MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
PRODUCT IDENTIFICATION NUMBER (PIN):
PRODUCT IDENTIFIER
Resorcinol Monoacetate RE110X
PRODUCT USE
MANUFACTURERS NAME: SUPPLIERS NAME:
Xenex Labs XENEX LABORATORIES INC.
STREET ADDRESS: STREET ADDRESS:
2402 CANOE AVENUE
CITY: PROVINCE: CITY: PROVINCE:
COQUITLAM B.C.
POSTAL CODE: EMERGENCY TELEPHONE NO: POSTAL CODE: EMERGENCY TELEPHONE NO:
SPE100 V3K 6C2 (CHEMTREC) 1-800-424-9300
SECTION 2 - HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS
% CAS NUMBER LD50 / LC50 OF INGREDIENT
/ CHEMICAL FORMULA
(SPECIFY SPECIES) (SPECIFY ROUTE AND DOSE)
Resorcinol Monoacetate 100 102-29-4 Not Available Not Available
C8H8O3
SECTION 3 - PHYSICAL DATA
PHYSICAL STATE AND APPEARANCE ODOR TASTE ODOR THRESHOLD (ppm)
Liquid (Amber Oily liquid) Not Available Not Available Not Available
BOILING POINT (C) VAPOR PRESSURE VAPOR DENSITY VOLATILITY
Decomposes 283掳C (541.4掳F) Not Available Not Available Not Available
pH SPECIFIC GRAVITY COEFF. WATER/OIL DIST. DISPERSION PROPERTIES / SOLUBILITY
Soluble in methanol, acetone. Partially soluble in cold water.
Not Available 1.205 Not Available
SECTION 4 - FIRE AND EXPLOSION DATA
NO YES
FLAMMABILITY IF YES, UNDER WHAT CONDITIONS?
May be combustible at high temperature
MEANS OF EXTINCTION
SMALL: Use DRY chemical powder.
LARGE: Use water spray, fog or foam. Do NOT use water jet.
FLASHPOINT (C) AND METHOD FLAMMABLE LIMITS (% BY VOLUME) CRITICAL TEMPERATURE
Not Available UPPER: Not Available LOWER: Not Available Not Available
AUTOIGNITION TEMPERATURE (C) HAZARDOUS COMBUSTION PRODUCTS
Not Available (CO,CO2) Oxides of carbon. Acrid smoke and fume
SECTION 5 - REACTIVITY DATA
YES NO IF NO, UNDER WHICH CONDITIONS?
CHEMICAL STABILITY
The product is stable
NO YES
INCOMPATIBILITY WITH OTHER SUBSTANCES IF SO, WHICH ONES?
Not Available
REACTIVITY, AND UNDER WHAT CONDITIONS
Not Available
HAZARDOUS DECOMPOSITION PRODUCTS
The products of degradation are more toxic.
MATERIAL SAFETY DATA SHEET
RE110X
PRODUCT IDENTIFIER
Resorcinol Monoacetate
SECTION 6 - TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY
INGESTION
INHALATION
SKIN CONTACT SKIN ABSORPTION EYE CONTACT
EFFECTS OF ACUTE EXPOSURE TO PRODUCT
Hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation.
EFFECTS OF CHRONIC EXPOSURE TO PRODUCT
The substance is toxic to the nervous system, liver, mucous membranes, gastrointestinal tract, cardiovascular system,
eye, lens or cornea.
Repeated or prolonged exposure to the substance can produce target organs damage.
Hazardous in case of skin contact (irritant), of ingestion, of inhalation.
SYNERGISTIC PRODUCTS
EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION OF PRODUCT
Not Available Yes Not Available Not Available
REPRODUCTIVE TOXICITY MUTAGENICITY
TERATOGENICITY CARCINOGENICITY
Not Available Not Available Not Available Not Available
SECTION 7 - PREVENTATIVE MEASURE
PERSONAL PROTECTIVE EQUIPMENT
GLOVES (SPECIFY) RESPIRATOR (SPECIFY) EYE (SPECIFY)
Yes ( impervious ) Approved / Certified respirator Safety goggles, face shield
FOOTWEAR (SPECIFY) CLOTHING (SPECIFY) OTHER (SPECIFY)
No Coveralls / Lab coat Eyewash equipment nearby
ENGINEERING CONTROLS (SPECIFY eg. VENTILATION, ENCLOSED PROCESS)
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their
respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station
location.
LEAK AND SPILL PROCEDURE
Dilute with water and op up, or absorb with an inert material and put the spilled material in an appropriate waste disposal.
Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
WASTE DISPOSAL
According to local, provincial, and federal regulations.
HANDLING PROCEDURES AND EQUIPMENT
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue
under a fume hood. Ground all equipment containing material. Do not breathe gas/fumes/ vapor/spray. Wear suitable
protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If you feel unwell, seek
medical attention and show the label when possible. Avoid contact with skin and eyes. Keep away from incompatibles.
STORAGE REQUIREMENTS
Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly closed. Keep
in a cool, well-ventilated place. Combustible materials should be stored away from extreme heat and away from strong
oxidizing agents. Container may be hazardous when empty since they retain product residues observe all warnings and
precautions listed for the product.
SPECIAL SHIPPING INFORMATION
Not a DOT controlled material
MATERIAL SAFETY DATA SHEET
RE110X
PRODUCT IDENTIFIER
Resorcinol Monoacetate
SECTION 8 - FIRST AID MEASURES
SPECIFIC MEASURES
After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the
SKIN
contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds,
crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. If
irritation persists, seek medical attention. Wash contaminated clothing before reusing.
Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15
EYES
minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical
attention.
If inhaled remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give
INHALATION
oxygen. Get medical attention.
Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is
INGESTION
not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
IF IRRITATION PERSISTS AND IN ALL OTHER CASES, GET IMMEDIATE MEDICAL ATTENTION.
SECTION 9 - PREPARATION DATE OF M.S.D.S.
All chemicals may pose unknown hazards and should be used with caution. This Material Safety Data Sheet (MSDS) applies only to the material as packa
If this product is combined with other materials, deteriorates, or becomes contaminated, it may pose hazards not mentioned in this MSDS. It shall be the us
responsibility to develop proper methods of handling and personal protection based on the actual conditions of use. While this MSDS is based on technical
data judged to be reliable, Xenex Laboratories Inc. assumes no responsibility for the completeness or accuracy of the information contained herein.
PREPARED BY (GROUP, DEPARTMENT, ETC.) PHONE NUMBER DATE:
CONTROL DEPARTMENT (604) 552 3031 July 23 2007
|