Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

85-83-6

File Name: xenexlabs_com---msds.su050x.asp
                                    MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
PRODUCT IDENTIFICATION NUMBER (PIN):
PRODUCT IDENTIFIER
Sudan IV SU050X
PRODUCT USE

MANUFACTURERS NAME: SUPPLIERS NAME:
Xenex Labs XENEX LABORATORIES INC.
STREET ADDRESS: STREET ADDRESS:
2402 CANOE AVENUE
CITY: PROVINCE: CITY: PROVINCE:
COQUITLAM B.C.
POSTAL CODE: EMERGENCY TELEPHONE NO: POSTAL CODE: EMERGENCY TELEPHONE NO:
SPE100 V3K 6C2 (CHEMTREC) 1-800-424-9300
SECTION 2 - HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS
% CAS NUMBER LD50 / LC50 OF INGREDIENT
/ CHEMICAL FORMULA
(SPECIFY SPECIES) (SPECIFY ROUTE AND DOSE)

Sudan IV 100 85-83-6 Not Available Not Available
C24H20N4O




SECTION 3 - PHYSICAL DATA
PHYSICAL STATE AND APPEARANCE ODOR TASTE ODOR THRESHOLD (ppm)
Solid (Red. Brown. (dark.)) Not Available Not Available Not Available
MELTING POINT (C) BOILING POINT (C) VAPOR PRESSURE VAPOR DENSITY VOLATILITY
190掳C (374掳F) Not Available Not Applicable Not Available Not Available
pH SPECIFIC GRAVITY COEFF. WATER/OIL DIST. DISPERSION PROPERTIES / SOLUBILITY
Not Available Not Available Not Available Insoluble in cold water
SECTION 4 - FIRE AND EXPLOSION DATA
NO YES
FLAMMABILITY IF YES, UNDER WHAT CONDITIONS?
May be combustible at high temperature

MEANS OF EXTINCTION
SMALL: Use DRY chemical powder.
LARGE: Use water spray, fog or foam. Do NOT use water jet.
FLASHPOINT (C) AND METHOD FLAMMABLE LIMITS (% BY VOLUME) CRITICAL TEMPERATURE
Closed Cup >93.3掳C (200掳F) UPPER: Not Available LOWER: Not Available Not Available
AUTOIGNITION TEMPERATURE (C) HAZARDOUS COMBUSTION PRODUCTS
Not Available (CO,CO2,NO,NO2)Oxides of carbon, nitrogen. Acrid smoke and fume
SECTION 5 - REACTIVITY DATA
YES NO IF NO, UNDER WHICH CONDITIONS?
CHEMICAL STABILITY
The product is stable

NO YES
INCOMPATIBILITY WITH OTHER SUBSTANCES IF SO, WHICH ONES?
Not Available

REACTIVITY, AND UNDER WHAT CONDITIONS
Not Available

HAZARDOUS DECOMPOSITION PRODUCTS
Not Available
MATERIAL SAFETY DATA SHEET
SU050X
PRODUCT IDENTIFIER
Sudan IV
SECTION 6 - TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY
INGESTION
INHALATION
SKIN CONTACT SKIN ABSORPTION EYE CONTACT
EFFECTS OF ACUTE EXPOSURE TO PRODUCT
Very hazardous in case of ingestion, of inhalation. Hazardous in case of skin contact (irritant), of eye contact (irritant).
Skin: May cause skin irritation.
Eyes: May cause eye irritation.
Inhalation: May cause irritation of the respiratory tract.
Ingestion: May be harmful if swallowed. May cause irritation of the gastrointestinal (digestive) tract.
EFFECTS OF CHRONIC EXPOSURE TO PRODUCT
CARCINOGENIC EFFECTS: 3 (Not classifiable for human.) by IARC.
MUTAGENIC EFFECTS: Mutagenic for mammalian somatic cells.
Repeated or prolonged exposure is not known to aggravate medical condition.
Very hazardous in case of ingestion, of inhalation. Hazardous in case of skin contact (irritant).
May affect genetic material.
Possible carcinogen (tumorigen) based on animal data
No information found other than it may affect genetic material and may be a possible carcinogen based on animal data.

SYNERGISTIC PRODUCTS
EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION OF PRODUCT
Not Available Yes Not Available Not Available
REPRODUCTIVE TOXICITY MUTAGENICITY
TERATOGENICITY CARCINOGENICITY
Not Available Not Available As Specified As Specified
SECTION 7 - PREVENTATIVE MEASURE
PERSONAL PROTECTIVE EQUIPMENT
GLOVES (SPECIFY) RESPIRATOR (SPECIFY) EYE (SPECIFY)
Yes ( impervious ) Approved / Certified respirator Safety goggles, face shield
FOOTWEAR (SPECIFY) CLOTHING (SPECIFY) OTHER (SPECIFY)
No Coveralls / Lab coat Eyewash equipment nearby
ENGINEERING CONTROLS (SPECIFY eg. VENTILATION, ENCLOSED PROCESS)
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below
recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
airborne contaminants below the exposure limit.
LEAK AND SPILL PROCEDURE
Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading
water on the contaminated surface.
WASTE DISPOSAL
According to local, provincial, and federal regulations.
HANDLING PROCEDURES AND EQUIPMENT
Keep locked up.. Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate
the residue under a fume hood. Ground all equipment containing material. Do not breathe dust. Wear suitable protective
clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If you feel unwell, seek medical attention
and show the label when possible. Avoid contact with skin and eyes.
STORAGE REQUIREMENTS
Keep container tightly closed. Keep container in a cool, dry, well-ventilated area. Container may be hazardous when
empty since they retain product residues (Dust, Solids) observe all warnings and precautions listed for the product
SPECIAL SHIPPING INFORMATION
Not a DOT controlled material
MATERIAL SAFETY DATA SHEET
SU050X
PRODUCT IDENTIFIER
Sudan IV
SECTION 8 - FIRST AID MEASURES
SPECIFIC MEASURES
Wash with soap and water. Cover the irritated skin with an emollient. Remove contaminated
SKIN
clothing and shoes. Get medical attention. Wash clothing before reuse, thoroughly clean shoes
before reuse.
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of
EYES
water for at least 15 minutes. Get medical attention
If inhaled remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give
INHALATION
oxygen. Get medical attention.
INGESTION Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Loosen tight clothing such as collar, tie, belt or waistband. If
large quantities of this material are swallowed, call a physician immediately. Get medical attention.

