Material Safety Data Sheet
24-Hour Emergency Telephone Numbers
EMERGENCY: CHEMTREC (800) 424-9300 or (703) 527-3887
Emergency Information Centers are located in the U.S.A. International collect calls accepted.
INFORMATION: Star brite (800) 327-8583 (954) 587-6280, Jeff Tieger (800) 327-8583
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION
Prostar Super Premium Synthetic Blend 4 Stroke MultigradeOutboard Oil
Product Number(s): 28132, 28100, 28105, 28155, 28232, 28200, 28205, 28255, 28300, 28332, 28305, 28355
Synonyms: ProStar Super Premium Synthetic Blend 4 Stroke Outboard Oil SAE 10W-30, 10W-40, 25W-40
Company Identification Date: June 18, 2005
Star brite
4041 SW 47 Ave.
Ft. Lauderdale, Fl 33314
United States of America
www.starbrite.com
Product Information
MSDS Requests: (800) 327-8583
email : jeff@starbrite.com
SECTION 2 COMPOSITION/ INFORMATION ON INGREDIENTS
COMPONENTS CAS NUMBER AMOUNT
Highly refined mineral oil (C15 - C50) Mixture 70 - 94.99 %weight
Zinc dialkyldithiophosphate 68649-42-3 1 - 4.99 %weight
SECTION 3 HAZARDS IDENTIFICATION
************************************************************************************************************************
EMERGENCY OVERVIEW
Dark brown liquid.
************************************************************************************************************************
IMMEDIATE HEALTH EFFECTS
Eye: Not expected to cause prolonged or significant eye irritation.
Skin: Contact with the skin is not expected to cause prolonged or significant irritation. Not expected to be harmful to
internal organs if absorbed through the skin.
Ingestion: Not expected to be harmful if swallowed.
Inhalation: Not expected to be harmful if inhaled. Contains a petroleum-based mineral oil. May cause respiratory irritation
or other pulmonary effects following prolonged or repeated inhalation of oil mist at airborne levels above the
recommended mineral oil mist exposure limit. Symptoms of respiratory irritation may include coughing and difficulty
breathing.
SECTION 4 FIRST AID MEASURES
Eye: No specific first aid measures are required. As a precaution, remove contact lenses, if worn, and flush eyes with
water.
Skin: No specific first aid measures are required. As a precaution, remove clothing and shoes if contaminated. To remove
the material from skin, use soap and water. Discard contaminated clothing and shoes or thoroughly clean before reuse.
Ingestion: No specific first aid measures are required. Do not induce vomiting. As a precaution,
get medical advice.
Inhalation: No specific first aid measures are required. If exposed to excessive levels of material in the air, move the
exposed person to fresh air. Get medical attention if coughing or respiratory discomfort occurs.
Prostar Super Premium Synthetic Blend 4 Stroke MultigradeOutboard Oil
Product Number(s): 28132, 28100, 28105, 28155, 28232, 28200, 28205, 28255, 28300, 28332, 28305, 28355
SECTION 5 FIRE FIGHTING MEASURES
FIRE CLASSIFICATION:
OSHA Classification (29 CFR 1910.1200): Not classified by OSHA as flammable or combustible.
NFPA RATINGS: Health: 0 Flammability: 1 Reactivity: 0
FLAMMABLE PROPERTIES:
Flashpoint: (Cleveland Open Cup) 392 掳F (200 掳C) (Min)
Autoignition: NDA
Flammability (Explosive) Limits (% by volume in air): Lower: NA Upper: NA.EXTINGUISHING MEDIA: Use water fog,
foam, dry chemical or carbon dioxide (CO2) to extinguish flames.
PROTECTION OF FIRE FIGHTERS:
Fire Fighting Instructions: This material will burn although it is not easily ignited. For fires involving this material, do not
enter any enclosed or confined fire space without proper protective equipment, including self-contained breathing
apparatus.
Combustion Products: Highly dependent on combustion conditions. A complex mixture of airborne solids, liquids, and
gases including carbon monoxide, carbon dioxide, and unidentified organic compounds will be evolved when this material
undergoes combustion. Combustion may form oxides of: Nitrogen, Phosphorus, Sulfur .
SECTION 6 ACCIDENTAL RELEASE MEASURES
Protective Measures: Eliminate all sources of ignition in vicinity of spilled material.
Spill Management: Stop the source of the release if you can do it without risk. Contain release to prevent further
contamination of soil, surface water or groundwater. Clean up spill as soon as possible, observing precautions in
Exposure Controls/Personal Protection. Use appropriate techniques such as applying non-combustible absorbent
materials or pumping. Where feasible and appropriate, remove contaminated soil. Place contaminated materials in
disposable containers and dispose of in a manner consistent with applicable regulations.
Reporting: Report spills to local authorities and/or the U.S. Coast Guard's National Response Center at (800) 424-8802
as appropriate or required.
SECTION 7 HANDLING AND STORAGE
Precautionary Measures: Keep out of the reach of children.
General Handling Information: Avoid contaminating soil or releasing this material into sewage and drainage systems
and bodies of water.
Static Hazard: Electrostatic charge may accumulate and create a hazardous condition when handling this material. To
minimize this hazard, bonding and grounding may be necessary but may not, by themselves, be sufficient. Review all
operations which have the potential of generating an accumulation of electrostatic charge and/or a flammable atmosphere
(including tank and container filling, splash filling, tank cleaning, sampling, gauging, switch loading, filtering, mixing,
agitation, and vacuum truck operations) and use appropriate mitigating procedures. For more information, refer to OSHA
Standard 29 CFR 1910.106, 'Flammable and Combustible Liquids', National Fire Protection Association (NFPA 77,
'Recommended Practice on Static Electricity', and/or the American Petroleum Institute (API) Recommended Practice
2003, 'Protection Against Ignitions Arising Out of Static, Lightning, and Stray Currents'.
Container Warnings: Container is not designed to contain pressure. Do not use pressure to empty container or it may
rupture with explosive force. Empty containers retain product residue (solid, liquid, and/or vapor) and can be dangerous.
Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static electricity,
or other sources of ignition. They may explode and cause injury or death. Empty containers should be completely
drained, properly closed, and promptly returned to a drum reconditioner or disposed of properly..
SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION
GENERAL CONSIDERATIONS:
Consider the potential hazards of this material (see Section 3), applicable exposure limits, job activities, and other
substances in the work place when designing engineering controls and selecting personal protective equipment. If
engineering controls or work practices are not adequate to prevent exposure to harmful levels of this material, the
personal protective equipment listed below is recommended. The user should read and understand all instructions
and limitations supplied with the equipment since protection is usually provided for a limited time or under certain
circumstances.
Special note: Do not use in breathing air apparatus or medical equipment.
ENGINEERING CONTROLS:
Use in a well-ventilated area.
Prostar Super Premium Synthetic Blend 4 Stroke MultigradeOutboard Oil
Product Number(s): 28132, 28100, 28105, 28155, 28232, 28200, 28205, 28255, 28300, 28332, 28305, 28355
SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION cont鈥檇
PERSONAL PROTECTIVE EQUIPMENT
Eye/Face Protection: No special eye protection is normally required. Where splashing is possible, wear safety glasses
with side shields as a good safety practice.
Skin Protection: No special protective clothing is normally required. Where splashing is possible, select protective
clothing depending on operations conducted, physical requirements and other substances. Suggested materials for
protective gloves include: 4H (PE/EVAL), Nitrile Rubber, Silver Shield, Viton.
Respiratory Protection: No respiratory protection is normally required. If user operations generate an oil mist, determine
if airborne concentrations are below the occupational exposure limit for mineral oil mist. If not, wear an approved
respirator that provides adequate protection from the measured concentrations of this material. For air-purifying
respirators use a particulate cartridge. Use a positive pressure air-supplying respirator in circumstances where air-
purifying respirators may not provide adequate protection.
Occupational Exposure Limits:
Component Limit TWA STEL Ceiling Notation
Highly refined mineral oil (C15 -
C50)
ACGIH_TLV 5 mg/m3 10 mg/m3
Highly refined mineral oil (C15 -
C50)
OSHA_PEL 5 mg/m3
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES.
