation.
-----------------------------------------------------------------------------
SECTION CHANGE DATES
-----------------------------------------------------------------------------
HEADING SECTION CHANGED SINCE April 23, 2001 ISSUE
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
-----------------------------------------------------------------------------
The information in this Material Safety Data Sheet (MSDS) is believed to
be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. User is responsible for determining
whether the 3M product is fit for a particular purpose and suitable for
user's method of use or application. Given the variety of factors that
can affect the use and application of a 3M product, some of which are
uniquely within the user's knowledge and control, it is essential that
the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers.
Due to the remote possibility that electronic transfer may have resulted
in errors, omissions or alterations in this information, 3M makes no
representations as to its completeness or accuracy. In addition,
information obtained from a database may not be as current as the
information in the MSDS available directly from 3M.
|