BoroTec 10009
=============================================================================
Section I - IDENTIFICATION
=============================================================================
Eutectic Canada Inc.
52 Hymus Boulevard, Suite 220
Pointe Claire, Quebec
H9R 1C9
Emergency Telephone: (514) 695-7500
Product Name: BoroTec 10009
AWS standard terminology: Thermal Spray Powder
WHMIS Classification: D-2A Serious Toxic Effects
D-2B Other Toxic Effects
Transport of Dangerous Goods: Not Applicable
=============================================================================
Section II - HAZARDOUS INGREDIENTS
=============================================================================
Ingredient Range CAS Number Exposure Limit
wt% mg/m3
Nickel, elemental 60-100 7440-02-0 1
Chromium, elemental 10-30 7440-47-3 0.5
Boron, elemental 5-10 7440-42-8 10
Iron, elemental 1-5 7439-89-6 5 (fume)
Silicon, elemental 1-5 7440-21-3 10
=============================================================================
Section III - PHYSICAL / CHEMICAL CHARACTERISTICS
=============================================================================
The following data should only be used in the context of the Material Safety
Data Sheet.
Physical State: Powder
Appearance and Odour: Dark grey odorless powder
=============================================================================
Section IV - FIRE AND EXPLOSION DATA
=============================================================================
Flammable: No
1
BoroTec 10009
=============================================================================
Section V - REACTIVITY
=============================================================================
Level of stability: Stable
Hazardous Polymerization: Will not occur
=============================================================================
Section VI - HEALTH HAZARD DATA
=============================================================================
The body can be affected if fumes and gases are inhaled, and/or come into
contact with eyes.
FUMES AND GASES CAN BE DANGEROUS TO YOUR HEALTH
SHORT TERM (ACUTE) over exposure to welding fumes may result in discomfort such
as dizziness, nausea or irritation of the nose, throat or eyes.
FLUORIDES - compounds evolved may cause skin and eye burns and/or pulmonary
edema.
MANGANESE, MANGANESE DIOXIDE - toxicity caused by inhalation of dust or fumes.
Remove from exposure. Wash eyes and/or skin with water to remove dust.
SILICON, SILICON OXIDE - Possible eye irritant. Remove by washing eyes with
lots of water.
CHROMIUM - Inhalation of fume with chromium (VI) compounds can cause irritation
of the respiratory system, damage lungs and asthma. Swallowing chromium (VI)
salts can cause severe injury or death. Dusts on the skin can form ulcers. Eyes
can be burned by chromium (VI) compounds.
NICKEL, NICKEL OXIDE - Inhalation of fume with nickel compounds may cause
metallic taste, nausea, tightness in chest, fever, allergic reactions.
MOLYBDENUM -Trioxide has caused irritation of the eyes, nose and throat, weight
loss and digestive disturbances in animals.
BARIUM - Inhalation of fumes with barium compounds may cause aching eyes,
rhinitis, frontal headache, wheezing, laryngeal spasms, salivation, anorexia.
COPPER - Metal fume fever can be caused by fresh copper oxide fumes.
LEAD - Inhalation of gases, fumes, dust or compounds (soluble or, insoluble) can
cause blood and cell problems.
SILVER - Salts of silver are corrosive. Ulceration and eye burns are treated by
flushing with copious amounts of water.
ZINC - Inhalation of zinc fumes may cause chills, breathing difficulties, fever,
cough, muscular pain, nausea and vomiting. Recovery generally complete.
CADMIUM - Fumes cause irritation of the nose and throat. Sufficient inhalation
(after a delay of several hours) may develop coughing, chest pain, sweating,
chills, shortness of breath and weakness. Death may occur.
2
BoroTec 10009
TIN - Eye, skin and respiratory system irritation from fumes.
LONG TERM (CHRONIC) over exposure may lead to siderosis (iron deposits in
lungs), affect pulmonary functions, blood and cell disorders.
FLUORIDES - Repeated exposure to fluorides can cause serious bone erosion.
MANGANESE, MANGANESE DIOXIDE - Long term over exposure to these compounds
may affect the central nervous system. Symptoms include muscular weakness,
tremors and behavioral and handwriting changes.
SILICON, SILICON OXIDE - Prolonged exposure to dust can cause pulmonary fibrosis
(silicosis).
CHROMIUM - Chromium (VI) compounds are considered by OSHA to be carcinogenic.
Absorption of chromium (VI) compounds through the skin can cause systemic
poisoning primarily affecting the kidneys and liver.
NICKEL, NICKEL OXIDE - Long term over exposure to nickel compounds may cause
lung fibrosis or pneumoconiosis. Nickel and its compounds are considered by the
OSHA as carcinogenic.
MOLYBDENUM - Not known
BARIUM - Long term exposure to soluble barium compounds may cause nervous
disorders and may have deleterious effects on the heart and circulatory systems.
COPPER - No adverse long-term effects have been reported.
LEAD - Repeated and prolonged exposures to gases, fumes or dusts are poisonous.
This may lead to blood, cell, kidney, liver and/or generic disorders.
SILVER - Silver and its compounds cause pigmentation of the skin, eyes and
respiratory tract (argyria).
ZINC - Severe and prolonged over exposure may cause pulmonary edema and
pneumonia.
CADMIUM - Repeated and prolonged exposures to fumes may cause loss of smell,
ulceration of the nose, shortness of breath (emphysema), kidney damage and mild
anemia.
TIN - No significant long term effects.
=============================================================================
Section VII - EMERGENCY FIRST AID
=============================================================================
Remove to well ventilated area. Obtain medical assistance and apply artificial
respiration if necessary.
3
BoroTec 10009
=============================================================================
Section VIII - PREVENTIVE MEASURES
=============================================================================
Personal protective equipment: Use NIOSH approved respirator for protection
against fumes in confined areas or where local exhaust or ventilation does not
keep exposure below the recommended exposure limit. Wear protective helmet or
use face shield with filter lens. Provide protective screens and flash goggles
if necessary. Refer to CSA W117.2 - Safety in Welding and Cutting - for further
information.
Storage and handling: Keep in cool dry place.
Steps to be taken if material is released or spilled: Powder should be kept
from contaminating the water table. Sweep up immediately.
Waste Disposal Method: Prevent waste from contaminating environment. Disposal
should be in accordance with local, provincial and federal regulations.
=============================================================================
Section IX - PREPARATION OF MATERIAL SAFETY DATA SHEET
=============================================================================
Prepared by: Director of Products and Services
Contact number: 514-695-7500
Date prepared: 30/09/99
Date revised: 30/09/07
4
|