=============================================================================
Section III - PHYSICAL / CHEMICAL CHARACTERISTICS
=============================================================================
The following data should only be used in the context of the Material Safety
Data Sheet.
Physical State: Paste
Appearance and Odour: White paste, slight odour
=============================================================================
Section IV - FIRE AND EXPLOSION DATA
=============================================================================
Flammable: No
1
Autochem Flux E-100
=============================================================================
Section V - REACTIVITY
=============================================================================
Level of stability: Stable
Hazardous Polymerization: Will not occur
=============================================================================
Section VI - HEALTH HAZARD DATA
=============================================================================
Route of Entry/Exposure: Skin / eye contact, inhalation, ingestion.
Short and Long Term Effects: Inhalation of fumes may cause respiratory track
irritation. Skin may become sensitized from prolonged contact. Poison by
ingestion.
=============================================================================
Section VII - EMERGENCY FIRST AID
=============================================================================
Eyes and skin: Rinse thoroughly with clear water.
Inhalation: Remove to well ventilated area. Obtain medical assistance if
necessary.
Ingestion: Poison. Obtain medical assistance.
=============================================================================
Section VIII - PREVENTIVE MEASURES
=============================================================================
Personal protective equipment: Use CSA approved respirator for protection
against fumes. Wear protective goggles and chemical resistant gloves.
Storage and handling: Keep in tightly closed glass or plastic containers. Do
not store near open flame.
Steps to be taken if material is released or spilled: Avoid skin or eye contact.
Absorb with an inert material.
Waste Disposal Method: Prevent waste from contaminating environment. Disposal
should be in accordance with local, provincial and federal regulations.
=============================================================================
Section IX - PREPARATION OF MATERIAL SAFETY DATA SHEET
=============================================================================
Prepared by: Director of Products and Services
Contact number: 514-695-7500
Date prepared: 30/09/99
Date revised: 30/09/07
2
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP