Monday, October 10, 2005
MSDS - Material Safety Data Sheet
Product Name: MIGHTY DIESEL FUEL INJECTOR CLEANER
Part Number: SB303
MSDS No.: 17014
I. Basic Information:
Manufacturer: LIFE AUTOMOTIVE PRODUCTS INC.
Address: 1210 MIDAS COVE, SUITE 101
City, ST Zip: CORDOVA, TN 38018
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact:
Information Telephone Number: 2 Health
2 Flammability
0 Reactivity
Last Update: 10/07/2005
X H Per. Protection
Chemical State: Liquid Gas Solid
X
Chemical Type: Pure Mixture
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
CAS No. Chemical Name % Range NTP SUB Z PEL TLV Limits
95636 1,2,4-Trimethylbenzene < 0.5 X N/E 25 ppm
91203 Naphthalene 0.10 - 1.0 X 10 ppm 10 ppm 10 ppm
68476346 Petroleum distillate, Aliphatic 60.0 - 100.0 N/E 100 ppm N/E
64742945 Petroleum naphtha 1.0 - 5.0 X N/E N/E 100 ppm
25551137 Trimethyl benzene 0.10 - 1.0 25 ppm (TW 25 ppm (TW NJ, PA
III. Hazardous Identification:
Hazard Category:
X Acute X Chronic X Fire Pressure Reactive
Hazardous Identification Information:
Danger: Combustible. Harmful or Fatal if Swallowed. Eye and Skin Irritant..
IV. First Aid Measures:
Route(s) of Entry:
Absorption, Eye, Inhalation, and Ingestion.
Health Hazards (Acute and Chronic):
May cause chronic health effects, See signs and symptoms below
Signs and Symptoms:
Eye Contact: Irritant. Prolonged contact may cause conjunctivitis.
Skin Contact: Irritant. Defatting of tissue, dermatitis may occur.
Inhalation: Irritant to mucous membranes. Repeated exposure may cause narcosis and central nervous system effects such as
visual impairment, difficulty breathing, and convulsions..
Ingestion: HARMFUL OR FATAL IF SWALLOWED. May cause irritation of the gastrointestinal lining, nausea, vomiting,
1
Monday, October 10, 2005
MSDS - Material Safety Data Sheet
Product Name: MIGHTY DIESEL FUEL INJECTOR CLEANER
Part Number: SB303
MSDS No.: 17014
diarrhea, and abdominal pain. May cause central nervous system depression..
Medical Conditions Generally Aggravated by Exposure:
None Known
Emergency and First Aid Procedures:
Eye Contact: Flush eyes with clean water for 15 minutes while lifting eyelids. Get prompt medical attention.
Skin Contact: Wash with soap and water thoroughly. If adverse effects persist, get prompt medical attention. Launder
contaminated clothing before reuse.
Inhalation: Remove to fresh air. If breathing becomes difficult get prompt medical attention.
Ingestion: DO NOT INDUCE VOMITING! Call Poison Control Center, physician, or hospital emergency room immediately.
Other Health Warnings:
`Vomiting and subsequent aspiration into the lungs may lead to chemical pneumonia and pulmonary edema which is a potentially
fatal condition.
V. Fire Fighting Measures:
Flash Point: 140掳F Lower Explosive Limit: N/D Upper Explosive Limit: N/D
F.P. Method: TCC
Fire Extinguishing Media: Water Fog, Foam, Carbon Dioxide, Dry Chemical
Special Fire Fighting Procedures:
Wear self-contained positive pressure breathing apparatus and protective clothes. Cool containers with a water fog. Do not use
forced water stream as this could cause the fire to spread.
Unusual Fire and Explosion:
Toxic fumes, gases or vapors may evolve on burning. Vapors may be havier that air and may travel along the ground to a distant
ignition source and flash back.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Eliminate all ignition sources. Persons not wearing protective equipment should be excluded from area of spill until clean-up has
been completed. Dike or contain spill and absorb with inert materials (sand, sawdust, absorbent sweeping compounds, rags, etc).
Using a non-metalic scoop, place contaminated material into an approved chemical waste container. Where possible, vacuum spilled
liquid using an explosion proof vacuum to recover material. Prevent run-off to sewers, streams, or other bodies of water. If run-off
occurs, notify proper authorities as required that a spill has occured.
VII. Handling and Storage:
Precautions to be Taken:
Handling: Use with adequate ventilation and proper protective equipment. Wash throughly after handling.
Storage: Store in cool, dry area, away from oxidizing agents and sources of ignition. Keep containers closed when not in use.
Other Precautions:
Contact lenses may cause further damage in case of splash into eye. KEEP AWAY FROM CHILDREN AND ANIMALS!
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
S
ee Section 2 for applicable exposure limits. Maintain adequate ventilation.
Avoid breathing vapors. In restricted areas, use approved chemical/mechanical filters designed to remove a combination of
particles and vapor. In confined areas, use approved air line type respirator or hood. A self-contained breathing apparatus is
required for vapor concentrations above TLV limits.
2
Monday, October 10, 2005
MSDS - Material Safety Data Sheet
Product Name: MIGHTY DIESEL FUEL INJECTOR CLEANER
Part Number: SB303
MSDS No.: 17014
Personal Protective Equipment:
See Section 2 for applicable exposure limits. For prolonged exposure wear protective safety glasses, gloves, and apron.
IX. Physical and Chemical Properties:
Boiling Point: >300掳F Melting Point: N/A
Evaporation Rate (Butyl Acetate = 1): N/D Vapor Pressure (mm Hg.): N/D
Specific Gravity (H20 = 1): 0.86000 Vapor Density (AIR = 1): N/D
Solubility In Water: Slight Appearance and Odor: Clear red liquid with petroleum odor
Other Information: N/D
X. Stability and Reactivity:
Stability:
Material is normally stable at moderately elevated temperatures and pressures.
Incompatibility (Materials to Avoid):
Strong oxidizing agents
Decomposition/By Products:
Smoke, carbon monoxide, carbon dioxide, aldehydes and other products of incomplete combustion.
Hazardous Polymerization:
Will not occur
XI. Toxicological Information:
N/D
XII. Ecological Information:
N/D
XIII. Disposal Considerations:
DISPOSAL: This container may be recycled in a recycling centers when empty. Before offering for recycling, empty the can or bottle
by using the product according to the label. If recycling is not available, wrap the container and discard in the trash. Dispose of
unused product in accordance with all local, state government and federal laws and regulations
XIV. Transport Information:
US. Department of Transportation (DOT)
Non-Bulk: Not Regulated
XV. Regulatory Information:
See Section 2 for SARA Reportable Chemicals.
USA TSCA: All components of this material are listed on the US TSCA Inventory.
This fuel additive is registered in the United States
3
Monday, October 10, 2005
MSDS - Material Safety Data Sheet
Product Name: MIGHTY DIESEL FUEL INJECTOR CLEANER
Part Number: SB303
MSDS No.: 17014
Warning: This product contains a chemical known to the State of California to cause cancer or birth defects or other reproductive
harm.
Pennsylvania RTK
Naphthalene CAS# 91-20-3
Trimethylbenzene CAS# 25551-13-7
New Jersey RTK
Naphthalene CAS# 91-20-3
Trimethylbenzene CAS# 25551-13-7
XVI. Other Information:
D
o not used in confined area without proper ventilation. Contact lenses may cause further damage in case of splash into
eye. KEEP AWAY FROM CHILDREN AND ANIMALS!
N/E: Not Established
N/D: Not Determined
N/A: Not Applicable
N/AV: Not Available
While Life Automotive Products Inc. believes this data is accurate as of the revision date, we make no warranty with respect to the
data and we expressly disclaim all liability for reliance thereon. The data is offered soley for information, investigation, and
verification. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or
disposal of this product which may not be covered by this MSDS. The user is repsonsible for full compliance.
4
|