=============================================================================
Section I - IDENTIFICATION
=============================================================================
Eutectic Canada Inc.
52 Hymus Boulevard, Suite 220
Pointe Claire, Quebec
H9R 1C9
Emergency Telephone: (514) 695-7500
Product Name: Pre/Post Cleaner 1002
AWS Standard Terminology: Chemical Aid
WHMIS Classification: D-2B Other Toxic Effects
Transportation of Dangerous Goods: Not Applicable
=============================================================================
Section II - HAZARDOUS INGREDIENTS
=============================================================================
Ingredient Range CAS Number Exposure Limit
wt% mg/m3
Sodium sulphate 60-100 7767-82-6 10
Magnesium fluosilicate 10-30 16949-65-8 Not listed
Sodium phosphate 10-30 7601-54-9 Not listed
Alkylaryl sodium 5-10 68037-49-0 Not listed
sulphonate
=============================================================================
Section III - PHYSICAL / CHEMICAL CHARACTERISTICS
=============================================================================
The following data should only be used in the context of the Material Safety
Data Sheet.
Physical State: Powder
Appearance and Odour: White and brown granular powder; slight odour
=============================================================================
Section IV - FIRE AND EXPLOSION DATA
=============================================================================
Flammable: No
1
Pre/Post Cleaner 1002
=============================================================================
Section V - REACTIVITY
=============================================================================
Level of stability: Stable
Hazardous Polymerization: Will not occur Hazardous Decomposition Products:
Emits toxic fumes of SOx and Na2O
=============================================================================
Section VI - HEALTH HAZARD DATA
=============================================================================
Route of Entry/Exposure: Skin contact, eye contact, inhalation Short and Long
Term Effects: Inhalation of fumes may cause respiratory track irritation from
prolonged contact.
=============================================================================
Section VII - EMERGENCY FIRST AID
=============================================================================
Eyes and skin: Rinse thoroughly with clear water. Inhalation: Remove to well
ventilated area. Obtain medical assistance if necessary.
=============================================================================
Section VIII - PREVENTIVE MEASURES
=============================================================================
Personal protective equipment: Use CSA approved respirator for protection
against fumes in confined areas or where local exhaust or ventilation does not
keep exposure below the recommended exposure limit. Wear protective goggles and
chemical resistant gloves. Refer to CSA W117.2 - Safety in Welding and Cutting
- for further information.
Storage and handling: Store in a cool dry place.
Steps to be taken if material is released or spilled: Avoid skin or eye
contact. Absorb with an inert material.
Waste Disposal Method: Prevent waste from contaminating environment. Disposal
should be in accordance with local, provincial and federal regulations.
=============================================================================
Section IX - PREPARATION OF MATERIAL SAFETY DATA SHEET
=============================================================================
Prepared by: Director of Products and Services
Contact number: 514-695-7500
Date prepared: 30/09/99
Date revised: 30/09/07
2
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP