SCREEN PRINTING INKS MSDS GUIDE
The following plastisol products are covered by Material Safety Data Sheet MSDS8:
10LF 154LF 310LF 732LF 907LF 1173LF 7414LF 7714PF
12HPLF 155LF 313LF 733LF 908LF 1176LF 7416LF 7716PF
13LF 156LF 316LF 734LF 909LF 1182LF 7418LF 7718PF
16LF 157LF 531LF 735LF 910LF 1184LF 7420LF 7720PF
22LF 158LF 532LF 736LF 911LF 1199LF 7422LF 7722PF
24LF 159LF 537LF 737LF 912LF 1500LF 7424LF 7724PF
25LF 160LF 538LF 738LF 913LF 3801LF 7426LF 7726PF
26LF 161LF 539LF 739LF 914LF 3805LF 7428LF 7728PF
35LF 162LF 546LF 740LF 915LF 3806LF 7503LF 7802LF
37LF 163LF 562LF 741LF 916LF 3807LF 7505LF 7804LF
44LF 164LF 566LF 742LF 917LF 3808LF 7507LF 7812LF
46LF 165LF 572LF 743LF 920LF 3809LF 7509LF 7816LF
52LF 166LF 600LF 745LF 926LF 5201LF 7511LF 7820LF
56LF 167LF 606LF 746LF 931LF 5202LF 7513LF 7822LF
60LF 168LF 608LF 756LF 932LF 5204LF 7515LF 7824LF
62LF 169LF 613LF 762LF 933LF 5206LF 7517LF 9201LF
63LF 170LF 616LF 764LF 935LF 5208LF 7519LF 9202LF
65LF 171LF 622LF 765LF 937LF 5210LF 7521LF 9204LF
66LF 199LF 626LF 766LF 938LF 5212LF 7523LF 9206LF
68LF 220LF 631LF 768LF 939LF 5214LF 7525LF 9208LF
69LF 222LF 632LF 769LF 952LF 5216LF 7527LF 9210LF
71LF 251LF 633LF 771LF 955LF 5218LF 7529LF 9212LF
73LF 252LF 634LF 772LF 956LF 5220LF 7531LF 9214LF
76LF 254LF 635LF 773LF 957LF 5222LF 7533LF 9216LF
83LF 256LF 636LF 774LF 966LF 5224LF 7535LF 9218LF
84LF 258LF 637LF 775LF 969LF 5226LF 7536LF 9220LF
86LF 260LF 638LF 788LF 976LF 5228LF 7538LF 9222LF
89LF 262LF 646LF 791LF 1095LF 7000LF 7602LF 9224LF
92LF 264LF 656LF 792LF 1096LF 7031LF 7604LF 9226LF
96LF 266LF 666LF 793LF 1099LF 7033LF 7606LF 9228LF
106LF 268LF 668LF 794LF 1106LF 7034LF 7608LF 11201LF
108LF 270LF 672LF 796LF 1110LF 7037LF 7610LF 11202LF
109LF 272LF 688LF 797LF 1112LF 7201LF 7612LF 11204LF
111LF 274LF 706LF 820LF 1113LF 7202LF 7614LF 11206LF
112LF 276LF 710LF 842LF 1116LF 7204LF 7616LF 11208LF
131LF 278LF 711LF 843LF 1127LF 7206LF 7618LF 11210LF
133LF 310LF 712LF 844LF 1136LF 7208LF 7620LF 11212LF
135LF 313LF 713LF 845LF 1138LF 7210LF 7622LF 11214LF
137LF 316LF 714LF 846LF 1143LF 7212LF 7624LF 11216LF
138LF 326LF 715LF 847LF 1146LF 7214LF 7626LF 11218LF
140LF 331LF 716LF 848LF 1153LF 7216LF 7628LF 11220LF
141LF 346LF 717LF 849LF 1156LF 7218LF 7630LF 11222LF
142LF 366LF 718LF 851LF 1160LF 7401LF 7701PF 11224LF
143LF 372LF 720LF 901LF 1164LF 7402LF 7702PF 11226LF
144LF 388LF 723LF 902LF 1166LF 7404LF 7704PF 11228LF
150LF 500LF 724LF 903LF 1168LF 7406LF 7706PF
151LF 506LF 727LF 904LF 1169LF 7408LF 7708PF
152LF 510LF 730LF 905LF 1170LF 7410LF 7710PF
153LF 513LF 731LF 906LF 1172LF 7412LF 7712PF
REV-042505
MATERIAL SAFETY DATA SHEET
Page:1
PRODUCT NAME : SCREEN PRINTING INKS
: MSDS8
MSDS CODE
: Polyvinyl Chloride Plastisol
CHEMICAL NAME HMIS CODES: H * F R P
1 10 B
SECTION 1 - PRODUCT AND MANUFACTURE IDENTIFICATION
Common names : Polyvinyl Chloride Plastisol Silk Screen Inks
Manufacturer's name : International Coatings Company, Inc.
Address : 13929 East 166th Street Cerritos, CA 90702-7666
Emergency phone : (800) 255-3924 Name of preparer : A. Nucup
Business phone : (562) 926-1010 Date prepared : 03/21/05
Supersedes dated : 04/28/99 Date printed : 03/21/05
SECTION II - HAZARDOUS INGREDIENTS I SARA Ill INFORMATION
Vapor pressure Weight
Ingredients ACGIH (TLV) OSHA (PEL) CAS Number mm Hg @ Temp Percent
<0.05ppm
Vinyl Chloride Monomer (vcm) 5 ppm I ppm 75-01-4
This product, as would any other compound made of PVC resins may possibly contain trace amounts of Vinyl Chloride
Monomer (VCM) a chemical known to the State of California to cause cancer. This statement is included as required
by Proposition 65 of the State of California.
SECTION III - PHYSICAL I CHEMICAL CHARACTERISTICS
: >420掳F @5mmhg SPECIFIC GRAVITY (H20=1)
BOILING RANGE :1.35 -1.65
: >1
VAPOR DENSITY (Air=1) EVAPORATION RATE (Ether=1) :<1
: <0.1 lb/gallon : <1
COATING V.O.C. VOLATILE (% by volume)
SOLUBILITY IN WATER : Insoluble
APPEARANCE AND ODOR : Smooth thick liquid, faint odor.
The VOC content of this material is <0.1 lb/gallon.
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT : >4000F METHOD USED : C.O.C.
FLAMMABLE LIMITS IN AIR BY VOLUME - LOWER : Not Determined Upper: Not Determined
EXTINGUISHING MEDIA: Water spray, foam, carbon dioxide, dry chemical.
SPECIAL FIREFIGHTING PROCEDURES: Self contained breathing apparatus must be worn while fighting chemical
fires.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Irritating toxic fumes, carbon dioxide and carbon monoxide may form
at high temperatures.
SECTION V - REACTIVITY DATA
STABILITY : Stable
CONDITIONS TO AVOID : Exposure to heat and humidity.
INCOMPATIBILITY (MATERIALS TO AVOID) : Alkaline materials, strong acids and oxidizing materials.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS : Carbon monoxide, Carbon dioxide, Hydrogen chloride.
HAZARDOUS POLYMERIZATION: Will not occur.
SECTION VI- HEALTH HAZARD DATA
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
Inhaled: May cause irritation of the upper respiratory tract.
MATERIAL SAFETY DATA SHEET
Page:2
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
May irritate and burn the eyes, may cause skin dermatitis.
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: None known.
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: May cause nausea, diarrhea and gastrointestinal
disturbances.
HEALTH HAZARDS (ACUTE AND CHRONIC):
Acute : May cause irritation of the eyes, upper respiratory tract, mucous membranes and skin.
Chronic : May cause irritation of the eyes, upper respiratory tract, mucous membranes and skin.
CARCINOGENICITY: Yes NTP CARCINOGEN: Yes IARC MONOGRAPHS: Yes OSHA REGULATED: Yes
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: Preexisting skin conditions.
EMERGENCY AND FIRST AID PROCEDURES:
Eye contact : Flush with water for 15 minutes. If irritation persists, seek medical attention.
Skin contact : Wash with soap and water.
Inhaled : Remove to fresh air.
Swallowed : If conscious induce vomiting. Consult a physician.
SECTION VII- SPILL OR LEAK AND DISPOSOL PROCEDURES
SPILL RESPONSE PROCEDURES (Include employee protection measures):
Contain spill with vermiculite or other absorbent material.
PREPARING WASTES FOR DISPOSAL (Container types, neutralization, etc.):
Transfer to disposal drum. This product is not classified as hazardous waste.
Note: Dispose of all wastes in accordance with Federal, State, Local regulations.
SECTION VIII - SPECIAL PROTECTION INFORMATION
VENTILATION AND ENGINEERING CONTROLS:
Good mechanical ventilation should be provided in the workplace.
RESPIRATORY PROTECTION: None required.
EYE PROTECTION (Type): Splash proof glasses recommended.
GLOVES (Specify material): Neoprene type chemical resistant gloves recommended.
OTHER CLOTHING AND EQUIPMENT: None required.
WORK PRACTICES, HYGIENIC PRACTICES:
Avoid excessive contact with skin. Wash hands with soap and water after contact before eating, drinking or
smoking.
OTHER HANDLING AND STORAGE REQUIREMENTS:
Store in cool dry place. Elevated temperatures thicken product and shorten useful life.
PROTECTIVE MEASURES DURING MAINTENANCE OF CONTAMINATED EQUIPMENT:
Use impervious gloves for clean up.
SECTION IX - SPECIAL PRECAUTIONS
LABELING (Precautionary statements):
None
D. O. T. Label:
Not regulated.
International Coatings Co., Inc. believes to the best of its knowledge that the information provided herein, is
factual and the recommendations made are accurate as of the date shown. However, no representation or warranty is
made as to their completeness or accuracy.
|