Page 1/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 05/12/2004 Reviewed on 05/12/2004
1 Identification of substance
路 Product details
路 Trade name: Akepox 2040 Component B
路 Article number: 10611, 10606, 10622
路 Application of the substance / the
preparation Epoxy resin adhesive
路 Manufacturer/Supplier: AKEMI chemisch technische Spezialfabrik GmbH Tel. +49(0)911-642960
Lechstrasse 28 Fax. +49(0)911-644456
D 90451 N眉rnberg e-mail info@akemi.de
路 Information department: Laboratory
2 Composition/Data on components
路 Chemical characterization
路 Description: Mixture of the substances listed below with nonhazardous additions.
路 Dangerous components:
CAS: 2855-13-2 3-aminomethyl-3,5,5-trimethylcyclohexylamine 10-25%
EINECS: 220-666-8
EU Number: 612-067-00-9
CAS: 100-51-6 benzyl alcohol 2.5-10%
EINECS: 202-859-9
EU Number: 603-057-00-5
CAS: 1477-55-0 m-phenylenebis(methylamine) 鈮? 2.5%
EINECS: 216-032-5
CAS: 25154-52-3 nonylphenol 鈮? 2.5%
EINECS: 246-672-0
EU Number: 601-053-00-8
CAS: 108-95-2 phenol 鈮? 2.5%
EINECS: 203-632-7
EU Number: 604-001-00-2
路 Additional information: For the wording of the listed risk phrases refer to section 16.
3 Hazards identification
路 Hazard description: Corrosive
路 Information pertaining to particular
dangers for man and environment: Harmful in contact with skin and if swallowed.
Causes burns.
May cause sensitization by skin contact.
Harmful to aquatic organisms, may cause long-term adverse effects in the
aquatic environment
路 Classification system: The classification was made according to the latest editions of international
substances lists, and expanded upon from company and literature data.
路 NFPA ratings (scale 0 - 4) Health = 2
Fire = 0
Reactivity = 0
路 HMIS-ratings (scale 0 - 4) Health = 2
Fire =0
Reactivity = 0
4 First aid measures
路 General information: Immediately remove any clothing soiled by the product.
路 After inhalation: Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for
transportation.
路 After skin contact: Clean with water and soap. If possible, also wash with polyethylene glycol 400.
(Contd. on page 2)
USA
DR
Page 2/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 05/12/2004 Reviewed on 05/12/2004
Trade name: Akepox 2040 Component B
(Contd. of page 1)
路 After eye contact: Rinse opened eye for several minutes under running water. Then consult a
doctor.
路 After swallowing: Drink copious amounts of water and provide fresh air. Immediately call a doctor.
5 Fire fighting measures
路 Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or
alcohol resistant foam.
路 For safety reasons unsuitable
extinguishing agents: Water with full jet
路 Special hazards caused by the
material, its products of
combustion or resulting gases: Formation of toxic gases is possible during heating or in case of fire.
In case of fire, the following can be released:
Carbon monoxide (CO)
Nitrogen oxides (NOx)
路 Protective equipment: Wear fully protective suit.
Wear self-contained respiatory protective device.
路 Additional information Collect contaminated fire fighting water separately. It must not enter the sewage
system.
Dispose of fire debris and contaminated fire fighting water in accordance with
official regulations.
6 Accidental release measures
路 Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.
路 Measures for environmental
protection: Do not allow to enter sewers/ surface or ground water.
Do not allow to penetrate the ground/soil.
路 Measures for cleaning/collecting: Pick up mechanically.
Use neutralizing agent.
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
7 Handling and storage
路 Handling:
路 Information for safe handling: Ensure good ventilation/exhaustion at the workplace.
路 Information about protection
against explosions and fires: No special measures required.
路 Storage:
路 Requirements to be met by
storerooms and receptacles: Store in a cool location.
路 Information about storage in one
common storage facility: Not required.
路 Further information about storage
conditions: Store in cool, dry conditions in well sealed receptacles.
路 Storage class: 8
8 Exposure controls and personal protection
路 Additional information about
design of technical systems: No further data; see item 7.
(Contd. on page 3)
USA
DR
Page 3/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 05/12/2004 Reviewed on 05/12/2004
Trade name: Akepox 2040 Component B
(Contd. of page 2)
路 Components with limit values that require monitoring at the workplace:
1477-55-0 m-phenylenebis(methylamine)
REL Short-term value: C 0.1 mg/m鲁
Skin
TLV Short-term value: C 0.1 mg/m鲁
Skin
108-95-2 phenol
PEL 19 mg/m鲁, 5 ppm
Skin
REL Short-term value: C 60* mg/m鲁, C 15.6* ppm
Long-term value: 19 mg/m鲁, 5 ppm
*15-min
TLV 19 mg/m鲁, 5 ppm
Skin; BEI
路 Additional information: The lists that were valid during the creation were used as basis.
路 Personal protective equipment:
路 General protective and hygienic
measures: Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Do not inhale gases / fumes / aerosols.
路 Breathing equipment: Not necessary if room is well-ventilated.
路 Protection of hands: Protective gloves
路 Material of gloves Butyl rubber, BR
Nitrile rubber, NBR
Fluorocarbon rubber (Viton)
The selection of the suitable gloves does not only depend on the material, but
also on further marks of quality and varies from manufacturer to manufacturer.
路 Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the
protective gloves and has to be observed.
路 Eye protection: Tightly sealed goggles
路 Body protection: Protective work clothing
9 Physical and chemical properties
路 General Information
Form: Pasty
Structurally viscous
Color: yellowgrey
Odor: Amine-like
路 Change in condition
Melting point/Melting range: Undetermined.
