SAFETY DATA SHEET
WASH AND WAX Page 1
Issued: 1/08/2007
Revision No: 4
1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING
Product name: WASH AND WAX
D1026/4
Product code:
Use of substance / preparation: Vehicle Shampoo
Company name: DEB Ltd
108 Spencer Road
Belper
Derbyshire
DE56 1JX
Tel: 01773 596700
Fax: 01773 820482
2. HAZARDS IDENTIFICATION
Main hazards: Irritating to eyes.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous ingredients: DODECYL SODIUM BENZENE SULPHONATE 10-30%
CAS: 25155-30-0
[Xi] R36/38
鈥? COCONUT DIETHANOLAMIDE 1-10%
EINECS: 232-483-0 CAS: 8051-30-7
[Xi] R38; [Xi] R41
Contains: Aqua
Sodium Dodecylbenzene Sulphonate
Cocamide DEA
Sodium Lauryl Ether Sulphate
Magnesium Sulphate
Styrene Acrylates Copolymer
Methylchloroisothiazolinone
Methylisothiazolinone
CI 42090
CI 17200
4. FIRST AID MEASURES (SYMPTOMS)
Skin contact: There may be mild irritation at the site of contact.
Eye contact: There may be irritation and redness.
Ingestion: Ingestion of large amounts may cause irritation with diarrhoea and vomiting.
Inhalation: No symptoms.
[cont...]
Issued: 1/08/2007 SAFETY DATA SHEET
WASH AND WAX Page 2
4. FIRST AID MEASURES (ACTION)
Skin contact: Wash contaminated skin immediately with soap and water. Remove contaminated clothing and
launder before re-use.
Eye contact: Wash immediately with clean water for at least 10 minutes, while lifting eye lids. If any soreness
or irritation persists seek medical advice.
Ingestion: Rinse mouth and throat thoroughly. Give about 1/2 pint of liquid to drink. Obtain immediate
medical advice. Do not induce vomiting.
Inhalation: Not Applicable
5. FIRE-FIGHTING MEASURES
Extinguishing media: This product is water based and will not support combustion. Suitable extinguishing media for
the surrounding fire should be used.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Refer to section 8 of SDS for personal protection details.
Clean-up procedures: In the event of spillage mop up bulk and dilute remainder to foul drain with water. Treat large
spillages as industrial waste.
7. HANDLING AND STORAGE
Handling requirements: Do not mix with any material other than water, as directed. Wear suitable personal protective
equipment, as detailed in section 8. If the product is to be used for an application other than
that stated on the label, contact Technical Services Hotline (01773 880367) to check
suitability.
Storage conditions: Protect from extremes of temperature. Store out of direct sunlight
Suitable packaging: Must only be kept in original packaging.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Hand protection: Wear nitrile or plastic coated gloves. Take further advice from reputable glove maufacturer /
supplier regarding suitability /useful contact time of their recommended gloves.
Eye protection: Safety goggles or face shield should be worn if the product is used through high pressure
equipment or splashing is anticipated.
Skin protection: Waterproof overalls and shoes / boots should be worn if the product is used through high
pressure equipment or if splashing is anticipated.
9. PHYSICAL AND CHEMICAL PROPERTIES
State: Liquid
Colour: Blue-purple
Odour: Characteristic odour
Evaporation rate: Negligible
Solubility in water: Soluble
[cont...]
Issued: 1/08/2007 SAFETY DATA SHEET
WASH AND WAX Page 3
Viscosity: Slightly viscous.
pH: 7 - 8
10. STABILITY AND REACTIVITY
Stability: Stable under normal conditions.
Conditions to avoid: Avoid extremes of temperature. Direct sunlight.
Haz. decomp. products: None known.
11. TOXICOLOGICAL INFORMATION
Routes of exposure: Skin Contact- May cause irritation / dryness or defatting of the skin with prolonged contact. Eye
contact- Irritant and may cause inflammation. Ingestion - May cause gastrointestinal
inflammation. Inhalation- No fumes evolved
12. ECOLOGICAL INFORMATION
Persistence and degradability: This product conforms to current EEC directives on biodegradability.
Bioaccumulative potential: No data available.
Other adverse effects: May produce surface foam on agitation.
13. DISPOSAL CONSIDERATIONS
Disposal operations: Absorb large spills with sand or other inert media, and dispose of to an approved landfill site,
contact local authorities for further information
Disposal of packaging: Drain well. Dispose of as normal industrial waste.
NB: The user's attention is drawn to the possible existence of regional or national regulations
regarding disposal.
14. TRANSPORT INFORMATION
ADR / RID
UN no: Not Classified.
IMDG / IMO
UN no: Not Classified.
IATA / ICAO
UN no: Not Classified.
15. REGULATORY INFORMATION
Hazard symbols: Irritant.
Risk phrases: R36: Irritating to eyes.
Safety phrases: S2: Keep out of the reach of children.
S46: If swallowed, seek medical advice immediately and show this container or label.
[cont...]
Issued: 1/08/2007 SAFETY DATA SHEET
WASH AND WAX Page 4
Contains parmetol df 35. May produce an allergic reaction.
Precautionary phrases:
Note: The regulatory information given above only indicates the principal regulations specifically
applicable to the product described in the safety data sheet. The user's attention is drawn to
the possible existence of additional provisions which complete these regulations. Refer to all
applicable national, international and local regulations or provisions.
16. OTHER INFORMATION
Other information: For additional information regarding Deb products please contact the Deb Technical Services
Department (01773 880367).
In all cases of potential poisoning supportive therapy is of the utmost importance.
If medical professionals require advice regarding first aid treatment all Deb products are
registered at the National Poisons unit, Birmingham.
The above information complies with the 199/45/EC Directive and it's ammendments.
Always ensure users are fully trained and read label before using product.
Data Compiled using Raw Material Supplier Data and Lycos Classification System.
Reason for reissue - Change in ingredients
Risk phrases used in s.3: R36/38: Irritating to eyes and skin.
R38: Irritating to skin.
R41: Risk of serious damage to eyes.
Legal disclaimer: The purpose of the above information is to describe the products only in terms of health and
safety requirements. The information given should not, therefore, be construed as guaranteeing
specific properties or as specification. Customers should satisfy themselves as to the suitability
and completeness of such information for their own particular use.
[final page]
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP