3427 Concord Road
York, PA 17402
Phone: 717-757-0200
800-225-2787
Alternative Names
Lidocaine for injection
Lignocaine for injection
鈥榅ylocaine鈥? Plain
2. COMPOSITION /INFORMAITON ON INGREDIENTS
CAS No. : None assigned for the product
Use : Local anesthetic solution for use in infiltration anesthesia, intravenous
regional anesthesia and nerve blocks.
% (w/w) HAZARDOUS INGREDIENT (S) CAS No.
0.5-5.0 Lidocaine hydrochloride 000073-78-9
3. HAZARDS INDENTIFICATION
Form : liquid
Color : clear aqueous solution
Odor : odorless
As a result of the physical presentation of the product, the risk to health in the normal handling of the product is expected to
be low.
4. FIRST AID MEASURES
Inhalation : Remove patient from exposure. Obtain medical attention if ill effects
occur.
Skin Contact : Remove contaminated clothing. Wash skin with soap and water. If
symptoms (irritation or blistering) occur obtain medical attention.
Eye Contact : Irrigate with eyewash solution or clean water, holding the eyelids apart,
for at least 15 minutes. Obtain medical attention.
Ingestion : Wash out mouth with water and give 200-300ml of water to drink. Do
not induce vomiting. Obtain medical attention.
Note to Physicians
Symptomatic treatment and supportive therapy as indicated. For further detail consult the prescribing information.
Form no. CS 0001 Rev. 9/01
5. FIRE FIGHTING MEASURES
Flammable Properties
If involved in a fire, it may burn and emit noxious and toxic fumes.
Extinguishing Media : water spray, foam, dry chemical or CO2.
Fire Fighting Protective Equipment : A self contained breathing apparatus and suitable
protective clothing should be worn in fire
conditions.
6. ACCIDENTAL RELEASE MEASURES
Ensure suitable personal protetion during removal of spillages. Clear up spillages. Wash the spillage area with water.
Transfer spilled vials to a suitable container for disposal. Take care to avoid needles and broken containers.
7. HANDLING AND STORAGE
7.1. HANDLING
No special precautions are necessary when handling packed product. In case of accident, avoid contact with skin and eyes.
Do not breathe mist.
7.2. STORAGE
Keep container tightly closed. Protect from light.
Storage Temperature : Keep at a temperature not exceeding (Deg C) 25.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls
No ACGIH TLV or OSHA PEL assigned.
TWA STEL /CEILING (C)
HAZARDOUS INGREDIENT(S) ppm mg/m3 ppm mg/m3
Lidocaine hydrochloride _ 4 _ _ COM
This is an in-house standard for the active ingredient during manufacture.
Personal Protective Equipment
Wear suitable protective clothing.
Respirators : If needed, use NIOSH approved respirator for organic
vapors, dusts and mists with a TLV greater than 0.05
mg/m3.
Protective Clothing : If needed, impervious gloves and apron.
Eye Protection : Chemical tight goggles,
Other Protective Equipment : Eyewash station and safety shower in work area.
9. PHYSICAL AND CHEMICAL PROPERTIES
Form : liquid
Color : clear aqueous solution
Odor : odorless
pH (Value) : 6.5
Vapor Pressure (mm Hg) : 17 at 20 Deg C
Solubility (Water) : soluble
Specific Gravity : 1.007
Vapor Density (Air = 1) : 0.6
The following information refers to active ingredient:
Inhalation : Unlikely route of exposure. May cause
tingling/numbness in exposed areas (paresthesia). High
atmospheric concentrations may lead to anesthetic
effects. May produce a reduced heart rat and reduction
in blood pressure with a resulting feeling of dizziness.
Skin Contact : May cause numbness. Repeated an/or prolonged contact
may cause skin sensitization in a small proportion of
sensitive individuals.
Eye Contact : May cause excessive watering of the eye (lacrimation).
Ingestion : By analogy with a similar substance this material is
likely to be harmful. Lidocaine: Oral Median Lethal
Dose 317mg/kg (rat). May produce numbness of the
tongue and anesthetic effects on the stomach.
Long Term Exposure : Repeated exposure of animals to high levels produces adverse
effects on the : liver, central nervous system.
12. ECOLOGICAL INFORMATION
No information on this formulation. The product is soluble in water. The following information refers to active ingredient:
Environmental Fate and Distribution
The substance has low potential for bioaccumulation.
Persistence and Degradation
Not readily biodegradable. (ISO 7827-1984 (E))
Toxicity
TSCA (Toxic Substance Control Act) Regulations, 40CFR 710: This product is a drug and is exempt from TSCA
regulation. CERCLA and SARA Regulations (40CFR 355,370, and372): This product does not contain any chemicals
subject to the reporting requirements of SARA Section 313. Other Determined Regulations: California Proposition 65:
No warnings are necessary.
16. OTHER INFORMATION
This Material Safety Data Sheet was prepared inaccordance with ANSI Standard Z400.1 1993, and modified 1998.
GLOSSARY
COM : The company aims to control exposure in its workplace to this limit
This is an in-house standard for the active ingredient handled during manufacture
TLV : The company aims to control exposure in its wokplace to the ACGIH limit
Sk : Can be absorbed through skin
Sen : Capable of causing respiratory sensitization
The information herein is given in good faith but no warranty, expressed or implied, is made.
(Revision : 01 Date : 0200)
(US00)
(PH1394)
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP