P R O D U C T I N F O R M A T I O N
CITGO CITGARD庐 600 SINGLE-VISCOSITY
GRADE ENGINE OILS
Date 10/06
DESCRIPTION: CITGO CITGARD 600 Single-Viscosity Grade Engine Oils are high quality, heavy-duty crankcase oils.
This product line is manufactured with the latest additive technologies to provide the highest
performance in four-stroke cycle diesel engines. These mono-grade products meet the performance
requirements of API CF and API SL. SAE 10W and SAE 30 viscosity grades have also passed the
requirements of the Allison C-4 specification. These lower viscosity grade fluids are excellent for
hydraulic applications calling for Allison C-4 and / or Caterpillar TO-2 performance with fluids designed
with engine oil type additive systems.
鈥? Excellent detergency gives maximum control over piston deposits in modern low-emission
PERFORMANCE
four-stroke cycle diesel engines.
BENEFITS:
鈥? Dispersancy and oxidation resistance protect against excessive viscosity increase.
鈥? Superior wear protection of bearings and valve train components even in the presence of high
levels of soot.
鈥? Good TBN properties protect against corrosive wear.
鈥? Proven oil consumption control in heavy duty service.
鈥? Maximum protection of engines and hydraulic systems for those applications where the use
of a single-viscosity grade product is warranted.
PERFORMANCE Allison C-4 JASO DH-1
CAPABILITIES*: Caterpillar Komatsu
Daimler Chrysler 228.2 MAN 270
Detroit Diesel Four-stroke Cycle diesel engines MTU Type 2
*Some performance capabilities are applicable to specific viscosity grade(s).
APPLICATIONS:: CITGARD 600 Single-Viscosity Grade Engine Oils are intended for use in heavy-duty service in
commercial trucks, agricultural equipment, construction equipment, and other diesel-fueled four-stroke
cycle engine, hydraulic, and transmission applications. Specific viscosity grades are approved for use
in power-shift, manual, and hydrostatic transmissions, final drives, and hydraulic systems where the
equipment manufacturer designates the use of a heavy-duty, detergent-type engine oil. See
CITGARD 600 Multi-Viscosity Grade Product Information Sheet for more options. Check Owners鈥?
Manuals for specific viscosity grade and API Service Category recommendations.
C I T G O P e t r o l e u m C o r p o r a t i o n 鈥? 8 0 0 / 2 4 8 - 4 6 8 4 鈥? H o u s t o n , Te x a s 鈥? M a d e i n U S A
C10005A
TYPICAL PROPERTIES:
CITGARD庐 600 SINGLE-VISCOSITY GRADE ENGINE OILS
SAE Grade 10W 30 40 50
Material Code 622610001 622630001 622640001 622650001
Gravity, ASTM D 4052, 掳API 30.5 28.1 27.3 26.8
Pounds Per Gallon 7.3 7.4 7.4 7.5
Flash Point, ASTM D 92 (COC), 掳F(掳C) 421 (216) 471 (244) 475 (246) 493 (256)
Viscosity, ASTM D 445, cSt at 100掳C 6.7 12.0 14.7 19.5
cSt at 40掳C 38.1 100 141 212
Viscosity Index, ASTM D 2270 135 110 103 104
HTHS Rate Vis @ 150掳C & 106 sec-1, cP 2.3 3.6 4.2 5.2
CCS Vis, ASTM D 5293, cP at 掳C 3850 at -25 NR* NR* NR*
MRV Vis, ASTM D 4684, cP at 掳C 12,100 at -30 NR* NR* NR*
MRV Yield Stress, ASTM D 4684, Pa at 掳C <35 at -30 NR* NR* NR*
Pour Point, ASTM D 97, 掳F(掳C) -33 (-36) -11 (-24) +10 (-12) +10 (-12)
Sulfated Ash, ASTM D 874, %m 1.2 1.2 1.2 1.2
TBN (Total Base No.), ASTM D 2896 10 10 10 10
Color, ASTM D 1500 (may vary by location) 3.5 3.5 5.0 5.5
API Service Categories
CF X X X X
CD (obsolete) X X X X
SL X X X
SJ X X X
Approvals or performances that are
Viscosity Grade specific:
Allison C-4 X X
Daimler Chrysler 228.2 X X
JASO DH-1 X X X
Komatsu X X X
MAN 270 X X
MTU Type 2 X X
*NR = No Requirement
|