MATERIAL SAFETY DATA SHEET
MANUFACTURER'S NAME: PRODUCT NAME: Mighty M-V #SB102
Life Automotive Products, Inc. ATF Supplement
ADDRESS: HAZARD MATERIAL ID SYSTEM:
1210 Midas Cove Suite 101 H-1 F-1 R-0 PP-C
Cordova, TN 38018
901-522-8244
EMERGENCY NUMBER: 800-424-9300-CHEMTREC
SECTION 1 - DESCRIPTION
PRODUCT NAME: Smart Blend Synthetic M-V ATF Supplement
DOT SHIPPING NAME: N/A
DOT HAZARD CLASS: Non Hazardous
CAS REGISTRY NUMBER: 68610-60-6
CHEMICAL NAME: Synthetic Additive
PREPARER: Mike Armstrong, 03/03
SECTION 2 - HAZARDOUS INGREDIENTS
COMPONENTS: Polyalphaolefins
Proprietroy Ingredients
SECTION 3 - PHYSICAL DATA
BOILING POINT, DEG F: above 500 VAPOR PRESSURE: negligible
MELTING POINT, DEG F: N/A VAPOR DENSITY: above 5
SPECIFIC GRAVITY: 0.88 SOLUBILITY IN WATER: not soluble
APPEARANCE: Red liquid ODOR: slight
SECTION 4 - FIRE AND EXPLOSION DATA
FLASH POINT, DEG F: above 260oF
EXTINGUISHING MEDIUM: water fog, foam, dry chemical, carbon dioxide
SPECIAL FIRE FIGHTING PROCEDURES: Use water spray to cool exposed containers
Fire fighting personnel should use respiratory protection.
UNUSUAL FIRE EXPLOSION HAZARDS: product of combustion includes fumes & CO2
SECTION 5 - REACTIVITY HAZARDS
STABILITY: stable MATERIAL TO AVOID: strong oxidizers,
strong acids & bases
HAZARDOUS POLYMERIZATION: will not CONDITION TO AVOID: open flame &
extreme heat
HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of Carbon, Nitrogen & Sulfur,
& Phosphorus, Methacrylate Monomers. Under certain conditions,
Ammonia & Hydrogen Sulfide.
SECTION 6 - HEALTH HAZARD INFORMATION
ROUTE OF ENTRY: X INHALATION X SKIN X INGESTION
Acute/Chronic Overexposure:
Eyes: Components of this product have been determined to be irritating and
corrosive to eyes.
Skin: Components of this product have been determined to be irritating and
corrosive to skin.
Inhalation: Breathing mists and vapors may cause slight respiratory tract
irritation. Breathing vapors from product when heated to temperatures
above 150oF which then may contain Hydrogen Sulfide, can also cause headaches,
dizziness, nausea, coughing, bronchial irritation and dryness,
and in sufficient quantities, unconsciousness.
Ingestion: Minor components (<5%) of this product have been determined to
be mildly to moderately toxic (LD50: <1/5g/kg).
Signs and Symptoms of Overexposure:
Eyes: May cause irritation and damage if not treated immediately.
Skin: Prolonged or repeated contact may cause irritation as indicated by
redness, swelling, blistering and dermititis.
Inhalation: Breathing mists and vapors may cause slight respiratory tract
irritation. Breathing vapors when heated to temperatures above 150oF which
may then contain Hydrogen Sulfide, can also cause headaches, dizziness,
nausea, coughing, bronchial irritation and dryness, and in sufficient
quantities, unconsciousness.
Ingestion: Oral exposure may result in nausea, vomiting and diarrhea along
with irritation of the mouth and throat.
None of the ingredients are listed as carcinogens.
Threshold Limit Value (TLV): This product does not contain any components
which have recognized exposure limits. However a TLV of 5.0 mg/cubic meter
for oil mist.
Emergency and First Aid Procedures:
Eyes: DO NOT RUB EYES. Immediately wash eyes with large amounts of
water for at least 15 minutes. Remove contact lenses before washing. Seek
medical attention immediately.
Skin: Remove material from skin by patting or blotting with a clean cloth.
Wash exposed areas with soap and water for at least 15 minutes. Seek
medical attention immediately. Do not reuse contaminated clothing until
laundered. Discard all contaminated leather goods.
Inhalation: If symptoms of Hydrogen Sulfide exposure are indicated, remove
individual(s) to fresh air and administer oxygen. Seek medical attention
immediately.
Ingestion: DO NOT INDUCE VOMITING. If vomiting occurs spontaneously,
watch for signs of aspiration. Seek medical attention immediately.
SECTION 7 - SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION: normally not required with adequate ventilation;
if exposure exceeds limits, use NIOSH/MSHA approved air respirator
VENTILATION: if mists are present, provide adequate ventilation to control
level below the Permissible Exposure Limit
PROTECTIVE GLOVES: impermeable gloves EYE PROTECTION: goggles
OTHER: none usually required
SECTION 8 - SPECIAL PRECAUTIONS AND SPILL/LEAK PROCEDURES
HANDLING & STORAGE PRECAUTIONS: Keep away from fire, flame & sparks
OTHER PRECAUTIONS: never wear oil soaked clothing; discard oil soaked shoes;
affix proper warning labels on containers according to 29 CFR 1010.1200
IN CASE OF SPILLS: no unusual hazard; use pump and/or oil absorbent; keep
from entering waterways and sewers
WASTE DISPOSAL METHODS: dispose according to current local, state and
federal regulations; consider recycling; NOTE: material may become a
hazardous waste through use
NOTE: The above information is based on data of which we are aware and
is believed to be correct. However, no warranty is expressed or implied
regarding the accuracy of this data or the results to be obtained from the
use thereof. Seller assumes no responsibility for injury to vendee
or third persons proximately caused by the material if reasonable
safety procedures are not adhered to as stipulated in the data
sheet. Additionally, we assume no responsibility for injury to vendee or
third persons proximately caused by abnormal use of the material even if
reasonable safety procedures are followed. Furthermore, vendee assumes the
risk in his use of the material.
|