This MSDS complies with OSHA'S Hazard Communication Standard 29 CFR 1910.1200 and OSHA Form 174
IDENTITY AND DISTRIBUTOR'S INFORMATION
NFPA Rating: Health-2; Flammability-3; Reactivity-0; Special- - HMIS Rating: Health-2; Flammability-3; Reactivity-0; Personal Protection-B
DOT Hazard Classification: ORM-D
Manufacturer: API International, Inc.
Identity (trade name as used on label):
Address: 12505 W. Herman Road WARCO Carb & Choke Cleaner #0071213
Address: Tualatin, OR 97062
MSDS Number: A00736 Revision- 12
Phone: (503) 692-3800
Date Prepared: 01/15/02 Prepared By: CH/IBi
EMERGENCY RESPONSE NUMBER: Chemtrec 800-424-9300
NOTICE: JUDGEMENT BASED ON INDIRECT TEST DATA
SECTION 1 - MATERIAL IDENTIFICATION AND INFORMATION
SARA OSHA PEL ACGIH Carcinogen
COMPONENTS-CHEMICAL NAMES AND COMMON NAMES
(Hazardous Components 1% or greater; Carcinogens 0.1% or greater) CAS Number III LIST (ppm) TLV (ppm) Ref. Source **
50
108-88-3 Yes 100 d
TOLUENE
(skin)
67-64-1 No 1000 750 d
ACETONE
8052-41-3 No 400 400 d
ALIPHATIC PETROLEUM DISTILLATE
67-56-1 Yes 200 200 d
METHYL ALCOHOL
WARNING: This product contains a chemical or chemicals known to the State
of California to cause birth defects or other reproductive harm.
SECTION 2 - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: N/A Specific Gravity (H2O=1): Concentrate Only = 0.827
Vapor Pressure: PSIG @ 70掳F (Aerosols): 85-100 Vapor Pressure (Non-Aerosols)(mm Hg and Temperature): N/A
Vapor Density (Air = 1): N/E Evaporation Rate ( = 1): N/E
Solubility in Water: Partial Water Reactive: No
Appearance and Odor: Clear liquid, with aromatic solvent odor.
SECTION 3 - FIRE AND EXPLOSION HAZARD DATA
FLAMMABILITY as per USA FLAME PROJECTION TEST Auto Ignition Temperature Flammability Limits in Air by % in Volume:
N/E % LEL: N/E % UEL: N/E
(aerosols) EXTREMELY FLAMMABLE
FLASH POINT AND METHOD USED (non-aerosols): N/A EXTINGUISHER MEDIA: Foam, dry chemical, carbon dioxide, water.
SPECIAL FIRE FIGHTING PROCEDURES: Self-contained breathing apparatus.
Unusual Fire & Explosion Hazards: Do not expose aerosols to temperatures above 130掳F or the container may rupture.
SECTION 4 - REACTIVITY HAZARD DATA
STABILITY [ X ] STABLE [ ] UNSTABLE HAZARDOUS POLYMERIZATION [ ] WILL [ X ] WILL NOT OCCUR
Incompatibility (Mat. to avoid): Acids and strong oxidizers. Conditions to Avoid: Open flame, welding arcs, heat, sparks.
Hazardous Decomposition Products: CO, CO2.
SECTION 5 - HEALTH HAZARD DATA
PRIMARY ROUTES OF ENTRY: [ X ] INHALATION [ ] INGESTION [ X ] SKIN ABSORPTION [ ] EYE [ ] NOT HAZARDOUS
ACUTE EFFECTS:
Inhalation: Excessive inhalation of vapors can be harmful and may cause headache, dizziness, asphyxia, anesthetic effects and possible unconsciousness.
Eye Contact: Irritation Skin Contact: Irritation
Ingestion: Possible chemical pneumonitis if aspirated into lungs. Nausea.
CHRONIC EFFECTS: (Effects due to excessive exposure to the raw materials of this mixture) Excessive inhalation may result in central nervous system effects. .
Medical Conditions Generally Aggravated by Exposure: May aggravate existing eye, skin, or upper respiratory conditions.
EMERGENCY FIRST AID PROCEDURES
Eye Contact: Flush with water for at least 15 minutes. If irritated, seek medical attention.
Skin Contact: Remove contaminated clothing. Launder before rewearing. Wash skin with soap and water. If irritated, seek medical attention.
Inhalation: Remove to fresh air. Resuscitate if necessary. Get medical attention.
Ingestion: DO NOT INDUCE VOMITING. Get immediate medical attention.
Page 1 of 2
MATERIAL SAFETY DATA SHEET
CARB & CHOKE CLEANER
SECTION 6 - CONTROL AND PROTECTIVE MEASURES
Respiratory Protection (specify type): If vapor concentration exceeds TLV, use respirator approved by MSHA/NIOSH for organic vapor.
Protective Gloves: Rubber gloves. Eye Protection: Safety glasses recommended.
Ventilation Requirements: Adequate ventilation to keep vapor concentration below TLV.
Other Protective Clothing & Equipment: None
Hygienic Work Practices: Wash with soap and water before handling food. Remove contaminated clothing.
SECTION 7 - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps To Be Taken If Material Is Spilled Or Released: Absorb spilled liquid with suitable medium. Incinerate or landfill according to local, state or federal regulations. Prevent from
entering drains or sewers.
Waste Disposal Methods: Aerosol cans when vented to atmospheric pressure through normal use, pose no disposal hazard.
Precautions To Be Taken In Handling & Storage: Do not puncture or incinerate containers. Do not store at temperatures above 130掳F.
Other Precautions &/or Special Hazards: KEEP OUT OF REACH OF CHILDREN. Avoid food contamination. Avoid breathing vapors. Remove ignition sources.
We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind.
** Chemical Listed as Carcinogen or Potential Carcinogen. [a] NTP [b] IARC Monograph [c] OSHA [d] Not Listed [e] Animal Data Only
Page 2 of 2
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP