____________________________________________________________________
Antifreeze SF Premix
Silicate Free Long-Life Engine Coolant
_____________________________________________________________________________________
Applications
Castrol Antifreeze SF Premix is a ready to use long-life engine coolant based on a monoethylene glycol fluid combined
with special inhibitor additive technology. This technology is also free from Silicates, Amines, Nitrites, Phosphates and
other inorganic inhibitors.
Castrol Antifreeze SF Premix provides outstanding corrosion protection and cooling performance in Engines employing
cast iron and / or aluminium and also in cooling systems with aluminium and / or copper alloys.
_____________________________________________________________________________________
Features / Benefits
- As a diluted product Castrol Antifreeze SF Premix is ready to use without further dilution.
- The long operational life of the product allows extended drain intervals with subsequent reduced costs and less
possibility of harm to the environment.
- The additive technology in the product inhibits build up of calcium deposits from top up with hard water.
- Suitable for use in a wide range of vehicles - ideal for mixed fleet operations.
- Wide operating temperature range for effective engine cooling in all climates
_____________________________________________________________________________________
Specifications / Performance
For optimum performance, Castrol Antifreeze SF Premix Castrol Antifreeze SF Premix meets the requirements of
should not be mixed with other coolants. It is recommended the following OEMs:
that cooling systems should be drained and flushed before
re-filling with Castrol Antifreeze SF Premix. - Audi / VW TL 774 D
- MB Page 325.3
- Ford WSS-M97B44-D
- GM / Opel GM6277M
- MAN Type 324 SNF
- Deutz, MWM, Caterpillar, Cummins
- Saab, Mazda, Renault, Scania
_____________________________________________________________________________________
Storage
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to
avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60掳C,
exposed to hot sun or freezing conditions.
Antifreeze SF Premix
Silicate Free Long-Life Engine Coolant
Health, Safety and Environment
Health, safety and environmental information is provided for this product in the Materials Safety Data Sheet. This gives
details of potential hazards, precautions and First Aid measures, together with environmental effects and disposal of
used products.
Castrol International will not accept liability if the product is used other than in the manner or with the precautions or for
the purpose/s specified. Before the product is used other than as directed, advice should be obtained from the local
Castrol office.
_____________________________________________________________________________________
Typical Characteristics
_____________________________________________________________________________________
Test Method Units Value
_____________________________________________________________________________________
_____________________________________________________________________________________
g/cm3
Relative Density at 15潞C 1.068
ASTM D4052
Appearance Clear /
Visual -
slight haze
Colour Fluorescen
Visual -
t Orange
Reserve Alkalinity 3.0
ASTM D1121 ml 0.1N
HCl
pH 8.4
ASTM D1287 -
Freezing Point -38
ASTM D1177 掳C
Boiling Point 107
ASTM D1120 掳C
Refractive Index @ 20掳C 1.385
ASTM D1218
The above figures are typical of those obtained with normal production tolerance and do not constitute a specification.
This Data Sheet and information it contains is considered to be accurate at the date of printing. No warranty or representation, expressed or implied, is made
as to the accuracy or completeness of the data and information contained in this publication.
It is the User's obligation to evaluate and use products safely and within the scope advised in the data sheet and to comply with all applicable laws and
regulations. No statement made in this publication shall be construed as a permission, recommendation or authorisation given or implied to practice any
patented invention without a valid licence.
The Seller shall not be responsible for any loss or damage resulting from any hazards or risks identified in the data sheet and which are associated with
petroleum products concerned (provided that this disclaimer shall not affect any statutory rights of the Buyer of the petroleum products concerned).
_____________________________________________________________________________________
|