WARCO PREMIUM LUBRICANTS
MATERIAL SAFETY DATA SHEET
WARCO OIL TREATMENT WITH ANTIWEAR
Any Questions Call: Emergency Telephone: NFPA/HMIS Hazard Code
(24 HOURS)
4=Extreme Health=0/0
Warco Products, Inc.
3=High Fire=1/1
CHEMTREC
18400 SW Teton Ave.
2=Moderate Reactivity=0/0
(800) 424 9300
Tualatin, OR 97062 USA
1=Slight Personal
Tel: (503) 612 0882
Protection Index: NA
0=Insignificant
I. Ingredients/Identification Information
Components (Specific Chemical Identity: Common Name(s))
Severely solvent refined heavy paraffinic petroleum oil CAS Number 64741-88-4
Zinc Salt Dialkyl Dithiophosphoric Acid CAS Number 68649-42-3
Copolymer of Ethylene and Propane
Synonyms: Engine Treatment / Oil Extender
Chemical Name: N/A
Chemical Family: Blend
II. Physical/Chemical Characteristics
Boiling Point: Specific Gravity (H20=1)
Not Available 0.86 @ 60 F
Vapor Pressure: (mm Hg) Vapor Density (Air=1)
Negligible > 10
Solubility in Water Flash Point (Method Used)
Negligible 482 F (ASTM D-92)
Appearance and Odor: Amber-Colored Liquid; Lube Oil Odor
Handling and Storage: To avoid product degradation, water contamination should be avoided
and minimum feasible handling temperatures should be maintained.
Periods of exposure to high temperatures (>200 F) should be minimized.
Product degradation may increase health hazard risks.
Fire and Explosion Slightly combustible: OSHA/NFPA Class-IIIB Combustible liquid. When
heated above its flash point, this material will release flammable vapors
Hazards
which can burn in the open or be explosive in confined spaces if exposed
to an ignition source. Mists or sprays may be flammable at temperatures
below the normal flash point. Keep away from extreme heat and open
flame.
Fire Extinguishing Media Dry chemical and carbon dioxide. Foam and water fog are effective but
cause frothing.
Special Firefighting For fires involving this material, do not enter any enclosed or confined fire
space without proper protective equipment. This may include self
Procedures
contained breathing apparatus to protect against the hazardous effects of
combustion products and oxygen deficiencies. If firefighters cannot work
upwind to the fire, respiratory protective equipment must be worn. Cool
tanks and container exposed to fire with water. Burning liquid will float on
water. Notify appropriate authorities if liquid enters sewer/waterways.
WARCO PREMIUM LUBRICANTS
MATERIAL SAFETY DATA SHEET
WARCO OIL TREATMENT WITH ANTIWEAR
III. Health Hazards
Summary of Acute Hazards Not expected to present a significant health hazard upon short-term
exposure
Route of Exposure Signs and Symptoms
Inhalation No significant Adverse health effects are expected to occur upon
short-term exposure.
Eye Contact No irritation is expected from short-term exposure
Skin Absorption No significant adverse health effects are expected to occur upon short-
term exposure
Skin Irritation No irritation is expected from short-term exposure
Ingestion Essentially nontoxic. Do not induce vomiting because of aspiration
hazard. Get medical advice by calling a poison control center,
physician or emergency room.
Chronic Hazards Prolonged and/or repeated contact with this material may produce skin
irritation and inflammation.
Special Health Effects Personnel with pre-existing skin disorders should avoid contact.
IV. Protective Equipment and Other Control Measures
Respiratory None is needed under anticipated use conditions with adequate ventilation. If
exposure exceeds the occupational exposure limits, follow OSHA standards or
equivalent and wear proper NIOSH/MSHA approved respiratory equipment.
Eye Safety glasses should be adequate protection under most conditions of use.
Wear goggles and/or face shield if splashing or spraying is likely. Especially if
heated above 125 F. Have suitable eye wash water available.
Skin Avoid prolonged and/or repeated skin contact, or wear impervious protective
clothing. When leaving work, wash hands/exposed skin with soap and water.
Engineering Controls Use adequate ventilation to keep oil mists of this material below applicable
standard(s).
