Material
Safety
FOR CHEMICAL EMERGENCY SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT
CALL (CHEMTREC) 1-800-424-9300. THIS MSDS COMPLIES WITH 29 CFR
Data Sheet
1919.1200 (THE HAZARD COMMUNICATION STANDARD)
Section 1 - Chemical Product and Company Identification
Distributor Name: Alpha Professional Tools
Product / Chemical Name:
Address: 250 Braen Ave. Wyckoff, NJ 07481
Lubrication Oil for Pneumatic Tools
Emergency Tel. No.: 1-800-648-7229
Chemical Family or Product Type: Pet. Hydrocarbons and Additives.
Product Number: AIR-008 Formula:
Section 2 - Hazardous Ingredients
Determined not to be hazardous
Section 3 - Health Hazard Information
A. Emergency & First Aid Procedures: B. Effects of Over Exposure:
1. Eyes: Flush thoroughly with water. If irritation 1. Eyes: Practically non-irritating. If redness and
occurs, call a physician. irritation persist call a physician.
2. Skin: Wash contact areas with soap and water. 2. Skin: High pressure accidental injection through
3. Inhalation: Remove from further exposure. If the skin requires immediate medical attention for
respiratory irritation, dizziness, nausea or possible incision, irrigation and / or debridement.
unconsciousness occurs, seek immediate medical 3. Inhalation: Material if aspirated into the lungs
assistance and call a physician. If breathing has may cause chemical pneumonitis. Treat
stopped use mouth to mouth resuscitation. appropriately.
4. Ingestion: Not expected to be a problem. Give 4. Ingestion: If over 1/2 pint ingested, immediately
1-2 glasses of water and get medical attention. take 1 to 2 glasses of water and call a physician,
Do not induce vomiting or give anything by mouth hospital emergency room or poison control center
to an unconscious person. for assistance.
Section 4 - Fire & Explosion Hazard Data
A. Flash Point C (F): >182 (360) C. Special Fire Procedures: Water or foam may cause
B. Extinguishing Media: Carbon Dioxide, Foam, Dry frothing. Use water to keep fire exposed containers cool.
Chemical and water fog. Prevent runoff from entering streams, sewers, or drinking
water supply.
D. Unusual Fire & Explosion Hazards: None
Section 5 - Physical Data
A. Boiling Point: >316C (600 F) E. pH - 1% Solution: N/A
B. Freezing Point: N/E F. Solubility in Water: Negligible
C. Vapor Density: >2.0 G. Viscosity @ 40C/100c, cST: 18.5 / 4.1
D. Vapor Pressure - mmHg 20C: <0.1 H. Evaporation Rate: N/E
I. Color & Odor: Light Amber Liquid/Mild
Section 6 - Reactivity Data
Section 6 - Health Hazards
A. Stability: Stable D. Hazardous Polymerization: Will not occur.
B. Conditions To Avoid: Extreme heat. E. Hazardous Decomposition Products: Carbon
C. Incompatibility: Strong oxidizers monoxide
Chemtrec Emergency Phone (800) 424-9300
Doc# 515
Section 7- Spill, Leak & Disposal Procedures
A. Steps to be Taken in Case of Spill: B. Waste Disposal Methods:
1. Absorb on fire retardant treated sawdust, Dispose of according to Federal, State and Local
diatomaceous earth, etc. regulations.
2. Shovel up and dispose of at appropriate waste
disposal facility.
3. Prevent spills from entering storm sewers or
drains and contact with soil.
Section 8 - Special Protection Information
A. Specific Personal Protective Equipment: B. Ventilation Requirements:
1. Respiratory: No special requirements under Local & Mechanical (General Exhausts are
ordinary conditions of use. adequate)
2. Eyes: Normal industrial eye protection practices
should be employed.
3. Skin: No special equipment required. However,
good personal hygiene practices should always
be followed.
Section 9 - Special Precautions
A. Handling: No special precautions are necessary
beyond normal good hygiene practices.
B. Storage: Do not store in open or unlabeled containers.
Store away from strong oxidizing agents or combustible
material.
Section 10 - Transportation Requirements
DOT Proper Shipping Name: Unregulated
DOT UN Code: N/A
DOT Hazard Class: N/A
DOT Packaging Group: N/A
DOT Labels Required: N/A
The information presented herein is based on data considered to be accurate and that reflects the requirements of the OSHA
hazard communication standards in effect as of the date of preparation of this material data safety sheet. However no warranty
or representation, expressed or implied is made as to the accuracy or completeness of the forgoing data and safety informa-
tion. In addition, no responsibility can be assumed by vendors for any damage or injury resulting from abnormal use, from any
failure to adhere to recommended practices, or from any hazards inherent in the nature of the product.
Revised 1999
Doc# 515
|