MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
PRODUCT IDENTIFICATION NUMBER (PIN):
PRODUCT IDENTIFIER
SYRUP NF SY100X
PRODUCT USE
MANUFACTURERS NAME: SUPPLIERS NAME:
Xenex Labs XENEX LABORATORIES INC.
STREET ADDRESS: STREET ADDRESS:
2402 CANOE AVENUE
CITY: PROVINCE: CITY: PROVINCE:
COQUITLAM B.C.
POSTAL CODE: EMERGENCY TELEPHONE NO: POSTAL CODE: EMERGENCY TELEPHONE NO:
SPE100 V3K 6C2 (CHEMTREC) 1-800-424-9300
SECTION 2 - HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS
% CAS NUMBER LD50 / LC50 OF INGREDIENT
/ CHEMICAL FORMULA
(SPECIFY SPECIES) (SPECIFY ROUTE AND DOSE)
SYRUP NF 100 Not Available Not Available Not Available
SECTION 3 - PHYSICAL DATA
PHYSICAL STATE AND APPEARANCE ODOR TASTE ODOR THRESHOLD (ppm)
Liquid (Clear Viscous) Not Available Sweet Not Available
MELTING POINT (C) BOILING POINT (C) VAPOR PRESSURE VAPOR DENSITY VOLATILITY
Not Available Not Available Not Available Not Available Not Available
pH SPECIFIC GRAVITY COEFF. WATER/OIL DIST. DISPERSION PROPERTIES / SOLUBILITY
Not Available 卤 1.3 Not Available Easily soluble in cold water, hot water.
SECTION 4 - FIRE AND EXPLOSION DATA
NO YES
FLAMMABILITY IF YES, UNDER WHAT CONDITIONS?
May be combustible at high temperature
MEANS OF EXTINCTION
SMALL: Use DRY chemical powder.
LARGE: Use water spray, fog or foam. Do NOT use water jet.
FLASHPOINT (C) AND METHOD FLAMMABLE LIMITS (% BY VOLUME) CRITICAL TEMPERATURE
Not Available UPPER: Not Available LOWER: Not Available Not Available
AUTOIGNITION TEMPERATURE (C) HAZARDOUS COMBUSTION PRODUCTS
Not Available Not Available
SECTION 5 - REACTIVITY DATA
YES NO IF NO, UNDER WHICH CONDITIONS?
CHEMICAL STABILITY
The product is stable
NO YES
INCOMPATIBILITY WITH OTHER SUBSTANCES IF SO, WHICH ONES?
Not Available
REACTIVITY, AND UNDER WHAT CONDITIONS
Not Available
HAZARDOUS DECOMPOSITION PRODUCTS
Possibly hazardous short term products are not likely. However, long term degradation products may arise. The
porducts of degradation are more toxic.
MATERIAL SAFETY DATA SHEET
SY100X
PRODUCT IDENTIFIER
SYRUP NF
SECTION 6 - TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY
INGESTION
INHALATION
SKIN CONTACT SKIN ABSORPTION EYE CONTACT
EFFECTS OF ACUTE EXPOSURE TO PRODUCT
Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation.
EFFECTS OF CHRONIC EXPOSURE TO PRODUCT
Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation.
Repeated or prolonged exposure is not known to aggravate medical condition.
SYNERGISTIC PRODUCTS
EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION OF PRODUCT
Not Available Not Available Not Available Not Available
REPRODUCTIVE TOXICITY MUTAGENICITY
TERATOGENICITY CARCINOGENICITY
Not Available Not Available Not Available Not Available
SECTION 7 - PREVENTATIVE MEASURE
PERSONAL PROTECTIVE EQUIPMENT
GLOVES (SPECIFY) RESPIRATOR (SPECIFY) EYE (SPECIFY)
Yes ( impervious ) No Safety goggles, face shield
FOOTWEAR (SPECIFY) CLOTHING (SPECIFY) OTHER (SPECIFY)
No Coveralls / Lab coat Eyewash equipment nearby
ENGINEERING CONTROLS (SPECIFY eg. VENTILATION, ENCLOSED PROCESS)
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that
eyewash stations and safety showers are proximal to the work-station location.
LEAK AND SPILL PROCEDURE
Dilute with water and mop up or absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by spreading water
on the contaminated surface and allow to evacuate through the sanitary system.
WASTE DISPOSAL
According to local, provincial, and federal regulations.
HANDLING PROCEDURES AND EQUIPMENT
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment
containing material. Do not breathe gas/fumes/ vapor/spray. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory
equipment. If you feel unwell, seek medical attention and show the label when possible. Avoid contact with skin and eyes. Keep away from incompatibles.
STORAGE REQUIREMENTS
Keep container tightly closed. Keep container in a cool, dry, well-ventilated area. Container may be hazardous when empty since they retain product residues
observe all warnings and precautions listed for the product.
SPECIAL SHIPPING INFORMATION
Not a DOT controlled material
SECTION 8 - FIRST AID MEASURES
SPECIFIC MEASURES
SKIN Wash with soap and water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Get medical
attention if irritation develops. Wash clothing before reuse, thoroughly clean shoes before reuse.
EYES Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes.
Get medical attention if irritation occurs.
INHALATION If inhaled remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
INGESTION Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious perso
Loosen tight clothing such as collar, tie, belt or waistband. Get medical attention if symptoms appear.
IF IRRITATION PERSISTS AND IN ALL OTHER CASES, GET IMMEDIATE MEDICAL ATTENTION.
SECTION 9 - PREPARATION DATE OF M.S.D.S.
All chemicals may pose unknown hazards and should be used with caution. This Material Safety Data Sheet (MSDS) applies only to the material as packa
If this product is combined with other materials, deteriorates, or becomes contaminated, it may pose hazards not mentioned in this MSDS. It shall be the us
responsibility to develop proper methods of handling and personal protection based on the actual conditions of use. While this MSDS is based on technical
data judged to be reliable, Xenex Laboratories Inc. assumes no responsibility for the completeness or accuracy of the information contained herein.
PREPARED BY (GROUP, DEPARTMENT, ETC.) PHONE NUMBER DATE:
CONTROL DEPARTMENT (604) 552 3031 March 26 2008
|