This product is a registered biocide under Agriculture Canada's "Pest Control Products Act".
(Registration # 22698). T-352 is a non-ionic, glutaraldehyde-based biocide in a clear liquid
form.
PROPERTIES
Physical Chemical
Appearance: Type: Bactericide
Clear liquid
Specific Gravity: 1.0634 @ 15潞 C Solubility: Soluble (100% in water)
Freeze Point: -6潞 C pH: 3.2
>100% @ (0.1-0.5 L/m3)
Microtox:
APPLICATION
T-352 is effective in controlling both aerobic and anaerobic (sulfate reducing) bacteria. It is
compatible with all water based drilling fluids and can be neutralized prior to disposal (see
below). The recommended treatment is dependent on the severity of the bacterial contamination.
As a pre-treatment, add 0.1-0.5 L/m3 to the mud system and monitor with microbial dip slides.
For already contaminated fluids, add 0.5-2.0 L/m3 treatments until bacterial control is achieved.
Microtox Analysis: A series of microtox tests have determined the following procedure will
deactivate T-352 and should provide a non-toxic response in drilling muds.
1.Increase the pH of the mud to 12.0 and hold for four hours.
2.Neutralize mud back to pH 7.0 with an appropriate acid.
MIXING AND HANDLING
T-352 should be added at a point of low agitation. Do not mix through the hopper or at a point
of high agitation as splashing may occur. T-352 is corrosive and will cause irreversible eye
damage. Wear suitable protection for eyes and skin and ensure there is adequate ventilation in
the mixing area.
WHMIS: See MSDS TDG: Not regulated PACKAGING: 20 liter pail
(Registration #22698 Pest
Control Products Act)
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP