MATERIAL SAFETY DATA SHEET
MSDS 6700
Mighty Part # SB108
MANUFACTURER鈥橲 NAME PRODUCT NAME: ATF Converter - Mercon VI
Life Automotive Products, Inc. HAZARD MATERIAL ID SYSTEM: H-1 F-1 R-0 PP-B
1210 Midas Cove #101
Cordova TN 38018
SECTION 1 鈥? DESCRIPTION
PRODUCT NAME: Smart Blend ATF D-VI Supplement
DOT SHIPPING NAME: N/A
DOT HAZARD CLASS: None Hazardous
CAS REGISTRY NUMBER:
CHEMICAL NAME: Synthetic/Hydrocarbon Blend
PREPARER: Mike Armstrong 10/06
SECTION 2- HAZARDOUS INGREDIENTS
COMPONENTS: A. < 35 61791-24-0, Ethoxylated Alkyl Amines
B. < .1% Confidential Accession # 53259 Proprietary Additive
C. < 10% NJT 003066009-5156P Zinc Alkenyl Carboxamide
D. < 2% 64741-88-4 Mineral Oil
E. < 5% 64742-53-6 Mineral Oil
F. 30-50% 68649-11-6 1-Decene, Dimer Hydrogenated
SECTION 3 PHYSICAL DATA
BOILING POINT DEG F: above 500 VAPOR PRESSURE: negligible
MELTING POINT DEG F: N/A VAPOR DENSITY: above 5
SPECIFIC GRAVITY: 0:88 SOLUBILITY IN WATER: not soluble
APPEARANCE: Red liquid ODOR: slight
SECTION 4 鈥? FIRE AND EXPLOSION DATA
FLASH POINT, DEG F: above 260掳 F
EXTINGUISHING MEDIUM: water fog, foam dry chemical, carbon dioxide
SPECIAL FIRE FIGHTING PROCEDURES: Use water spray to cool exposed containers. Fire fighting personnel
should use respiratory protection.
UNUSUAL FIRE EXPLOSION HAZARDS: product of combustion includes fumes & CO2
SECTION 5 鈥? REACTIVITY HAZARDS
STABILITY: stable MATERIAL TO AVOID: strong oxidizers
Strong acids & bases
HAZARDOUS POLYMERIZATION: will not CONDITION TO AVOID: open flame & extreme
Heat
HAZARDOUS DECOMPOSITON PRODUCTS: Oxides of Carbon, Nitrogen & Zinc, Sulfur & Phosphorus,
Methacrylate Monomers. Under certain conditions, Ammonia & Hydrogen Sulfide.
SECTION 6 鈥? HAZARD INFORMATION
ROUTE OF ENTRY: X INHALATION X SKIN X INGESTION
Acute/Chronic Overexposure
Eyes: May be slightly irritating
Skin: Based on testing of similar materials, may be slightly irritating .
Inhalation:
This product may be irritating to the upper respiratory tract, but based on testing of similar materials at ambient
temperatures, this product is not considered to be a toxic inhalation hazard.
Ingestion: Based on testing of similar materials, minor components (<.5%) of this product have an oral toxicity of >
2 g/kg and is not considered to be toxic to internal organs.
Signs and Symptoms of Overexposure:
Respiratory irritation; dizziness; nausea; loss of consciousness
Other Health Warnings: None noted
Emergency and First Aid Procedures:
Eyes: DO NOT RUB EYES. Immediately wash eyes with large amounts of water for at least 15 minutes.
Remove contact lenses before washing. If irritation occurs, call a physician.
Skin: Remove material from skin by patting pr blotting with a clean cloth. Wash exposed areas with soap and water
for at least 15 minutes. Do not reuse contaminated clothing until laundered. Discard all contaminated leather
goods. If irritation persists, call a physician.
Inhalation: Overexposure by inhalation is unlikely, but should it occur, remove individual to fresh air and
administer oxygen, if properly trained.
Ingestion: DO NOT INDUCE VOMITING. If vomiting occurs spontaneously, watch for signs of aspiration. Seek
medical attention immediately.
SECTION 7 - SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION: normally not required with adequate ventilation; if exposure exceeds limits, use
NIOSH/OSHA air respirator.
VENTILATION: is mists are present, provide adequate ventilation to control level below the Permissable
Exposure Limit.
PROTECTIVE GLOVES: impermeable gloves EYE PROTECTION: goggles
OTHER: none usually required
SECTION 8 鈥? SPECIAL PRECAUTIONS AND SPILL/LEAK PROCEDURES
HANDLING & STORAGE PRECAUTIONS: Keep away from fire, flame & sparks.
OTHER PRECAUTIONS: never wear oil soaked clothing: discard oil soaked shoes.
IN CASE OF SPILLS: no unusual hazard; use pump and/or oil absorbent: keep from entering waterways and
sewers.
WASTE DISPOSAL METHODS: dispose according to current local, state and Federal regulations; consider
recycling; NOTE: material may become a hazardous waste through use.
NOTE: The above information is based on data of which we are aware and is believed to be correct. However, no
warranty is expressed or implied regarding the accuracy of this data or the results to be obtained from the use
thereof. Life Automotive Products, Inc. assumes no responsibility for injury to vendee or third persons proximately
caused by the material if reasonable safety procedures are not adhered to as stipulated in the datasheet.
Additionally, we assume no responsibility for injury to vendee or third persons proximately caused by abnormal use
of the material even if reasonable safety procedures are followed. Furthermore, vendee assumes the risk in his use
of the materials.
|