MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
PRODUCT IDENTIFICATION NUMBER (PIN):
PRODUCT IDENTIFIER
Oil of Sage - Clary (Natural) OS105X
PRODUCT USE
MANUFACTURERS NAME: SUPPLIERS NAME:
Xenex Labs XENEX LABORATORIES INC.
STREET ADDRESS: STREET ADDRESS:
2402 CANOE AVENUE
CITY: PROVINCE: CITY: PROVINCE:
COQUITLAM B.C.
POSTAL CODE: EMERGENCY TELEPHONE NO: POSTAL CODE: EMERGENCY TELEPHONE NO:
SPE100 V3K 6C2 (CHEMTREC) 1-800-424-9300
SECTION 2 - HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS % CAS NUMBER LD50 OF INGREDIENT
(SPECIFY SPECIES) (SPECIFY ROUTE AND DOSE)
Oil of Sage - Clary (Natural) 100 8016-63-5 Not Available Not Available
SECTION 3 - PHYSICAL DATA
PHYSICAL STATE APPEARANCE ODOR ODOR THRESHOLD (ppm)
Liquid Clear - Yellowish (Light) Floral, herbaceous character Not Available
MELTING POINT (C) BOILING POINT (C) VOLATILITY VAPOR PRESSURE VAPOR DENSITY
Not Available Not Available Not Available Not Available Not Available
pH SPECIFIC GRAVITY COEFF. WATER/OIL DIST. SOLUBILITY
Not Applicable 0.927 (Water=1) Not Available Insoluable in cold water, hot water
SECTION 4 - FIRE AND EXPLOSION DATA
NO YES
FLAMMABILITY IF YES, UNDER WHAT CONDITIONS?
Flammable Flammable in presence of open flames, sparks, of heat
MEANS OF EXTINCTION
SMALL: Use DRY chemical powder.
LARGE: Use water spray, fog or foam. Cool containing vessels with water jet in order to prevent pressure build-up, autoignition or
explosion.
UPPER FLAMMABLE LIMIT (% BY VOLUME)
FLASHPOINT (C) AND METHOD LOWER FLAMMABLE LIMIT (% BY VOLUME)
Closed cup 51.667掳C (125掳F) Not Available Not Available
AUTOIGNITION TEMPERATURE (C) HAZARDOUS COMBUSTION PRODUCTS
Not Available Acrid smoke and fumes
SECTION 5 - REACTIVITY DATA
YES NO IF NO, UNDER WHICH CONDITIONS?
CHEMICAL STABILITY
The product is stable - Keep away from excess heat, ignition sources (flames, sparks), incompatible materials
NO YES
INCOMPATIBILITY WITH OTHER SUBSTANCES IF SO, WHICH ONES?
Strong oxidizers
REACTIVITY, AND UNDER WHAT CONDITIONS
Not Available
HAZARDOUS DECOMPOSITION PRODUCTS
Not Available
MATERIAL SAFETY DATA SHEET
OS105X
PRODUCT IDENTIFIER
Oil of Sage - Clary (Natural)
SECTION 6 - TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY
INGESTION
INHALATION
SKIN CONTACT SKIN ABSORPTION EYE CONTACT
EFFECTS OF ACUTE EXPOSURE TO PRODUCT
Hazardous in case of ingestion. Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of inhalation. May cause moderate skin irritation.
Prolonged or repeated skin contact may cause allergic dermatits. May cause eye irritation. Breathing mist or vapor may cause respiratory tract irritation. May
cause digestive tract irrrtation.
The toxicological properties of this substance have not been fully investigated.
EFFECTS OF CHRONIC EXPOSURE TO PRODUCT
Repeated or prolonged exposure is not known to aggravate medical condition.
EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION OF PRODUCT CARCINOGENICITY
Not Available Yes Possible Not Available
REPRODUCTIVE TOXICITY MUTAGENICITY SYNERGISTIC PRODUCTS
TERATOGENICITY
Not Available Not Available Not Available Not Available
SECTION 7 - PREVENTATIVE MEASURE
PERSONAL PROTECTIVE EQUIPMENT
GLOVES (SPECIFY) RESPIRATOR (SPECIFY) EYE (SPECIFY)
Yes ( impervious ) Approved / Certified Vapor respirator Safety goggles, face shield
FOOTWEAR (SPECIFY) CLOTHING (SPECIFY) OTHER (SPECIFY)
No Coveralls / Lab coat Eyewash equipment nearby
ENGINEERING CONTROLS (SPECIFY eg. VENTILATION, ENCLOSED PROCESS)
Engineering Controls Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of
vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the
work-station location.
LEAK AND SPILL PROCEDURE
Flammable liquid, insoluble in water. Keep away from heat. Keep away from sources of ignition. Stop leak if without risk. Absorb with DRY earth, sand or other
non-combustible material. Do not get water inside container. Do not touch spilled material. Prevent entry into sewers, basements or confined areas; dike if
needed.
WASTE DISPOSAL
According to local, provincial, and federal regulations.
HANDLING PROCEDURES AND EQUIPMENT
Keep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not breathe gas/fumes/ vapor/spray. Wear suitable
protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If you feel unwell, seek medical attention and show the label when
possible. Avoid contact with skin and eyes.
STORAGE REQUIREMENTS
Store in a segregated and approved area. Keep container in a cool, well-ventilated area. Keep container tightly closed
and sealed until ready for use. Avoid all possible sources of ignition (spark or flame).
SPECIAL SHIPPING INFORMATION
No special requirements
SECTION 8 - FIRST AID MEASURES
SPECIFIC MEASURES
In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an
SKIN
emollient. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly
clean shoes before reuse. Get medical attention.
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of
EYES
water for at least 15minutes. Get medical attention
If inhaled remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give
INHALATION
oxygen. Get medical attention.
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by
INGESTION
mouth to an unconscious person. If large quantities of this material are swallowed, call a physician
immediately. Loosen tight clothing such as a collar, tie, belt or waistband.
IF IRRITATION PERSISTS AND IN ALL OTHER CASES, GET IMMEDIATE MEDICAL ATTENTION.
SECTION 9 - PREPARATION DATE OF M.S.D.S.
PREPARED BY (GROUP, DEPARTMENT, ETC.) PHONE NUMBER DATE:
CONTROL DEPARTMENT (604) 552 3031 October 23 2006
|