MTL ULTRA DEMUL 300
GENERAL DESCRIPTION TYPICAL PHYSICAL PROPERTIES
MTL Ultra Demul 300 demulsifier contains Specific Gravity .850
the ammonium salt of an alky aryl Flash Point 掳C 11
sulfonate. It is formulated to be a general Freeze Point 掳C -4
purpose batching demulsifier chemical for pH 6-8
problem emulsions encountered in Solubility
production operations, anti-sludge pre Hydrocarbons Soluble
treatment in acid stimulation operations, Water Soluble
and pre treatment of drilling fluids when Mud Filtrate
drilling into oil producing zones. Soluble
This product is designed to rapidly break
stable water in oil emulsions, such as slop HANDLING
oil, over treated oil and dead oil. It also MTL Ultra Demul 300 is a class B2,
can be used as a pre treatment in drilling D1B, D2B controlled product under
fluids to prevent emulsions from occurring the WHMIS system.
at the oil/mud interface while drilling Refer to MSDS information for
horizontal sections in oil wells. specific precautions and handling.
MTL Ultra Demul 300 can also be used
for emulsion block removal in producing AVAILABILITY
wells to remove skin damage. MTL Ultra Demul 300 is available in
18.93L pails or 208L drums from
Millennium Technologies Ltd.
RECOMMENDED USAGE
For pretreatment of drilling fluids, 1-2L/m3
has been found to be very beneficial in
preventing formation skin damage when
added to the drilling mud prior to drilling
into a producing oil section.
For stimulation or emulsion block removal
it is recommended that MTL Ultra Demul
300 be mixed in a hydrocarbon solvent at
the rate of 1.5% and squeezed into the
formation. Best results can be obtained if
the chemical pill is left to sit at the
formation face for 4 to 8 hours.
Modified on January 13, 2005 Printed on April 12, 2006
Millennium Technologies Ltd. believes in good faith that the information presented in this bulletin is accurate and reliable. No other representations
and warranties are given or made in relation to the information or products of whatsoever nature and Millennium Technologies Ltd. assumes no
responsibility for advice or recommendations made herein or any other information disseminated concerning this product. Millennium Technologies
Ltd. will replace or issue credit for the purchase price of any product determined to be defective on delivery. Under no circumstances shall Millennium
Technologies Ltd. or its responsible personnel be liable for any special or consequential damage whatsoever.
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP