SAFETY DATA SHEET
TRIM & BUMPER SHINE - SWARFEGA PRO VALET Page 1
Issued: 22/06/2007
Revision No: 1
1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING
Product name: TRIM & BUMPER SHINE - SWARFEGA PRO VALET
SPC500TBS
Product code:
Use / description of product: Aerosol. Dash & Trim Cleaner
Company name: DEB Ltd
108 Spencer Road
Belper
Derbyshire
DE56 1JX
Tel: 01773 596700
Fax: 01773 820482
2. COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous ingredients: BUTANE 10-30%
EINECS: 203-448-7 CAS: 106-97-8
[F+] R12
鈥? ISOBUTANE 1-10%
EINECS: 200-857-2 CAS: 75-28-5
[F+] R12
鈥? LOW BOILING POINT HYDROGEN TREATED NAPHTHA - NAPHTHA (PETROLEUM),
HYDROTREATED LIGHT 30-50%
EINECS: 265-151-9 CAS: 64742-49-0
[F+] R12; [Xi] R38; [N] R51/53; [Xn] R65
鈥? PROPANE 10-30%
EINECS: 200-827-9 CAS: 74-98-6
[F+] R12
3. HAZARDS IDENTIFICATION
Main hazards: Extremely flammable. Irritating to skin. Toxic to aquatic organisms, may cause long-term adverse
effects in the aquatic environment. Vapours may cause drowsiness and dizziness.
Other hazards: Spraying in a horizontal or inverted position may release butane propellant.Deliberate inhalation
abuse could be fatal in extreme cases. Cans may rupture if heated to excess.
4. FIRST AID MEASURES (SYMPTOMS)
Skin contact: There may be mild irritation at the site of contact.
Eye contact: There may be irritation and redness.
Ingestion: Ingestion of large amounts may cause irritation with diarrhoea and vomiting.
Inhalation: Inhalation of large quantities of fumes or vapour may cause irritation, nausea or drowsiness.
Direct inhalation may cause death in extreme cases.
[cont...]
Issued: 22/06/2007 SAFETY DATA SHEET
TRIM & BUMPER SHINE - SWARFEGA PRO VALET Page 2
4. FIRST AID MEASURES (ACTION)
Skin contact: Wash immediately with plenty of soap and water.
Eye contact: Wash immediately with clean water for at least 10 minutes, while lifting eye lids. If any soreness
or irritation persists seek medical advice.
Ingestion: Wash out mouth with water. Give about 1/2 pint of liquid to drink. Obtain immediate medical
advice. DO NOT INDUCE VOMITING DUE TO THE DANGER OF ASPIRATION.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration.
5. FIRE-FIGHTING MEASURES
Extinguishing media: Dry chemical powder.
Exposure hazards: Extremely flammable.
Protect containers from heat by cooling with water spray.
Protection of fire-fighters:
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Refer to section 8 of SDS for personal protection details.
Environmental precautions: If container is ruptured, extinguish all sources of ignition. Ventilate area, particulaly at low level.
Clean-up procedures: Absorb into dry earth or sand.
7. HANDLING AND STORAGE
Handling requirements: Avoid inhalation of high concentrations of mist.
Storage conditions: Store in cool, well ventilated area. Keep away from direct sunlight. Store at a temperature below
40 degC and at a relative humidity below 70% Keep out of reach of children.
Suitable packaging: Must only be kept in original packaging.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Hazardous ingredients: BUTANE
WEL (8 hr exposure limit): 1450 mg/m3 WEL (15 min exposure limit): 1810 mg/m3
鈥? ISOBUTANE
WEL (8 hr exposure limit): 2400 mg/m3 WEL (15 min exposure limit): 9600 mg/m3
鈥? PROPANE
WEL (8 hr exposure limit): 1800 mg/m3 WEL (15 min exposure limit): 7200 mg/m3
Engineering measures: Ensure there is sufficient ventilation of the area.
Respiratory protection: Use in well ventilated area. It is suggested that exposure is kept within the Occupational
Exposure Limits for vapours established by the Reciprocal Calculation Procedure for mixed
exposures to hydrocarbon solvents in HSE Guidance Note EH40:
Hand protection: Wear gloves if prolonged contact is anticipated. Gloves (solvent-resistant).
Eye protection: Not required under normal use conditions.
Skin protection: Not required under normal conditions or unless contact is prolonged.