Other Hygienic and Wash hands with plenty of soap and water before eating, drinking, smoking or
use of toilet facilities. Do not use gasoline, solvents, kerosene or harsh
Work Practices
abrasive skin cleaners for washing exposed skin areas. Take a shower after
work if general contact occurs. Remove oil-soaked clothing and launder
before reuse. Launder or discard contaminated leather gloves and shoes.
V. Emergency and First Aid
Vaporization is not expected at ambient temperatures and this material is not
Inhalation
expected to be an inhalation problem under the anticipated conditions of use.
In case of overexposure, move person to fresh air.
Eye Contact Flush eyes with clean, low-pressure water for at least 15 minutes, occasionally
lifting the eyelids. If pain or redness persists after flushing, obtain medical
attention.
Skin Contact Remove by wiping, then wash skin thoroughly with plenty of soap and water.
Remove contaminated clothing and thoroughly clean before reuse, discard
contaminated leather gloves and shoes.
WARCO PREMIUM LUBRICANTS
MATERIAL SAFETY DATA SHEET
WARCO OIL TREATMENT WITH ANTIWEAR
VI. Spill, Disposal and Regulatory Information
Precautions if Material is Contain spill and prevent it from entering all water bodies, if possible.
Safely stop flow of spill. Evacuate non-essential personnel from
Spilled or Released
immediate spill area due to slipping hazards. In urban area, cleanup as
soon as possible. In natural environments, cleanup on advice from
ecologists. This material will float on water. Absorbent materials and
pads can be used. Comply with all applicable laws. Spills may need to
be reported to the National Response Center (800 424 8802). The
spilled material and any soil or water which it has contacted may be
hazardous to animal/aquatic life.
Waste Disposal Methods Maximize product recovery for reuse or recycling. Conditions of use
may cause this material to become a 鈥渉azardous waste,鈥? as defined by
state or federal laws. Use approved treatment, transporters, and
disposal sites in compliance with all applicable laws. If spill is
introduced into a waste water treatment system, chemical and
biodegradable if gradually exposed to microorganisms. Potential
treatment and disposal methods include land farming, incineration and
land disposal, if permitted.
U.S. Department of Transportation (DOT)
Transportation
Hazard Class Non-regulated
Classifications
Shipping Name Petroleum Lubricant
Identification Number Not applicable
Toxic Substances
All components of this product are listed in the TSCA inventory
Control Act
Emergency Planning and SARA Title III Section 311.312 Categorizations (40 CFR 370):
This product is not a hazardous chemical under 29 CFR 1910.1200,
Community Right to Know
and therefore is not covered by SARA Title III of SARA
SARA Title III Section 313 Information (40 CFR 372)
This product does not contain a chemical which is listed in section 313
above de minimis concentrations
Comprehensive Releases of this material to air, land or water are not reportable to the
national response center under CERCLA/Superfund or to state and
Environmental Response
local emergency planning committees under the Superfund
Compensation and Liability Amendments Reauthorization Act (SARA) Title III, Section 304.
Act (40 CFR 302.4)
Resource Conservation and When this product becomes a waste, it is classified as nonhazardous
waste under the criteria of RCRA (40 CFR 261).
Recovery Act
Disclaimer of Liability
The information in this Safety Sheet was obtained from sources which we believe are reliable. HOWEVER, THE
INFORMATION IS PROVIDED WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED, REGARDING ITS
CORRECTNESS. The conditions or methods of handling, storage, use and disposal of the product are beyond our
control and may be beyond our knowledge. FOR THIS AND OTHER REASONS, WE DO NOT ASSUME ANY
RESPONSIBILITY AND EXPRESSLY DISCLAIM LIABILITY FOR LOSS, DAMAGE OR EXPENSE ARISING OUT
OF OR IN ANY WAY CONNECTED WITH THE HANDLING, STORAGE, USE OR DISPOSAL OF THE PRODUCT.
This safety sheet was prepared and is to be used only for this product. If the product is used as a component in
another product, this safety sheet may not be applicable. SOME OF THE INFORMATION PRESENTED AND
CONCLUSIONS DRAWN HEREIN ARE FROM SOURCES OTHER THAN DIRECT TEST DATA ON THE MIXTURE
ITSELF.
|