SRG
30/11/2000
Slew Ring Grease
DESCRIPTION
Castrol SRG is an adhesive, extreme pressure open gear lubricant developed as
replacement for the traditional solvent deposited, bitumen based materials.
APPLICATION
Castrol's open gear lubricants are manufactured using more environmentally and
operator friendly materials. They do not dry out in service in the same way as
bitumen based materials, therefore relubrication intervals can be extended and
overall consumption of lubricant is reduced.
Castrol SRG has excellent extreme pressure and anti-wear characteristics,
provides excellent resistance to wash off and gives very good corrosion
protection.
Castrol SRG is a grey/black grease containing solid lubricants to provide added
protection against shock loads.
FEATURES BENEFITS
S S
Excellent adhesion Stays in place
S S
Load carrying and wear Reduce wear and maintenance
protection
S S
Suitable for pneumatic Ease of application & economical due
application systems or to thin and even coat
brush/spatula application
S S
Free of bitumen and solvents More operator friendly
S Excellent corrosion protection
1 of 2
All reasonable care has been taken to ensure that the information contained in this publication is accurate as at the date of printing. It should be
noted however that the information above may be affected by changes occurring subsequent to the date of printing in the blend formulation or
methods of application of any of the products referred to or in the requirements of any specification approval relating to any such products.
SRG
TYPICAL PHYSICAL CHARACTERISTICS
Appearance Grey/black grease
NLGI 0
Worked Penetration 355-385
Four Ball EP Test, kg 330
Four Ball Wear Test, mm (60kg, 1 hour) 0.58
Operating Temperature Range -30潞C to +100潞C
APPLICATION
Open gearing, racks or slides, for application by hand or dip.
Pneumatic dispensing systems are also available, please contact Castrol to
discuss your specific requirements.
2 of 2
Health and Safety information sheets are available for all Castrol products from the address below:
Castrol International, Pipers Way, Swindon, Wiltshire SN3 1RE, England., Telephone:
Enquiries +44 (0)1793 512712, Technical Enquiries +44 (0)118 984 3311, Fax +44 (0)1793
453218
All reasonable care has been taken to ensure that the information contained in this publication is accurate as at the date of printing. It should be
noted however that the information above may be affected by changes occurring subsequent to the date of printing in the blend formulation or
methods of application of any of the products referred to or in the requirements of any specification approval relating to any such products.
|