[cont...]
Issued: 22/06/2007 SAFETY DATA SHEET
TRIM & BUMPER SHINE - SWARFEGA PRO VALET Page 3
9. PHYSICAL AND CHEMICAL PROPERTIES
State: Aerosol
Colour: Colourless
Odour: Characteristic odour
Solubility in water: Insoluble
Flammability limits %: lower: 0.8
upper: 9.0
10. STABILITY AND REACTIVITY
Stability: Stable under normal conditions.
Conditions to avoid: Heat. Direct sunlight. Sources of ignition. Flames.
Haz. decomp. products: If involved in fire, cans may rupture releasing flammable propellant. In combustion emits toxic
fumes of carbon dioxide / carbon monoxide.
11. TOXICOLOGICAL INFORMATION
Chronic toxicity: Deliberate inhalation abuse could prove fatal in extreme cases.
Routes of exposure: Skin Contact- May cause irritation / dryness or defatting of the skin with prolonged contact. Eye
Contact: Severe irritant,will cause redness and stinging Ingestion - May cause nausea,
irritation to the digestive system may occur.
12. ECOLOGICAL INFORMATION
Persistence and degradability: Do not allow to enter watercourses or drains. This product contains no CFCs.
13. DISPOSAL CONSIDERATIONS
Disposal operations: Do not puncture or incinerate even when empty. Dispose of according to local authority
regulations.
Disposal of packaging: Empty completely. Do not puncture or incinerate even when empty. Dispose of waste &
residues in accordance with local authority requirements
NB: The user's attention is drawn to the possible existence of regional or national regulations
regarding disposal.
14. TRANSPORT INFORMATION
ADR / RID
UN no: 1950 ADR Class: 2
Packing group: N/A Classification code: Class 2 : Gases
Shipping name: Aerosols
Labelling: 2.1
[cont...]
Issued: 22/06/2007 SAFETY DATA SHEET
TRIM & BUMPER SHINE - SWARFEGA PRO VALET Page 4
IMDG / IMO
UN no: 1950 Class: 2
EmS: F-D, S-U Marine pollutant: No
IATA / ICAO
UN no: 1950 Class: 2.1
15. REGULATORY INFORMATION
Hazard symbols: Extremely flammable.
Irritant.
Dangerous for the environment.
Risk phrases: R12: Extremely flammable.
R38: Irritating to skin.
R51/53: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
R67: Vapours may cause drowsiness and dizziness.
Safety phrases: S2: Keep out of the reach of children.
S16: Keep away from sources of ignition - No smoking.
S23: Do not breathe vapour / spray
S24: Avoid contact with skin.
S38: In case of insufficient ventilation, wear suitable respiratory equipment.
S51: Use only in well-ventilated areas.
S60: This material and its container must be disposed of as hazardous waste.
Pressurized container: protect from sunlight and do not expose to temperatures exceeding
Precautionary phrases:
50掳C. Do not pierce or burn, even after use.
Do not spray on a naked flame or any incandescent material. Keep away from sources of
ignition - No smoking. Keep out of the reach of children.
Note: The regulatory information given above only indicates the principal regulations specifically
applicable to the product described in the safety data sheet. The user's attention is drawn to
the possible existence of additional provisions which complete these regulations. Refer to all
applicable national, international and local regulations or provisions.
16. OTHER INFORMATION
Other information: This datasheet is compiled using the current EC Aerosol directive guidelines.
For additional information regarding Deb products please contact the Deb Technical Services
[cont...]
Issued: 22/06/2007 SAFETY DATA SHEET
TRIM & BUMPER SHINE - SWARFEGA PRO VALET Page 5
Department (01773 880367).
In all cases of potential poisoning supportive therapy is of the utmost importance.
If medical professionals require advice regarding first aid treatment all Deb products are
registered at the National Poisons unit, Birmingham.
Always ensure users are fully trained and read label before using product.
First Issue.
Risk phrases used in s.2: R12: Extremely flammable.
R38: Irritating to skin.
R51/53: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
R65: Harmful: may cause lung damage if swallowed.
Legal disclaimer: The purpose of the above information is to describe the products only in terms of health and
safety requirements. The information given should not, therefore, be construed as guaranteeing
specific properties or as specification. Customers should satisfy themselves as to the suitability
and completeness of such information for their own particular use.
[final page]
|