Boiling point/Boiling range: Undetermined.
路 Flash point: > 100掳C (> 212掳F)
路 Ignition temperature: > 350掳C (> 662掳F)
路 Decomposition temperature: > 250掳C (> 482掳F)
路 Auto igniting: Product is not selfigniting.
路 Danger of explosion: Product does not present an explosion hazard.
路 Density at 20掳C (68掳F): ~ 1.7 g/cm鲁
路 Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
(Contd. on page 4)
USA
DR
Page 4/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 05/12/2004 Reviewed on 05/12/2004
Trade name: Akepox 2040 Component B
(Contd. of page 3)
10 Stability and reactivity
路 Thermal decomposition /
conditions to be avoided: No decomposition if used according to specifications.
路 Dangerous reactions Strong exothermic reaction with acids.
路 Dangerous products of
decomposition: Corrosive gases/vapors
11 Toxicological information
路 Acute toxicity:
路 Primary irritant effect:
路 on the skin: Caustic effect on skin and mucous membranes.
路 on the eye: Strong caustic effect.
路 Sensitization: Sensitization possible through skin contact.
路 Additional toxicological
information: The product shows the following dangers according to internally approved
calculation methods for preparations:
Harmful
Corrosive
Irritant
Swallowing will lead to a strong caustic effect on mouth and throat and to the
danger of perforation of esophagus and stomach.
12 Ecological information
路 Ecotoxical effects:
路 Remark: Harmful to fish
路 General notes: Do not allow product to reach ground water, water course or sewage system.
Harmful to aquatic organisms
13 Disposal considerations
路 Product:
路 Recommendation: Must not be disposed of together with household garbage. Do not allow product
to reach sewage system.
路 Uncleaned packagings:
路 Recommendation: Disposal must be made according to official regulations.
Empty contaminated packagings thoroughly. They can be recycled after
thorough and proper cleaning.
14 Transport information
路 DOT regulations:
路 Hazard class: 8
路 Identification number: UN2735
路 Packing group: III
路 Proper shipping name (technical name): Polyamines, liquid, corrosive, n.o.s., contains isophoronediamine, m-
phenylenebis(methylamine)
路 Label 8
路 Land transport ADR/RID (cross-border):
路 ADR/RID class: 8 (C7) Corrosive substances
路 Danger code (Kemler): 80
路 UN-Number: 2735
路 Packaging group: III
路 Description of goods: 2735 POLYAMINES, LIQUID, CORROSIVE, N.O.S.
(ISOPHORONEDIAMINE, m-phenylenebis(methylamine))
(Contd. on page 5)
USA
DR
Page 5/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 05/12/2004 Reviewed on 05/12/2004
Trade name: Akepox 2040 Component B
(Contd. of page 4)
路 Maritime transport IMDG:
路 IMDG Class: 8
路 UN Number: 2735
路 Label 8
路 Packaging group: III
路 EMS Number: F-A,S-B
路 Marine pollutant: No
路 Propper shipping name: Polyamines, liquid, corrosive, n.o.s., contains isophoronediamine, m-
phenylenebis(methylamine)
路 Air transport ICAO-TI and IATA-DGR:
路 ICAO/IATA Class: 8
路 UN/ID Number: 2735
路 Label 8
路 Packaging group: III
路 Propper shipping name: Polyamines, liquid, corrosive, n.o.s., contains isophoronediamine, m-
phenylenebis(methylamine)
15 Regulations
路 Sara
路 Section 355 (extremely hazardous substances):
108-95-2 phenol
路 Section 313 (Specific toxic chemical listings):
108-95-2 phenol
路 TSCA (Toxic Substances Control Act):
All ingredients are listed.
路 Proposition 65
路 Chemicals known to cause cancer:
None of the ingredients is listed.
路 Chemicals known to cause reproductive toxicity:
None of the ingredients is listed.
路 Cancerogenity categories
路 EPA (Environmental Protection Agency)
108-95-2 phenol D
路 IARC (International Agency for Research on Cancer)
108-95-2 phenol 3
路 NTP (National Toxicology Program)
None of the ingredients is listed.
路 TLV (Threshold Limit Value established by ACGIH)
108-95-2 phenol A4
路 MAK (German Maximum Workplace Concentration)
108-95-2 phenol 3
路 NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
路 OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
路 Product related hazard
informations: The product has been classified and marked in accordance with directives on
hazardous materials.
路 Hazard symbols: Corrosive
路 Hazard-determining components
of labelling: 3-aminomethyl-3,5,5-trimethylcyclohexylamine
m-phenylenebis(methylamine)
路 Risk phrases: Harmful in contact with skin and if swallowed.
Causes burns.
May cause sensitization by skin contact.
(Contd. on page 6)
USA
DR
Page 6/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 05/12/2004 Reviewed on 05/12/2004
Trade name: Akepox 2040 Component B
(Contd. of page 5)
Harmful to aquatic organisms, may cause long-term adverse effects in the
aquatic environment
路 Safety phrases: Keep locked up and out of the reach of children.
Avoid contact with skin and eyes.
In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice.
Do not empty into drains, dispose of this material and its container at hazardous
or special waste collection point
Wear suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice immediately.
路 National regulations:
路 Water hazard class: Water hazard class 2 (Self-assessment): hazardous for water.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific
product features and shall not establish a legally valid contractual relationship.
路 Contact: Dieter Zimmermann USA
DR
|