Attention: the data below are typical values and do not constitute a specification.
Appearance and Odor: Dark brown liquid.
pH: NA
Vapor Pressure: <0.01 mmHg @ 100 掳F
Vapor Density (Air = 1): >1
Boiling Point: >600 掳F (>315 C)
Solubility: Soluble in hydrocarbons; insoluble in water
Freezing Point: NA
Melting Point: NA
Specific Gravity: 0.88 - 0.88 @ 15.6 掳C / 15.6 掳C
Volatile Organic
Compounds (VOC) : 1.1 %weight
Viscosity: 5 cSt - 18 cSt @ 100 掳C (Min)
SECTION 10 STABILITY AND REACTIVITY
Chemical Stability: This material is considered stable under normal ambient and anticipated storage and handling
conditions of temperature and pressure.
Incompatibility With Other Materials: May react with strong oxidizing agents, such as chlorates, nitrates, peroxides, etc.
Hazardous Decomposition Products: Hydrogen Sulfide (Elevated temperatures)
Hazardous Polymerization: Hazardous polymerization will not occur.
SECTION 11 TOXICOLOGICAL INFORMATION
IMMEDIATE HEALTH EFFECTS
Eye Irritation: The eye irritation hazard is based on evaluation of data for similar materials or product components.
Skin Irritation: The skin irritation hazard is based on evaluation of data for similar materials or product components.
Skin Sensitization: No product toxicology data available.
Acute Dermal Toxicity: The acute dermal toxicity hazard is based on evaluation of data for similar materials or product
components.
Acute Oral Toxicity: The acute oral toxicity hazard is based on evaluation of data for similar materials or product
components.
Acute Inhalation Toxicity: The acute inhalation toxicity hazard is based on evaluation of data for similar materials or
product components.
ADDITIONAL TOXICOLOGY INFORMATION:
Prostar Super Premium Synthetic Blend 4 Stroke MultigradeOutboard Oil
Product Number(s): 28132, 28100, 28105, 28155, 28232, 28200, 28205, 28255, 28300, 28332, 28305, 28355
SECTION 11 TOXICOLOGICAL INFORMATION
This product contains petroleum base oils which may be refined by various processes including severe solvent extraction,
severe hydrocracking, or severe hydrotreating. None of the oils requires a cancer warning under the OSHA Hazard
Communication Standard (29 CFR 1910.1200). These oils have not been listed in the National Toxicology Program (NTP)
Annual Report nor have they been classified by the International Agency for Research on Cancer (IARC).as; carcinogenic
to humans (Group 1), probably carcinogenic to humans (Group 2A), or possibly carcinogenic to humans (Group 2B).
During use in engines, contamination of oil with low levels of cancer-causing combustion products
occurs. Used motor oils have been shown to cause skin cancer in mice following repeated application and continuous
exposure. Brief or intermittent skin contact with used motor oil is not expected to have serious effects in humans if the oil
is thoroughly removed by washing with soap and water.
SECTION 12 ECOLOGICAL INFORMATION
ECOTOXICITY
The toxicity of this material to aquatic organisms has not been evaluated. Consequently, this material should be kept out
of sewage and drainage systems and all bodies of water.
ENVIRONMENTAL FATE
This material is not expected to be readily biodegradable.
SECTION 13 DISPOSAL CONSIDERATIONS
Oil collection services are available for used oil recycling or disposal. Place contaminated materials in containers and
dispose of in a manner consistent with applicable regulations. Contact your sales representative or local environmental or
health authorities for approved disposal or recycling methods. (See B.C. Reg. GY/92 Waste Management Act; R.R.O.
1990, Reg. 347 General-Waste Management; C.C.SM.c. W40 The Waste Reduction and Prevention Act; N.S. Reg. 51/95
and N.S. Reg. 179/96 for examples of Provincial legislation.)