IF IRRITATION PERSISTS AND IN ALL OTHER CASES, GET IMMEDIATE MEDICAL ATTENTION.
SECTION 9 - PREPARATION DATE OF M.S.D.S.
All chemicals may pose unknown hazards and should be used with caution. This Material Safety Data Sheet (MSDS) applies only to the material as packa
If this product is combined with other materials, deteriorates, or becomes contaminated, it may pose hazards not mentioned in this MSDS. It shall be the us
responsibility to develop proper methods of handling and personal protection based on the actual conditions of use. While this MSDS is based on technical
data judged to be reliable, Xenex Laboratories Inc. assumes no responsibility for the completeness or accuracy of the information contained herein.


PREPARED BY (GROUP, DEPARTMENT, ETC.) PHONE NUMBER DATE:
CONTROL DEPARTMENT (604) 552 3031 June 27 2007

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
xenexlabs_com---msds.oa140x.asp 8007-70-3
xenexlabs_com---msds.ob135x.asp 8007-75-8
xenexlabs_com---msds.of100x.asp 8006-84-6
xenexlabs_com---msds.of120x.asp N/A
xenexlabs_com---msds.ol100x.asp 8008-28-0
xenexlabs_com---msds.ol110x.asp 8008-56-8
xenexlabs_com---msds.op150x.asp 8006-90-4
xenexlabs_com---msds.or140x.asp N/A
xenexlabs_com---msds.os105x.asp 8016-63-5
xenexlabs_com---msds.ot115x.asp 68647-73-4
xenexlabs_com---msds.oy160x.asp 8006-81-3
xenexlabs_com---msds.oz130x.asp 6153-56-6
xenexlabs_com---msds.oz150x.asp 131-57-7
xenexlabs_com---msds.pa113x.asp 13149-69-4 77700-02-8
xenexlabs_com---msds.pe110x.asp 8030-00-0 8006-90-4 64-17-5
xenexlabs_com---msds.pl100x.asp 25322-68-3
xenexlabs_com---msds.pl120x.asp 25322-68-3
xenexlabs_com---msds.re100x.asp 108-46-3
xenexlabs_com---msds.re110x.asp 102-29-4
xenexlabs_com---msds.re120x.asp 302-79-4
xenexlabs_com---msds.rf100x.asp 83-88-5
xenexlabs_com---msds.rh100x.asp 81-88-9
xenexlabs_com---msds.sa100x.asp 6155-57-3
xenexlabs_com---msds.sa120x.asp 69-72-7
xenexlabs_com---msds.se160x.asp N/A
xenexlabs_com---msds.sl115x.asp 7631-86-9 7732-18-5 7757-82-6
xenexlabs_com---msds.sl120x.asp 7761-88-8
xenexlabs_com---msds.so110x.asp 6131-90-4
xenexlabs_com---msds.so115x.asp 9005-38-3
xenexlabs_com---msds.so280x.asp 151-21-3
xenexlabs_com---msds.so310x.asp 7632-00-0
xenexlabs_com---msds.su050x.asp 85-83-6
xenexlabs_com---msds.sy100x.asp N/A
xenexlabs_com---msds.ta110x.asp 1401-55-4
xenexlabs_com---msds.ta120x.asp 87-69-4
xenexlabs_com---msds.ta130x.asp 107-35-7
xenexlabs_com---msds.te050x.asp 2451-01-6
xenexlabs_com---msds.te120x.asp 136-47-0
xenexlabs_com---msds.te130x.asp 64-75-5
xenexlabs_com---msds.th060x.asp 58-55-9
xenexlabs_com---msds.th100x.asp 67-03-8
xenexlabs_com---msds.tr210x.asp 64-17-5 57-55-6 2174-16-5
xenexlabs_com---msds.transderma_plo_gel.asp N/A
xenexlabs_com---msds.ur100x.asp 57-13-6
xenexlabs_com---msds.va100x.asp 8008-88-6 64-17-5
xenexlabs_com---msds.va115x.asp 27774-13-6
xenexlabs_com---msds.va125x.asp N/A
xenexlabs_com---msds.wh100x.asp 8009-03-8
xenexlabs_com---msds.wt120x.asp 64-17-5
xenexlabs_com---msds.wt130x.asp 68988-92-1 7778-77-0 7558-79-4 67-56-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC