36 Draffin Road, Hilton, NY 14468 Phone: 800-828-6351 585-392-3434 Fax: 585-392-2691
EMERGENCY NUMBERS: CHEMTREC (800) 424-9300 Monroe Fluid Technology (800) 828-6351
Website: http://www.monroefluid.com
Material Safety Data Sheet
Product Name: ASTRO-CUT SOL N Effective Date: 06/02/08 Date Printed: 06/03/08 Page: 1
HMIS Rating:
Health: 1 Flammability: 1 Reactivity: 0 Personal Protection: B
1) INGREDIENTS: (% wt., unless otherwise noted)
CHEMICAL NAME CAS # %
Heavy Naphthenic, severely hydrotreated, chemically 64742-52-5 70-100
neutralized oil
This document is prepared pursuant to the OSHA Hazard Communication Standard (29 CFR 1910.1200). In addition, other
substances not "Hazardous" per this OSHA Standard may be listed. Where proprietary ingredient shows, the identity
may be made available as provided in this standard.
2) PHYSICAL DATA:
Boiling Point: Not Determined
Vapor Pressure: Not Determined
Vapor Density: Not Determined
Solubility In Water: Complete/Forms emulsion
8.9 卤 0.3
pH:@ 20:1 in water:
0.915 卤 0.01
Sp. Gravity:
Appearance: Brown clear liquid
Odor: Bland
3) FIRE AND EXPLOSION HAZARD DATA:
355o F.
Flash Point:
Method Used: COC
FLAMMABLE LIMITS:
LFL: Not Determined
UFL: Not Determined
EXTINGUISHING MEDIA: Water spray, foam or carbon dioxide
FIRE & EXPLOSION HAZARDS: Intense heat may cause drums to rupture. Cool fire-exposed surfaces.
FIRE-FIGHTING EQUIPMENT: Treat as hot oil. Firefighters should wear NIOSH-approved self-contained
breathing apparatus.
21-84-2B
36 Draffin Road, Hilton, NY 14468 Phone: 800-828-6351 585-392-3434 Fax: 585-392-2691
EMERGENCY NUMBERS: CHEMTREC (800) 424-9300 Monroe Fluid Technology (800) 828-6351
Website: http://www.monroefluid.com
Material Safety Data Sheet
Product Name: ASTRO-CUT SOL N Effective Date: 06/02/08 Date Printed: 06/03/08 Page: 2
4) REACTIVITY DATA:
STABILITY: (conditions to avoid) Stable under normal use and storage
INCOMPATIBILITY: (specific materials to avoid) Strong oxidizers
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal decomposition may produce asphyxiants.
HAZARDOUS POLYMERIZATION: Will not occur
5) ENVIRONMENTAL AND DISPOSAL INFORMATION:
ACTION TO TAKE FOR SPILLS/LEAKS: Treat as oil spill. Contain spill, collect onto inert absorbent. Do
not flush into drain or sewers. Place in a DOT container for disposal.
DISPOSAL METHOD: Dispose of in accordance with federal, state and local regulations.
6) HEALTH HAZARD DATA:
EYE: Contact may cause irritation.
SKIN CONTACT: Prolonged contact may cause irritation.
SKIN ABSORPTION: Not likely to occur
INGESTION: Small amounts ingested incidental to normal handling are not likely to cause injury; larger
quantities ingested may cause injury.
INHALATION: Inhalation of vapors or mist may be irritating to respiratory passages.
SYSTEMIC (other target organ) EFFECTS: None known
TERATOLOGY (birth defects): No adverse effects expected
REPRODUCTIVE EFFECTS: No adverse effects expected
MUTAGENICITY (effects on genetic material): No adverse effects expected
CARCINOGENICITY: IARC: NO NTP: NO OSHA: NO
7) FIRST AID:
EYES: Flush with large amounts of water for 15 minutes. If irritation persists, consult a physician.
SKIN: Wash off with soap in flowing water or shower.
INGESTION: Obtain medical assistance.
INHALATION: Remove to fresh air. If symptoms persist, consult a physician.
NOTE TO PHYSICIAN: Treatment of overexposure should be directed toward the control of symptoms
and the clinical condition.
8) HANDLING PRECAUTIONS:
EXPOSURE GUIDELINE: Heavy Naphthenic, severely hydrotreated chemically neutralized oil (Mist):
OSHA PEL: 5 mg/m3
VENTILATION: General room ventilation should be satisfactory. Local exhaust ventilation may be
necessary if misting is generated.
21-84-2B
36 Draffin Road, Hilton, NY 14468 Phone: 800-828-6351 585-392-3434 Fax: 585-392-2691
EMERGENCY NUMBERS: CHEMTREC (800) 424-9300 Monroe Fluid Technology (800) 828-6351
Website: http://www.monroefluid.com
Material Safety Data Sheet
Product Name: ASTRO-CUT SOL N Effective Date: 06/02/08 Date Printed: 06/03/08 Page: 3
RESPIRATORY PROTECTION: None normally required. If mist is in excess of 5 mg/m3 , use NIOSH-
approved respirator.
SKIN PROTECTION: Oil-resistant gloves for prolonged or repeated contact
EYE PROTECTION: Safety glasses
9) ADDITIONAL INFORMATION:
SPECIAL PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:
Normal precautions common to good manufacturing practices should be followed in handling and storing.
Store away from food. Wash hands before eating, drinking or smoking and after handling. Use as
directed.
REGULATORY INFORMATION: (Not meant to be all-inclusive--selected regulations represented).
NOTICE: The information herein is presented in good faith and believed to be accurate as of the effective date shown above.
However, no warranty, express or implied, is given. Regulatory requirements are subject to change and may differ from one
location to another; it is the buyer's responsibility to ensure that its activities comply with federal, state or provincial, and local
laws and regulations. See MSD Sheet for health and safety information.
TOXIC SUBSTANCES CONTROL ACT (TSCA):
The components of this product are listed on the TSCA inventory.
This product contains the toxic chemical or chemicals listed below, which are subject to the supplier notification requirements of
Section 313 of the Superfund Amendments and Reauthorization Act of 1986 ("SARA") and the requirements of 40 CFR part 372.
None
This notice must not be detached from the foregoing MSDS. If the MSDS is copied for any reason, including distribution, this
notice must also be copied and accompany all redistributed MSDS'. Failure to do so may subject you to penalties under law.
This product contains the following ingredient(s) which are regulated under the Clean Air Act Section 112 hazardous air
pollutants and is subject to all reporting requirements of CERCLA (Superfund). None.
10) TRANSPORTATION INFORMATION:
PROPER SHIPPING NAME: Non-regulated
DOT HAZARD CLASS: Non-regulated
21-84-2B
|