SECTION 14 TRANSPORT INFORMATION
Call for information
SECTION 15 REGULATORY INFORMATION
SARA 311/312 CATEGORIES: 1. Immediate (Acute) Health Effects: NO
2. Delayed (Chronic) Health Effects: NO
3. Fire Hazard: NO
4. Sudden Release of Pressure Hazard: NO
5. Reactivity Hazard: NO
REGULATORY LISTS SEARCHED:
4_I1=IARC Group 1 15=SARA Section 313
4_I2A=IARC Group 2A 16=CA Proposition 65
4_I2B=IARC Group 2B 17=MA RTK
05=NTP Carcinogen 18=NJ RTK
06=OSHA Carcinogen 19=DOT Marine Pollutant
09=TSCA 12(b) 20=PA RTK
The following components of this material are found on the regulatory lists indicated.
Zinc dialkyldithiophosphate 15
CERCLA REPORTABLE QUANTITIES(RQ)/SARA 302 THRESHOLD PLANNING
QUANTITIES(TPQ):
Component Component RQ Component TPQ Product RQ
Zinc dialkyldithiophosphate 1 lbs None 22 lbs
Prostar Super Premium Synthetic Blend 4 Stroke MultigradeOutboard Oil
Product Number(s): 28132, 28100, 28105, 28155, 28232, 28200, 28205, 28255, 28300, 28332, 28305, 28355
SECTION 15 REGULATORY INFORMATION cont鈥檇
CHEMICAL INVENTORIES:
CANADA: All the components of this material are on the Canadian DSL or have been notified.under the New Substance
Notification Regulations, but have not yet been published in the Canada Gazette.
PEOPLE'S REPUBLIC OF CHINA: All the components of this product are listed on the draft Inventory of Existing
Chemical Substances in China.
EUROPEAN UNION: All the components of this material are in compliance with the EU Seventh Amendment Directive
92/32/EEC.
JAPAN: All the components of this product are on the Existing & New Chemical Substances (ENCS) inventory in Japan,
or have an exemption from listing.
KOREA: All the components of this product are on the Existing Chemicals List (ECL) in Korea.
PHILIPPINES: All the components of this product are listed on the Philippine Inventory of Chemicals and Chemical
Substances (PICCS).
UNITED STATES: All of the components of this material are on the Toxic Substances Control Act
(TSCA) Chemical Inventory.
NEW JERSEY RTK CLASSIFICATION:
Under the New Jersey Right-to-Know Act L. 1983 Chapter 315 N.J.S.A. 34:5A-1 et. seq., the
product is to be identified as follows:
PETROLEUM OIL (Motor oil)
WHMIS CLASSIFICATION:
This product is not considered a controlled product according to the criteria of the Canadian
Controlled Products Regulations.
SECTION 16 OTHER INFORMATION
NFPA RATINGS: Health: 0 Flammability: 1 Reactivity: 0
HMIS RATINGS: Health: 1 Flammability: 1 Reactivity: 0
(0-Least, 1-Slight, 2-Moderate, 3-High, 4-Extreme, PPE:- Personal Protection Equipment Index
recommendation, *- Chronic Effect Indicator). These values are obtained using the guidelines or
published evaluations prepared by the National Fire Protection Association (NFPA) or the
National Paint and Coating Association (for HMIS ratings).
REVISION STATEMENT: Changes have been made throughout this Material Safety Data
Sheet. Please read the entire document.
ABBREVIATIONS THAT MAY HAVE BEEN USED IN THIS DOCUMENT:
TLV - Threshold Limit Value TWA - Time Weighted Average
STEL - Short-term Exposure Limit PEL - Permissible Exposure Limit
CAS - Chemical Abstract Service Number
NDA - No Data Available NA - Not Applicable.<= - Less Than or Equal To >= - Greater Than or Equal To
Prepared according to the OSHA Hazard Communication Standard (29 CFR 1910.1200) and the
ANSI MSDS Standard (Z400.1).
The above information is based on the data of which we are aware and is believed to be
correct as of the date hereof. Since this information may be applied under conditions
beyond our control and with which we may be unfamiliar and since data made available
subsequent to the date hereof may suggest modifications of the information, we do not
assume any responsibility for the results of its use. This information is furnished upon
condition that the person receiving it shall make his own determination of the suitability of
the material for his particular purpose.
|